Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.     

Effect of Support Materials on the Selective Methanation of CO over Ru Catalysts

Selective methanation of CO in the reformate gas (CO/CO₂/H₂/H₂O = 0.175/17.9/70.9/11.1) proceeded over Ru catalysts supported on metal oxides and zeolites. CO was selectively methanated at wide temperature ranges (200–275 °C) over Ru/γ-Al₂O₃, Ru/TiO₂ Ru/H-Y and Ru/H-beta catalysts. Higher Ru contents in Ru/γ-Al₂O₃ improved the selective CO methanation rate.     

Purification and Characterization of Organic Solvent and Detergent Tolerant Lipase from Thermotolerant Bacillus sp. RN2

The aim of this study was to characterize the organic solvent and detergent tolerant properties of recombinant lipase isolated from thermotolerant Bacillus sp. RN2 (Lip-SBRN2). The isolation of the lipase-coding gene was achieved by the use of inverse and direct PCR. The complete DNA sequencing of the gene revealed that the lip-SBRN2 gene contains 576 nucleotides which corresponded to 192 deduced amino acids. The purified enzyme was homogeneous with the estimated molecular mass of 19 kDa as determined by SDS-PAGE and gel filtration. The Lip-SBRN2 was stable in a pH range of 9-11 and temperature range of 45-60 °C. The enzyme was a non metallo-monomeric protein and was active against pNP-caprylate (C8) and pNP-laurate (C12) and coconut oil. The Lip-SBRN2 exhibited a high level of activity in the presence of 108% benzene, 102.4% diethylether and 112% SDS. It is anticipated that the organic solvent and detergent tolerant enzyme secreted by Bacillus sp. RN2 will be applicable as catalysts for reaction in the presence of organic solvents and detergents.     

A neck‐in model in extrusion lamination process

In this study, the experiment of the extrusion lamination process using high‐pressure process low‐density polyethylene (LDPE) was performed. The nonisothermal viscoelastic simulation of the extrusion lamination experiment was also carried out. The simulation results were in good agreement with the experimental data within wide range of take up velocity and air gap length. We developed the theoretical model based on force balance and deformation type of a film to predict the neck‐in behavior in the extrusion lamination or cast film process. It was suggested from the neck‐in model that the neck‐in correlates with the ratio of planar to uniaxial elongational viscosity. It was confirmed that the neck‐in model could predict the film edge shape and neck‐in properly for conventional LDPE. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Control design of a pneumatic cylinder with distributed model of pipelines

In this paper, the control design with distributed model of pipelines is proposed to make the cylinder side be free of pressure sensors. In this research, long connected pipelines are used. The pipeline is designed as a one dimensional distributed model. The model of pipelines is based on the discretization of four equations, as state equation of air, motion equation, continuity equation, and energy equation. The distributed model estimates the pressure losses and time delay through long connected pipelines in real time. To confirm the control method with distributed model of pipelines, a simulation model of the whole system is designed. Compared simulation and experimental results, it has been found that the model represents the real system well. In the experiments, the pressure values in the cylinder chambers estimated by the distributed model in real time played as control signals. Compared with the estimated and measured pressure values in the cylinder chambers, it is found that with this distributed model, the pressure values in the cylinder chambers is precisely estimated in real time using the measured values at the control ports of the servo valve. The experimental results demonstrate that the position accuracy is almost the same with that of using the measured pressure signals in the cylinder chambers. The cylinder side is free of pressure sensors with the proposed control method.     

The leveling of thermosetting waterborne coatings. Part II: Drying of coated wet films

Evaporation behavior of water/solvent blends was estimated using the universal functional activity coefficient, UNIFAC, method. The evaporation rate from a free surface of a waterborne coating, WBC, containing a co-solvent was experimentally determined. These results were used to estimate the evaporation rate from wet films of a WBC containing a variety of co-solvents with a range of initial thickness. Knowing the composition of the WBC during the drying process, the change in the viscosity and the surface tension was determined. The results strongly support the development of a surface tension gradient in the film. It is also suggested that a surface tension gradient would accelerate the leveling of the ribs if a proper co-solvent were employed.     

EXPERIMENTAL AND NUMERICAL STUDY ON GAS FLOW IN THE GRID ZONE OF JETTING-FLUIDIZED BEDS

A grid model describing the gas flow and interchange in the grid zone of jetting fluidized beds is proposed. Based on this model, longitudinal gas concentration profiles in the jet and annulus are calculated. The longitudinal gas concentration distribution is also experimentally investigated in a jetting fluidized bed with an inside diameter of 50 mm at the ambient temperature, and a jetting fluidized bed with an inside diameter of 80 mm at high temperatures. Comparison between the calculated and experimental results has shown that the experimental profiles can be qualitatively predicted by the grid model. The results indicated that the concentration in the grid zone depends on the gas exchange between the jet and the annulus, and the net gas flow from the jet to the annulus. The gas exchange rate is mainly affected by the inlet gas velocity from the nozzle. The present study is thought to be helpful to understand the grid gas behavior in the jetting fluidized bed coal gasifier.     

Effects of carbon content and ausaging on γ ↔ α′ transformation behavior and reverse-transformed structure in Fe-Ni-Co-Al-C alloys

The effects of carbon content and ausaging on austenite γ ↔ martensite (α′) transformation behavior and reverse-transformed structure were investigated in Fe-32Ni-12Co-4Al and Fe-(26,28)Ni-12Co-4Al-0.4C (wt pct) alloys. TheM _s temperature, the hardness of γ phase, and the tetragonality of α′ increase with increasing ausaging time, and these values are higher in the carbon-bearing alloys in most cases. The γ → α′ transformation behavior is similar to that of thermoelastic martensite; that is, the width of α′ plate increases with decreasing temperature in all alloys. The αt’ → γ reverse transformation temperature is lower in the carbon-bearing alloys, which means that the shape memory effect is improved by the addition of carbon. The maximum shape recovery of 84 pct is obtained in Fe-28Ni-12Co-4Al-0.4C alloy when the ausaged specimen is deformed at theM _s temperature and heated to 1120 K. There are two types of reverse-transformed austenites in the carbon-bearing alloy. One type is the reversed y containing many dislocations which were formed when the γ/α′ interface moved reversibly. The plane on which dislocations lie is (01 l)_γ if the twin plane is (112)_α′. The other type of reverse-transformed austenite exhibits γ islands nucleated within the α′ plates.     

E2011 a novel, selective and reversible inhibitor of monoamine oxidase type A

E2011, (5R)-3-[2-((1S)-3-cyano-1hydroxypropyl)benzothiazol- 6-yl]-5-methoxymethyl-2-oxazolidine, is a novel inhibitor of monoamine oxidase type A (MAO-A). We have characterized the neurochemical and pharmacological profiles of E2011 and compared them with those of known inhibitors of MAO-A. E2011 potently inhibited MAO-A with more than 30,000 times higher selectivity for MAO-A relative to MAO-B in rat brain homogenate. E2011 did not affect putative neural receptors or reuptake of biogenic amines into synaptosomes of rat brain, which suggests that it is specific to monoaminergic systems. In vivo, E2011 at a dose of 0.3 mg/kg p.o. exhibited potent MAO-A inhibitory activity, whereas MAO-B inhibition was not observed even at 100 mg/kg p.o. E2011 inhibited monoamine metabolism in the rat brain, but the effect disappeared 24 h after administration. Like other reversible MAO-A inhibitors, E2011 did not show a cumulative inhibitory effect during repeated administration for 7 days. However, inhibition of MAO-A by E2011 in ex vivo experiments appeared to be less potent than that by moclobemide. The MAO-A inhibition by E2011 was partially but significantly reversed by dialysis at 4 degrees C for 24 h, which indicates that E2011 could be dissociated from the enzyme. These findings suggest that E2011 is a reversible and highly selective inhibitor of MAO-A. The potency of inhibition by highly reversible MAO-A inhibitors such as E2011 is likely to be underestimated in ex vivo studies because of dilution of the homogenate in the assay system.     

Isolation and characterization of hardening-induced proteins in Chlorella vulgaris C-27: identification of late embryogenesis abundant proteins

Hardening-induced soluble proteins of Chlorella vulgaris Beijerink IAM C-27 (formerly Chlorella ellipsoidea Gerneck IAM C-27) were isolated and purified by two-dimensional high-performance liquid chromatography (2D-HPLC) on an anion-exchange column, with subsequent reversed-phase chromatography. Some of the proteins were resolved by SDS-PAGE, characterized by amino-terminal sequencing and identified by searching for homologies in databases. Separation of the soluble proteins during the hardening of Chlorella by a combination of 2D-HPLC and SDS-PAGE revealed that at least 31 proteins were induced or increased in abundance. Of particular interest was the induction after 12 h of a 10-kDa protein with the amino-terminal amino acid sequence AGNKPITEQISDAVGAAGQKVG and the induction after 6 h of a 14-kDa protein with the amino-terminal sequence ALGEESLGDKAKNAFEDAKDAVKDAAGNVKEAV. The amino-terminal sequences of these proteins indicated that they were homologous to late embryogenesis abundant (LEA) proteins. Furthermore, the level of a 22-kDa protein also increased after 12 h. The amino-terminal sequence of this protein, AAPLVGGPAPDFTAAAVFD, indicated that it was homologous to thioredoxin peroxidase.