Effects of cyclic tensile loading on the rupture behavior of orthogonal 3-D woven SiC fiber/SiC matrix composites at elevated temperatures in air

This study examined the rupture mechanisms of an orthogonal 3D woven SiC fiber/BN interface/SiC matrix composite under combination of constant and cyclic tensile loading at elevated temperature in air. Monotonic tensile testing, constant tensile load testing, and tension–tension fatigue testing were conducted at 1100 °C. A rectangular waveform was used for fatigue testing to assess effects of unloading on the damage and failure behavior. Microscopic observation and single-fiber push-out tests were conducted to reveal the rupture mechanisms. Results show that both oxidative matrix crack propagation attributable to oxidation of the fiber–matrix interface and the decrease in the interfacial shear stress (IFSS) at the fiber–matrix interface significantly affect the lifetime of the SiC/SiC composites. A rupture strength degradation model was proposed using the combination of the oxidative matrix crack growth model and the IFSS degradation model. The prediction roughly agreed with the experimentally obtained results.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Experimental study on the hazards of the jet diffusion flame of liquefied dimethyl ether

Dimethyl ether (DME) has been considered as a substitute for diesel fuel because it has a low auto-ignition temperature and produces less NO_x, SO_x, and particulate matter. However, the introduction of DME vehicles needs widely available DME supply stations. Moreover, the preparation of safety regulations for DME supply stations is very important, and so safety data is needed. Therefore, the present paper reports the hazards of the DME jet diffusion flame, which is one of several hazardous properties of DME, by studying the results of leaking gas and liquid DME. DME jets were released horizontally from circular nozzles whose diameters were 0.2, 0.4, 0.8 and 2 mm, and the release pressure was varied from the saturated vapor pressure to 2 MPa. When gaseous DME was released at the saturated vapor pressure, the flame was blown out. However, when liquefied DME was released, the flame formed. We obtained the experimental equations for estimating the scale and thermal hazards of DME diffusion flames.     

Fabrication of chemically bonded polyacrylate/silica hybrid films with high silicon contents by the sol–gel method

Polyacrylate/silica hybrid latexes (PAES) with high silicon contents (up to 21%) were prepared by directly mixing colloidal silica with polyacrylate emulsion (PAE) modified by a silane coupling agent. Sol–gel-derived organic/inorganic thin films were obtained by addition of hydrophilic co-solvents to PAES and subsequent drying at room temperature. The effects of co-solvents and γ-methacryloxypropyltrimethoxysilane (KH570) content on the properties of PAES films were investigated. Dynamic light scattering (DLS) data indicated that the average diameter of PAES (96 nm) was slightly larger than that of PAE (89 nm). TEM photo revealed that colloidal silica particles were dispersed uniformly around polyacrylate particles and that some of the colloidal silica particles were adsorbed on the surface of PAE particles. The data of crosslinking degree and FT-IR spectra confirmed that the chemical structure of the PAES changed to form Si–O–Si-polymer crosslinking networks during the film formation. AFM photos, contact angle for water, and XPS analysis showed that the polyacrylate/inorganic hybrid films with high silicon contents were formed by the co-solvent-mediated, sol–gel method and that the Si-based polymers were uniformly distributed on the surface of the dried films. TGA data demonstrated that the PAES films display much better thermal stability than the PAE counterpart.     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

Breakdown Phenomena in Point-to-Point Gaps

Measurements with multiple techniques delineating the complete sequence of events from the primary streamer to the formation of the spark channel for relatively small point-to-point gaps are reported. The pulsed potential with 0.4 μs rise time and 1800 μs decay time was applied to the point-to-point gap, of which length was changed from 6 to 14 cm. The light pulses were observed by 5 photomultipliers as well as current and potential wave. It is shown that the spark channel can be materialized through the following three processes: 1) initial process, in which the primary, the secondary, and the tertiary streamers develop from both point electrodes into gap, and the ionizing wave bridges the gap; 2) intermediate process, in which the dark period proceeds with ion and electron movement if the applied potential is around the mean breakdown potential, or in the other case, the ``leader' develops from the anode with the help of ionizing waves; and 3) final process, in which the channel is highly ionized at first by the ionizing wave, then gas heating, to lead the formation of a spark channel. On the bases of the measurements of streamer speed and current, the ion and electron density were calculated. It is estimated that starting with the primary streamer with an electron density of 1012 cm-3, the electron density in the streamer channel is augmented by the ionizing wave up to 1012cm -3 when the gap is bridged by the ionizing wave.     

The dilute solution properties of maleic anhydride and maleic acid copolymers: 1. Light scattering, osmotic pressure and viscosity measurements

Dilute solution behaviour of poly(maleic anhydride-co-ethyl vinyl ether) and poly(maleic acid-co-ethyl vinyl ether) has been investigated by light scattering, osmotic pressure, and viscosity measurements. The molecular weights ($\text{M}\text{?}{}_{\mathrm{w}}$ and $\text{M}\text{?}{}_{\mathrm{n}}$), the second virial coefficients A₂, and the intrinsic viscosities [η] have been determined for three states of this copolymer: anhydride-form, H-form, and Na-salt independently. The constants in the Mark-Houwink relations were obtained for the above three states under different solvent conditions. The molecular weight of the anhydride-form is found to be higher than that of the acid-form or the Na-salt, suggesting the degradation in a process of hydrolysis. The second virial coefficient A₂ as well as the Mark-Houwink relation indicates that the anhydride-form and H-form behave as flexible polymer chains in good solvents. However, the polymer coil of Na-salt is highly expanded even at saturated NaCl concentration.     

Reduction and Sintering of a Nickel–Dispersed-Alumina Composite and Its Properties

High-density nickel–dispersed-alumina (Al₂O₃/nickel) composites with superior mechanical properties were obtained by the hydrogen reduction and the hot pressing of alumina–nickel oxide (Al₂O₃/NiO) mixed powders. The mixtures were prepared by using NiO or nickel nitrate (Ni(NO₃)₂· n H₂O) as a dispersion source of nickel metal. Microstructural investigations of the composite fabricated using nitrate powder revealed that fine nickel particles, } 100 nm in diameter, dispersed homogeneously at the matrix grain boundaries, forming the intergranular nanocomposite. High strength (.1 GPa) and high-temperature hardness were registered for the composite that contained a small amount of nickel dispersion. The ferromagnetic properties of nickel, such as high coercive force, were observed, because of the fine magnetic dispersions, which indicates a functional value of structural composites.     

The effects of infusion of trieicosapentaenoyl-glycerol emulsion on extravascular lung water during myocardial ischemia and reperfusion in dogs

To test the effects of eicosapentaenoic acid (EPA) infusion on pulmonary edema induced by coronary ligation and reperfusion, extravascular lung water (EVLW) was measured in situ by the thermal-dye double indicator dilution method in dogs. In the control group of five dogs, 30 mL of a 10% soybean oil emulsion was infused through a leg vein. One hour after infusion, the left anterior descending coronary artery below the first diagonal branch was ligated for 15 min and then reperfused for 30 min. In the EPA group, six dogs were similarly treated with an emulsion of a 10% trieicosapentaenoyl-glycerol (90% pure). EVLW, pulmonary capillary wedge pressure, mean pulmonary artery pressure, mean blood pressure, and cardiac index were measured before and 15 min after coronary ligation, and 15 min and 30 min after coronary reperfusion. There were no significant differences in the hemodynamic indices between the two groups. EVLW significantly increased up to two times of baseline during coronary ligation in the control group (P< 0.05) and more during reperfusion (P<0.01), whereas EVLW did not increase in the EPA group. In conclusion, EPA inhibited EVLW accumulation and may be useful for ameliorating one of the ischemia-reperfusion-induced complications, pulmonary edema.     

Optical resolution of racemic amino acid derivatives with chiral polyamides bearing glutamyl residue as a diacid component

Novel chiral polyamides with chiral environment in their main chains were obtained from aromatic diamine, 4,4′‐diaminodiphenylmethane (DADPM), and the D ‐isomer or the L ‐isomer of N‐α‐protected glutamic acid, such as N‐α‐benzyloxycarbonyl‐D ‐glutamic acid (Z‐D ‐Glu‐OH) or N‐α‐benzyloxycarbonyl‐L ‐glutamic acid (Z‐L ‐Glu‐OH), in the presence of triphenyl phosphite (TPP). Two types of newly prepared polyamide showed optical rotation, implying that there were asymmetric carbons in their main chains. Circular dichroism studies demonstrated that resulting chiral poly‐ amides took a helical structure. Optical resolution ability of those two types of polyamide was studied by adopting potential difference as a driving force for membrane transport. Membranes showed permselectivity toward racemic mixture of N‐α‐acetyltryptophan (Ac‐Trp). The permselectivity was dependent on the absolute configuration of diacid component. The permselectivity was expressed by diffusivity selectivity, which was determined by the presence of chiral helicity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011