Novel process for cover glass with ideal stress distribution

Abstract — This paper proposes a new process to manufacture cover glass that overcomes a strength trade‐off between the face and the edge. In the process, alkali barrier films are deposited on glass faces before an ion exchange process in order to control face stress properties without inhibiting the edge strengthening. As a demonstration of the process, alkali‐alumino‐silicate glass sheets with sputter‐deposited SiO₂ films were chemically strengthened, and then their stress properties and strengths were investigated. As a result, thicker SiO₂ films cause lower face DOL (depth of strengthened layer), and it is observed that the faces have lower DOL than the edges. In strength tests corresponding to major fracture modes of smartphone cover glass, specimens with 80–100 nm films have more balanced face performance and better edge impact strengths than the no‐film specimen.     

Thermodynamics of calcium and oxygen in molten titanium and titanium-aluminum alloy

The deoxidation equilibrium of molten titanium and titanium-aluminum alloys saturated with solid CaO has been measured in the temperature range from 1823 to 2023 K. The equilibrium constant of reaction CaO (s)=Ca (mass pct in Ti,Ti-Al)+O (mass pct in Ti,Ti-Al) and the interaction parameter between calcium and oxygen were determined for Ti, TiAl, and TiAl₃. The standard Gibbs energy of reaction for TiAl was obtained as follows: $$\Delta G^\circ = 279,000 - 103TJ/mol$$ The possibilities for the deoxidation of titanium and titanium-aluminum alloys by using calcium-based fluxes are discussed.     

Fabrication of sub-micron structures for MEMS using deep X-ray lithography

Fabrication techniques of microstructures with high resolution and high aspect ratio are necessary for practical microelectromechanical systems (MEMS) that have high performance and integration. In order to fabricate microstructures with sub-micron resolution and high aspect ratio, deep X-ray lithography has been investigated using the compact synchrotron radiation (SR) light source called “AURORA”. An X-ray mask for sub-micron deep X-ray lithography, which is composed of 1 μm thick Au as absorbers, 2 μm thick SiC as a membrane and 625 μm thick Si as a frame, was designed. In preliminary experiments, the following results were achieved: EB resist microstructures with an aspect ratio of 22 corresponding with 0.07 μm width and 1.3 μm height were formed; a 10 μm thick PMMA resist containing no warp was formed by direct polymerization, enabling more precise gap control.     

An Estimation of Complexity and Computational Costs for Vertical Block-Cyclic Distributed Parallel LU Factorization

The Vertical Block–cyclic Distributed Parallel LU Factorization Method (VBPLU) is effectively processed on a distributed memory parallel computer. VBPLU is based on the two techniques, the block algorithm and the aggregation of communications. Since startup time dominates the data communication and the aggregation reduces communication isssues, the total performance has been much improved. Furthermore this method uses long vectors so that it is also advantageous on vector processors. In this paper, we have constructed a modeling of VBPLU using a simplified LogGP model with analytical formulae, and estimated accurately the computational cost taking into account load distributions caused by data layout and process mapping. Some knowledge for optimization of block algorithm has been obtained. Our estimations have been verified through numerical experiments on three different distributed memory parallel computers.     

Nonlinear adaptive control system design and experiment for a 3-DOF model helicopter

This paper deals with model following control of a model helicopter with three degree-of-freedom. Since the decoupling matrix is singular, a nonlinear structure algorithm is used to design the controller. Furthermore, since the model dynamics are described linearly by unknown system parameters, a well-known parameter estimation technique is introduced. The integral type of estimation model is proposed here since the use of the derivative type of model cannot obtain the desired estimation result. The experimental results show the effectiveness of the proposed method. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

An atomic force microscope study of surface roughness of thin silicon films deposited on SiO/sub 2/

Atomic force microscope analysis, with a resolution of /spl lsim/1.1 nm, shows that peak-to-peak surface roughness (/spl Delta/h/sub p-p/) of amorphous silicon films thinner than /spl ap/50 nm on silicon dioxide can be controlled to better than 5 nm. Low-pressure, chemically-vapor-deposited silicon films on silicon dioxide initially show an approximately linear increase in the surface roughness due to growing nuclei as the deposition progresses, followed by a decrease in the surface roughness as growth nuclei coalesce. A simple model based on random nucleation and nuclei growth displays similar trends. Films deposited on rougher substrates show more surface roughness. Surface treatment during the predeposition cleaning process does not significantly affect /spl Delta/h/sub p-p/. As a means of producing smooth surfaces, films thinner than about 20 nm are first deposited more thickly than needed, and then etched back to the desired dimension; the use of a binary HNO/sub 3/ and HF etching process improves roughness control. Boron-ion implanted and subsequently crystallized 45-nm-thick Si films show significant smoothing with /spl Delta/h/sub p-p//spl ap/2.2 nm. Thin amorphous silicon films deposited by source evaporation are attractive because they can be deposited at room temperature, and have smoother surfaces (/spl Delta/h/sub p-p//spl ap/2.5 nm) than comparable films produced by chemical vapor deposition.     

Rolling and swaying motion estimation for a mobile robot by using omnidirectional optical flows

Described here is a method for estimating rolling and swaying motions of a mobile robot using optical flow. We have proposed an image sensor with a hyperboloidal mirror for the vision-based navigation of a mobile robot. Its name is HyperOmni Vision. The radial component of optical flow in HyperOmni Vision has a periodic characteristic. The circumferential component of optical flow has a symmetric characteristic. The proposed method makes use of these characteristic to estimate robustly the rolling and swaying motion of the mobile robot. Correspondence to: Y. Yagi e-mail: y-yagi@sys.es.osaka-u.ac.jp     

Czochralski growth of Yb doped oxyapatite for high power laser application

Ca₈(La,Yb)₂(PO₄)₆O₂ (Yb:CLPA) single crystals with the apatite-type structure could be grown from the melt using the Czochralski method. Grown crystal was 18 mm in diameter and 110 mm in length. It is transparent with slightly blue color. Neither visible inclusion nor crack was observed. Thermal conductivity of Yb:CLPA was calculated from the values of thermal diffusivity, heat capacity measurement and density. Luminescent characterization was carried out from the results of emission, absorption and Raman spectrum.