Facile synthesis and thermal properties of waterglass-based silica xerogel nanocomposites containing reduced graphene oxide

In this study, new rGO-silica xerogel nanocomposites (SX-rGO) and its glass fiber reinforced composites (GFR-SX-rGO) were prepared, and its microstructure and thermal properties were evaluated. The raw material was a mixed dispersion prepared by adding 0.01–2.5?wt% of reduced graphene oxide (rGO) to waterglass (6% SiO₂). A hydrogel was prepared via sol-gel reaction of this raw material, which was then immersed in hydrochloric acid, hydrophobized in a siloxane/2-propanol reaction system, and then dried at ambient pressure to obtain a hydrophobic carbon-silica xerogel composite. The obtained samples were characterized by N₂ physisorption (at 77?K), solid ²⁹Si Magic angle spinning nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, differential scanning calorimetry, thermogravimetric analysis, hydrophobicity, and thermal conductivity. It was found that as the amount of rGO was increased, the specific surface area of the nanocomposite decreased by ~25% from 535 to 403?cm²/g, and the average pore size and pore volume were almost halved. The thermal decomposition temperature of the SX-rGO was increased markedly by the addition of rGO. Moreover, the GFR-SX-rGO-0.5 showed low density (0.208?g/cm³), high contact angle (146°) and low thermal conductivity (0.0199?W/mK).     

Superconductivity of Zr-Nb-Si amorphous alloys

Superconducting amorphous alloys with high strength and good ductility have been found in rapidly quenched alloys of the Zr-Nb-Si system. These alloys were produced in a continuous ribbon form of 1 to 2 mm width and 0.02 to 0.03 mm thickness using a modified single roller quenching apparatus. The amorphous alloys were formed over the whole composition range between zirconium and niobium, but the silicon content was limited to the relatively narrow range between about 12 and 24 at%. All the amorphous alloys showed a superconducting transition whose temperature, T _c, increased from 2.31 to 4.20 K with increasing niobium content or with decreasing silicon content. The upper critical magnetic field, H _c2, and the critical current density, J _c, for Zr₁₅Nb₇₀Si₁₅ alloy were of the order of 4.5 Tesla(T) and 5.5×10⁶ A m^–2 at 1.5 K in the absence of applied field. The upper critical field gradient at T _c, , and the electrical resistivity at 4.2 K, _n, decreased from 2.89 to 2.10 T K^–1 and from 2.70 to 1.80m, respectively, with the amount of niobium. The Debye temperature, _D, the electron-phonon coupling constant, , and the bare density of electronic states at the Fermi level, N(E _f ) were calculated from the experimentally measured values of _n, , Young's modulus and density by using the strong-coupling theories. From the comparison of T _c with their calculated parameters, it was found that is the most dominant parameter for T _c. The GL parameter, , and the GL coherence length, _GL(0), were estimated to be 70 to 100 and about 7.6 nm, respectively, from the experimental values of and _n by using the GLAG theory and hence it is concluded that the present amorphous alloys are an extremely dirty type-II superconductor having a very weak flux pinning force.     

A temperature-variable sample rotating cryostat in high magnetic fields

A temperature-variable sample rotating cryostat has been developed in order to measure the angular and temperature dependence of the upper critical field in several single crystal Chevrel phase superconductors. In the cryostat, the temperature of the sample can be varied from 2 to 15 K within an accuracy of ±10 mK. The sample can be rotated in an adiabatic vacuum can around a horizontal axis at the centre of our superconducting magnets up to 16.5 T within an accuracy of ±1°.     

Crystallization characteristics of an amorphous Nb81Si19 alloy under high pressure and formation of the A15 phase

Amorphous Nb-19 at% Si alloy, prepared by rapid quenching from the molten state, was annealed while being subjected to a pressure of 10 GPA. X-ray diffraction investigations on the alloy specimens quenched to ambient conditions have shown that pressure greatly alters the crystallization characteristics and the cubic A15 (Nb₃Si)-phase forms in preference to the tetragonal Nb₃Si-phase at temperatures in the range from 710° C to 800° C. Up to 680° C, the component atoms do not show any tendency towards ordering upon crystallization and the body-centred tetragonal solid solution forms; while, at 830° C, niobium atoms diffuse to form the body-centred cubic Nb precipitates. Superconducting properties have been measured for the single-phase A15 structure with the lattice parametera=0.5155 nm with the results that the transition temperature,T _C, is 3.4 K and the temperature coefficient of the upper critical field,H _C2, is 1.2 MA m^–1 K^–1 (15 kOe K^–1).     

A simple method for measuring the relative permittivity of printedcircuit board materials

This paper presents a simple method to measure the relative permittivity of glass-epoxy printed circuit boards (PCBs). In this method, the relative permittivity as a function of frequency is measured using an actual PCB. In order to estimate the relative permittivity, the reflection coefficient is measured with a network analyzer. The relative permittivity is calculated by observing the frequencies of the resonant cavity modes. We show that the relative permittivity of an FR-4 sample decreases from 4.3 to 4.2 at frequencies from 300 MHz to 2 GHz     

Solution copolymerization of ethylene with α-olefins by a MgCl2 supported TiCl4 catalyst

Summary Copolymerization of ethylene with -olefins, i.e. propylene, butene-1, 4-methyl-pentene-1(4-MP-1), was carried out by a MgCl₂ supported TiCl₄ catalyst in combination with Et₃Al at a temperature as high as 170 °C at which the polymerization system was homogeneous. This catalytic system showed very a high activity and produced copolymers having a density of 0.91–0.94 g/ml. Of these three kinds of comonomers, propylene showed the highest reactivity and caused most frequently the termination of a polymer growing by chain transfer reaction and produced copolymers having the broadest MWD.     

Carbohydrate metabolism of the aged. 3) Muscles-perfusion experiment using the rat hindquarter muscle and enzyme activities of the gastroenemius muscle

The simultaneous diffusion of 14C-succinylcholine and p-amino hippurate across human placental tissue in vitro was measured. Column chromatographic purification of the radioactivity followed by paper chromatographic analysis showed little alteration of the succinylcholine during the course of these experiments. Similar chloroform-buffer partition coefficients for the two solutes were measured. Thus in these experiments, the nearly identical transfer rates of these two similar sized, lipid-insoluble compounds indicated that succinylcholine crosses human placental tissue in quantitites compatible with its molecular size and lipophobic nature, and that the diffusion rate is not significantly influenced by its increased molecular charge.     

Studies on propylene polymerization with a highly active MgCl2 supported TiCl4 catalyst system

Summary Propylene polymerization was performed with a highly active MgCl supported TiCl₄ in conjunction with Et₃Al and ethyl benzoate (EB). The obtained polypropylene sample was separated into four fractions by successive extraction with pentane, heptane and trichloroethylene (trichlene). Yield, Mn, Tm and microtacticity of each fraction were determined, and the effects of the concentration of EB on these items of results were investigated. It has been found that EB enhances yield, Mn and stereospecificity of trichlene insoluble (the most stereospecific) fraction, and in contrast, it decreases rapidly yields of other three fractions without changing the character of the polymers. From these findings, the functions of EB to the active centers were discussed.     

Growth of bubbles containing plasma in water by high-frequency irradiation

Plasma was generated in water by irradiation at high frequency of 13.56 MHz, and the behavior of bubbles including the plasma was observed by a high-speed camera. The generation pattern of the bubbles was classified into four types according to liquid temperature and supplied power. Conducting the simulation, the maximum temperature in the bubble was found to be from 3500 K to 4300 K, and the decomposition of water molecule occurred. The gas in the bubble was found to become high ratio of hydrogen. The phenomenon can be regarded as a film boiling of exceptionally high heat flux.     

Thermodynamic study and intrinsic type II superconductivity in the A-15 compound V3Si

The specific heat of a single crystal of the A-15-type compound V₃Si in the normal, mixed, and superconducting states has been measured from 4 to 30 K in magnetic fields up to 50 kOe. The analysis has been performed in a self-consistent way based on the second-order phase transition from the normal to the superconducting state. The thermodynamic critical field and then various physical parameters characterizing the superconducting and normal states are almost consistently derived from the thermodynamics and the microscopic BCS-GLAG theory. It is confirmed that V₃Si is an intrinsic type II superconductor with a high intrinsic GL parameter ₀.This work was partially supported by a Grant in Aid for Scientific Research (B) from the Ministry of Education.