Does mixed venous desaturation during a bed bath indicate cardiopulmonary decompensation in postoperative cardiac patients?]

The bed bath procedure consists of cleansing patients' body, passive position change, changing gown and making a bed. During the procedure, mixed venous desaturation was observed consistently in postoperative cardiac patients. We investigated the cause of the phenomenon in 22 patients undergoing cardiac surgery in their first postoperative day. The patients were breathing oxygen-enriched air via a Venturi mask. Cardiac index (CI), transluminal SvO2, arterial blood gas, Hb, DO2, VO2, FIO2, A-aDO2 and Qp/Qs were measured before and during the bed bath, while the patients were in the supine and left lateral position, respectively. Mean 8.5 +/- 1.5 minutes were required to complete the bed bath. During the bed bath, SvO2 decreased from 71 +/- 7% to 59 +/- 9% (P < 0.001), and returned to the baseline 6.5 +/- 7.4 minutes after the completion of the bed bath. VO2 increased markedly from 128 +/- 27 to 194 +/- 47 ml.min-1.m-2 (P < 0.001), while DO2 increased slightly from 480 +/- 91 to 513 +/- 110 ml.min-1.m-2 (P < 0.05). Among the determinants of DO2, CI increased slightly from 3.3 +/- 0.6 to 3.6 +/- 0.8 l.min-1.m-2, Hb remained unchanged and SaO2 decreased from 98.5 +/- 0.8 to 98.0 +/- 1.1%. FIO2 also decreased, while A-aDO2 and Qp/Qs remained unchanged. There was a negative correlation between VO2 change and SvO2 change, but no correlation between DO2 change and SvO2 change. There was a positive correlation between SaO2 change and SvO2 change, as well as between FIO2 change and SaO2 change. Therefore, the major cause of mixed venous desaturation was not the decreased DO2 or cardiopulmonary decompensation but the increased VO2 due to increased activity of the skeletal muscles. However, the decrease in SaO2 due to markedly increased O2 demand and the limited increase in CI might partially contribute to the marked decline in SvO2 through the limited increase in DO2.     

Human-sized anthropomorphic robot hand with detachable mechanism at the wrist

In this paper, we proposed a human-sized multi-fingered robot hand with detachable mechanism at the wrist. The fingers are tendon-driven by wires and the actuators are embedded in the arm part. The driving forces from the arm part are transmitted to the hand part by a gear mechanism at the wrist. The gear mechanism makes the hand part and the arm part splittable. The detachable mechanism enables separate maintenance of the hand and arm parts. To avoid undesired joint mutual interferences due to the tendon-driven mechanism, a joint motion correction control is implemented in that counteracting motions are ordered to actuators. The correction coefficient can be calculated based on the mechanical configuration. The developed robot hand has the size of 200[mm](length) × 78[mm](width) × 24.6[mm](thickness) and can exert 10[N] at the fingertip. The performance of the developed robot hand was shown by a motion control experiment.     

Dietary exposure to acrylamide in a group of Japanese adults based on 24-hour duplicate diet samples

Acrylamide is a probable human carcinogen and known human neurotoxin that can be generated in food through heating. Using a mathematical modelling approach, our previous study estimated long-term average dietary exposure to acrylamide in the Japanese people; however, the validity of these estimates remained unknown. Here, we aimed to obtain a more accurate estimate of acrylamide exposure that would reflect the usual practice of heat processing and consumption of foods in the population. We collected duplicate diet samples and dietary records during 24 h from a group of Japanese adults. A total of 110 duplicate diet samples were analysed for acrylamide by LC-MS/MS. Data from individual dietary records were used to examine the association between dietary acrylamide exposure and consumption of selected food groups (e.g., coffee, tea, confectioneries, and vegetables prepared at high temperature [deep-frying, stir-frying, sautéing, and baking]). Of the 110 homogenised diet samples, 108 contained detectable levels of acrylamide. Dietary exposure to acrylamide ranged from 8 to 1582 ng/kg body weight (bw)/day, with the mean value of 215 ng/kg-bw/day and median value of 143 ng/kg-bw/day. This mean value was higher than the value we previously estimated for Japanese adults using a mathematical approach. Multiple linear regression analysis showed log dietary acrylamide exposure was significantly associated with consumption of coffee and vegetables prepared at high temperature during 24-hr of sampling (adj. R² = 0.250, p < 0.001). We revealed significant difference in dietary acrylamide exposure between participants who had coffee and vegetables prepared at high temperature (median, 169 ng/kg-bw/day; range, 35–1224 ng/kg-bw/day, n = 42) and those who had none of them (median, 75 ng/kg-bw/day; range, 8–311 ng/kg-bw/day, n = 15) (Steel-Dwass test, p < 0.05).     

Bending property and phase transformation of Ti–Ni–Cu alloy dental castings for orthodontic application

Bending property of Ti–Ni–Cu alloy castings was investigated in a three-point bending test for orthodontic application in relation to the phase transformation. The compositions of the alloys were Ti–50.8Ni and Ti–40.8Ni–10.0Cu (mol %), and four cross-sectional shapes of the specimens were selected. Heat treatment was performed at 713, 753 or 793 K for 1.8 ks. The bending load changed by the cross-sectional size and shape mainly because of the difference in the moment of inertia of area, but the load–deflection relation did not differ proportionally in the unloading process. The difference between the load values in the loading and the unloading processes was relatively small for Ti–Ni–Cu alloy. With respect to the residual deflection, there was no significant difference between Ti–Ni and Ti–Ni–Cu alloys with the same treatment condition. The load values in the loading and the unloading processes decreased by each heat treatment for Ti–Ni alloy; however, the decrease in the load values for Ti–Ni–Cu alloy was not distinct. It is proved that Ti–Ni–Cu alloy castings produce effective orthodontic force as well as stable low residual deflection, which is likely to be caused by the high and sharp thermal peaks during phase transformation.     

Techniques for flexible image/video resolution conversion with heterogeneous terminals

Multimedia capturing and display devices of different resolutions and aspect ratios can be easily connected by networks and, thus, there is a great need to develop techniques that facilitate flexible image/video format conversion and content adaptation among these heterogeneous terminals. Quality degradation due to downsampling, up-sampling, coding/decoding, and some content adaptation mechanism (say, image mosaicking) in the transmission process is inevitable. It is desirable that multimedia contents can be easily captured, displayed, and seamlessly composed. Challenges and techniques to achieve this goal are reviewed first. Then, two specific topics, i.e., image/video mosaicking and super resolution (SR) conversion, are highlighted. As compared with previous work developed for these problems, the challenge under the current context is to strike a balance between low computational complexity and high quality of resultant image/video. Several new developments along this line are discussed     

Synthesis of 4‐Aryl‐2‐Quinolones via Copper‐Catalyzed Hydroarylation of (o‐Aminophenyl)propiolates with Arylboronates

4‐Aryl‐2(1H)‐quinolones were efficiently synthesized via copper‐catalyzed hydroarylation of (o‐aminophenyl)propiolates with arylboronic acid neopentyl glycol esters. The substrate propiolates were prepared from the corresponding silylalkynes with carbon dioxide by Kondo’s carboxylation method using N,N‐dimethylformamide as a solvent. Hydroarylation was performed in the presence of 3 mol% copper(II) acetate in methanol at 28 °C for 12 h and subsequent deprotection using trifluoromethanesulfonic acid (3.0 equiv.) at 65 °C for 2 h in the same pot to afford the desired 4‐aryl‐2(1H)‐quinolones in 39–89% yields.

     

Clinical application of single-shot echo-planar diffusion-weighted imaging with compressed SENSE in prostate MRI at 3T: preliminary experience

Magnetic Resonance Materials in Physics, Biology and Medicine - Image quality (IQ) of diffusion-weighted imaging (DWI) with single-shot echo-planar imaging (ssEPI) suffers from low signal-to-noise...     

Recent development in NRD-guide technology

Recent achievements in the field of the NRD-guide integrated circuits and antennas are reviewed. The main emphasis is placed on a new class of planar antennas which employ a leaky NRD-guide as the feed medium and can be contained in a common housing together with the NRD-guide integrated circuits.     

Pressure Rise and Propagation Phenomena Due to Fault Arc in Container with Opened Pipe

This paper describes experimental and analytic studies on pressure rise and propagation phenomena due to high current arcs in a container with opened pipes. The shape of the experimental container was chosen taking into account underground common ducts. First, arcs were ignited in the container with varying diameter D and length L of the opened pipes and at arc currents of 4 kA to 12.5 kA and an arc duration of 0.1 s. Based on measured waveforms, the maximum pressure rise and the pressure oscillation frequency were obtained. It was found that there is a tendency for to increase with decreasing D and increasing L, and that D has a much greater impact on . In addition, the tendencies of with changing D and L can be approximately explained by Helmholtz resonance. Second, a CFD model for the container with opened pipe was developed based on the experimental results, and simulations were performed. The simulation results were found to correspond to the experimental pressure rise.