Insight into adsorption mechanism of cationic dye onto agricultural residues-derived hydrochars: Negligible role of <Emphasis Type="Italic">π-π</Emphasis> interaction

Hydrochars derived from golden shower pod (GSH), coconut shell (CCH), and orange peel (OPH) were synthesized and applied to remove methylene green (MG5). The results indicated that the hydrochars possessed low specific surface areas (6.65-14.7m²/g), but abundant oxygen functionalities (1.69-2.12mmol/g). The hydrochars exhibited cellular and spherical morphologies. Adsorption was strongly dependent on the solution pH (2-10) and ionic strength (0-0.5M NaCl). Equilibrium can be quickly established in the kinetic study (60-120 min). The maximum Langmuir adsorption capacities at 30 °C followed the order GSH (59.6mg/g)>CCH (32.7mg/g)>OPH (15.6mg/g)> commercial glucose-prepared hydrochar (12.6mg/g). The dye adsorption efficiency was determined by the concentrations of oxygen-containing functionalities on the hydrochar surface. The adsorption process occurred spontaneously (? ΔG^o) and exothermically (?ΔH^o). Desorption studies confirmed the reversible adsorption process. Oxygenation of the hydrochar surface through a hydrothermal process with acrylic acid contributed to increasing MG5 adsorption and identifying the negligible role of π-π interaction to the adsorption process. The analysis of Fourier transform infrared spectrometry demonstrated that the aromatic C=C peak did not significantly decrease in intensity or shift toward higher/lower wavenumbers after adsorption, which further confirms the insignificant contribution of π-π interaction. Electrostatic attraction played a major role in adsorption mechanisms, while minor contributions were accounted for hydrogen bonding and n-π interactions. The primary adsorption mechanisms of MG5 onto hydrochar were similar to biosorbent, but dissimilar to biochar and activated carbon (i.e., π-π interaction and pore filling).     

Molecularly Targeted Agents as Radiosensitizers in Cancer Therapy—Focus on Prostate Cancer

As our understanding of the molecular pathways driving tumorigenesis improves and more druggable targets are identified, we have witnessed a concomitant increase in the development and production of novel molecularly targeted agents. Radiotherapy is commonly used in the treatment of various malignancies with a prominent role in the care of prostate cancer patients, and efforts to improve the therapeutic ratio of radiation by technologic and pharmacologic means have led to important advances in cancer care. One promising approach is to combine molecularly targeted systemic agents with radiotherapy to improve tumor response rates and likelihood of durable control. This review first explores the limitations of preclinical studies as well as barriers to successful implementation of clinical trials with radiosensitizers. Special considerations related to and recommendations for the design of preclinical studies and clinical trials involving molecularly targeted agents combined with radiotherapy are provided. We then apply these concepts by reviewing a representative set of targeted therapies that show promise as radiosensitizers in the treatment of prostate cancer.     

Diffusion coefficient of carbon in Fe–Ni alloy during synthesis of diamond under high temperature and high pressure

Synthetic diamond particles were prepared under high temperature and high pressure using arrayed seeds. A dense Fe–Ni alloy shell covered each diamond seed during synthesis; the growth of diamond particles was controlled by the diffusion of carbon through the metallic shell. The diffusion coefficient of carbon through Fe–Ni melt at 1600 K and 5.5 GPa is about 5×10^?6 cm²/s, with an activation energy for diffusion of 336 kJ/mol.     

Highly sensitive electrochemical sensor based on zirconium oxide-decorated gold nanoflakes nanocomposite 2,4-dichlorophenol detection

Journal of Applied Electrochemistry - In this study, a sensitive and selective electrochemical sensor based on a zirconia oxide-decorated gold nanoflake nanocomposite-modified glassy carbon...     

In situ synthesis of zinc oxide/selenium composite for UV blocker application

Development of reliable ultraviolet (UV) blockers is crucial for UV radiation protection applications such as sunscreen and UV-resistant fabric. To date, zinc oxide (ZnO) has been extensively used as a physical UV blocker worldwide but has also been criticized for with its unfavored UV-induced reactive oxygen species (ROS) generation phenomena. As an attempt to suppress the photocatalytic activity of ZnO without compromising its UV absorbance property, amorphous selenium (Se) nanoparticles (NPs) were incorporated to ZnO using a facile and cost-effective coprecipitation method. Additionally, this process also enables an economical synthesis route for harvesting amorphous Se NPs from an aqueous medium. The ZnO–Se composites were thoroughly characterized to confirm its enhanced UV absorptivity combined with high transparency in the visible light range and to understand the interaction between ZnO and Se. Besides, Se-induced photocatalytic activity suppression of ZnO was demonstrated using methylene orange as an indicator. In vitro study revealed that ZnO–Se composite had improved biocompatibility over ZnO but comparable bacteriostasis ability under full-spectrum light irradiation. These results suggest that ZnO–Se composite is a promising UV blocker with advantages of facile synthesis, UV-induced ROS generation diminishment and biocompatibility.     

Natural Palm Olein Polyol as a Replacement for Polyether Polyols in Viscoelastic Polyurethane Foam

The impact of replacing three polyether polyols with different levels of a single palm olein‐based natural oil polyol (NOP) was systematically correlated with the changes in foaming reactivity, cell structure, physico‐mechanical properties, and morphology of viscoelastic (VE) foams. The data show that replacing the polyether polyols with the NOP slightly increased the rate of the foaming reactivity. Increasing the NOP content resulted in increased cell size and cells remained fully open. Increased NOP content contributed to higher load bearing properties of VE foam, which can be attributed to higher functionality of NOP compared to polyether polyols. Addition of the NOP slightly increased the resilience of the foams, however, the hysteresis which is the measure of energy absorption remained mostly unaffected. Age properties, characterized by dry and humid compression sets, were mostly unaffected by the replacement of the polyether polyol with the NOP. The addition of NOP did not impact the morphology of the VE foam polymer matrix, which appears to retain a low degree of hard and soft segment domain separation. Overall, the results demonstrate a feasibility that the NOP can be used to partially replace the polyether polyols in VE polyurethane foams without significant impact on the functional performance.     

Urethane‐forming reaction kinetics and catalysis of model palm olein polyols: Quantified impact of primary and secondary hydroxyls

Model palm olein natural oil polyols (NOPs) with varying ratios of primary to secondary hydroxyls were synthesized, characterized, and evaluated in reaction kinetics study with isocyanate in formation of polyurethanes. Reaction rate constants and activation energies associated with primary and secondary hydroxyls of NOPs were quantified. The kinetic study in toluene shows that the NOP containing primary hydroxyls have three times higher reaction rate constants in noncatalyzed reaction with 4,4′‐diphenylmethane diisocyanate (4,4′‐MDI) compared to the model NOP containing only secondary hydroxyls, which is associated with higher activation energy of secondary hydroxyls. However, the difference in reaction rate constants of primary and secondary hydroxyls in NOPs diminished in the reactions catalyzed with dibutyltin dilaurate. Bulk polymerization reaction confirms the kinetics results in toluene, showing that the model NOP containing primary hydroxyls reached gel time at a faster rate. Evaluation of elastomers from bulk polymerization shows low degree of phase separation of hard and soft segments for elastomers based on the model NOPs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42955.