Preparation of Gadolina Stabilized Bismuth Oxide Doped with Boron via Electrospinning Technique

In this study, boron doped and undoped poly (vinyl) alcohol/bismuth–gadolina acetate (PVA/Bi–Gd) nanofibers were prepared using electrospinning technique then calcinated at 800 °C for 2 h. The originality of this study is the addition of boron to metal acetates. The effects of boron doping were investigated in terms of solution properties, morphological changes and thermal characteristics. The characteristics of the fibers were investigated with FT-IR, XRD, SEM and BET. The addition of boron did not only increase the thermal stability of the fibers, but also their diameters, which yielded stronger fibers. XRD analyses showed that boron doping increased the peak intensities and indicated that the boron doping enhanced the crystallite size. Moreover, no shifts were noticed in diffraction angles for boron doped and undoped samples. Therefore, boron doping did not significantly alter the lattice spacing. The SEM micrograph of the fibers showed that the addition of boron resulted in the formation of cross-linked bright-surfaced fibers. The average fiber diameter for boron doped and undoped fiber mats were 204 and 123 nm, respectively. Also, grain diameters of boron doped and undoped nanocrystalline sintered powders were measured as 140 and 118 nm, respectively. The BET results showed that boron undoped and doped Bi₂O₃–La₂O₃ nanocrystalline powder ceramic structures sintered at 800 °C have surface areas of 59.72 and 39.80 m²/g, respectively.     

IT support services for telecommuting workforce

Organizations are in the process of moving to a network-based operating structure. Telecommuting is just a corollary of this push. While new information technologies allow for a highly mobile work force that can work from remote locations across the world, this begs the question how does supporting this new telecommuting workforce differ from supporting employees in a regular office. The purpose of this study is to describe how telecommuting and a telecommuter differ from in situ working and the desk-bound worker and how this difference dictates different approaches to providing various services such as IT support services for telecommuters. Our goal is to provide a framework to assist IT managers in addressing issues of how to support telecommuting employees to maximize their potential benefits.     

CPFD flow pattern simulation in downer reactors

This study contributes with a computational fluid dynamic simulation based on the numerical solution of continuity and momentum balance equations in a three‐dimensional (3‐D) framework. The proposed down flow gas–solid suspension model includes a unit configuration and C_D drag coefficients recommended for these units. Computational particle fluid dynamics (CPFD) calculations using suitable boundary conditions and a Barracuda (version: 14.5.2) software allow predicting local solid densification and asymmetric “wavy flows.” In addition, this model forecasts for the conditions of this study higher particle velocity than gas velocity, once the flow reaches 1 m from the gas injector. These findings are accompanied with observations about the intrinsic rotational character of the flow. CPFD numerical 3‐D calculations show that both gas and particle velocities involve the following: (a) an axial velocity component, (b) a radial velocity component (about 5% of axial velocity component), and (c) an angular velocity component. The calculated velocity components and the rotational flow pattern are established for a wide range of solid flux/gas flux ratios. © 2012 American Institute of Chemical Engineers AIChE J, 59: 1635–1647, 2013     

A comparative study on structural,morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Journal of Materials Science: Materials in Electronics - In this study, zinc oxide (ZnO) nanowires (NWs) were successfully produced on Zn plates through electrochemical anodization in potassium...     

Getting a Grip on the Undrugged: Targeting β-Catenin with Fragment-Based Methods

Aberrant WNT pathway activation, leading to nuclear accumulation of β-catenin, is a key oncogenic driver event. Mutations in the tumor suppressor gene APC lead to impaired proteasomal degradation of β-catenin and subsequent nuclear translocation. Restoring cellular degradation of β-catenin represents a potential therapeutic strategy. Here, we report the fragment-based discovery of a small molecule binder to β-catenin, including the structural elucidation of the binding mode by X-ray crystallography. The difficulty in drugging β-catenin was confirmed as the primary screening campaigns identified only few and very weak hits. Iterative virtual and NMR screening techniques were required to discover a compound with sufficient potency to be able to obtain an X-ray co-crystal structure. The binding site is located between armadillo repeats two and three, adjacent to the BCL9 and TCF4 binding sites. Genetic studies show that it is unlikely to be useful for the development of protein–protein interaction inhibitors but structural information and established assays provide a solid basis for a prospective optimization towards β-catenin proteolysis targeting chimeras (PROTACs) as alternative modality.     

Designing maintainable, reusable interfaces

A conceptual framework, the Interaction Management Network (IMN), that captures the essential structure of any interface from task-oriented specification to object-oriented implementation is presented. IMN is essentially a task-oriented specification scheme based on a semantic network. For each element, as well as for the complete network, there is a direct representation suitable for object-oriented implementation. By capturing task relationships in the interface specification and explicitly representing constraints, designers can create interfaces that meet the often elusive user requirements. The application of IMN to creating an interface system for laying out floors is described     

Comparative clinical and angiographic analysis of the initial efficacy and long-term follow-up of Wiktor stent implantation with conventional balloon angioplasty

This study was retrospectively designed to examine if the Wiktor stent, a balloon-expandable tantalum coil stent, provides a more favorable procedural and long-term clinical and angiographic outcome than does conventional coronary balloon angioplasty (POBA). From April 1995 to April 1996, we implanted 56 Wiktor stents in 46 lesions (LAD: 23, RCA: 16, CX: 7) in 42 patients (average age 53 +/- 10 years). Coronary lesions from the stent group were matched with similar lesions of another 42 POBA patients whose characteristics were identical to the Wiktor group. Revascularization indications in the Wiktor and POBA groups, respectively, were recent myocardial infarction (RMI) (45%, 40%), unstable (31%, 39%) and stable (24%, 21%) angina pectoris. 7% of the stents and 17% of the POBA balloons were less than 3 mm in diameter (p > 0.05). Procedural success was significantly greater in the Wiktor group than in the POBA group (100% vs. 92%, p < 0.05). Neither major cardiac event (death, CABG, acute myocardial infarction) nor (sub)acute occlusion was encountered in the Wiktor group during the hospitalization period and 1 month follow-up. There was 1 urgent CABG and 4 subacute occlusions in the POBA group. Control angiography at 8 months was performed in patients of both groups, of whom some were symptomatic at long-term follow-up or completely event free for 8 months. Angiographic restenosis (> 50% diameter stenosis) occurred in 25% of the Wiktor patients and in 43% of those in the POBA group (p < 0.05). For an 18 month clinical follow-up, 91% of the patients in the Wiktor group were asymptomatic and without ischemia in radionuclide imaging (RI), whereas 79% of the POBA patients were angina-free and 74% were without ischemia in the RI study. In conclusion, Wiktor stent implantation, with no major cardiac event or subacute occlusion, provides a more favorable procedural and long-term clinical and angiographic outcome than does conventional POBA.     

The electrochemical synthesis of poly(aniline-co-o-anisidine) on copper and their corrosion performances

The copolymer films PANI-co-POA and poly(aniline-co-o-anisidine) were carried out on copper (Cu) electrode, by applying two different scan rates (20 and 50 mV s⁻¹) and using two different thicknesses at high scan rate. Synthesizes were achieved under cyclic voltammetric conditions from 0.075 M aniline and 0.075 M o-anisidine containing sodium oxalate solutions. The synthesized copolymer films were strongly adherent and homogeneous in both cases. AC impedance spectroscopy (EIS), anodic polarization plots and open circuit potential–time curves were used to evaluate the corrosion performance of copolymer coated and uncoated electrodes in 3.5% NaCl. It was shown that the copolymer film coated at low scan rate exhibited a better property initially when compared with the copolymer film produced at high scan rate. However, it could not resist the attack of corrosion products, in longer time and meanwhile its barrier property significantly diminished. It was found that the thin copolymer film produced at high scan rate by its catalysing effect led to the formation of highly protective copper oxides on the surface whereby providing a better protection for long exposure times. It also emerged that the corrosion resistances of thin copolymer film produced at high scan rate and copolymer film synthesized at low scan rate were almost same and relatively higher for much longer periods when compared with the one observed for bare copper electrode.     

A study of the Taguchi optimization method for surface roughness in finish milling of mold surfaces

The objective of this paper is to develop a Taguchi optimization method for low surface roughness in terms of process parameters when milling the mold surfaces of 7075-T6 aluminum material. Considering the process parameters of feed, cutting speed, axial-radial depth of cut, and machining tolerance, a series of milling experiments were performed to measure the roughness data. A regression analysis was applied to determine the fitness of data used in the Taguchi optimization method using milling experiments based on a full factorial design. Taguchi orthogonal arrays, signal-to-noise (S/N) ratio, and analysis of variance (ANOVA) are used to find the optimal levels and the effect of the process parameters on surface roughness. A confirmation experiment with the optimal levels of process parameters was carried out in order to demonstrate the effectiveness of the Taguchi method. It can be concluded that Taguchi method is very suitable in solving the surface quality problem of mold surfaces.     

Effects of Polymerization and Briquetting Parameters on the Tensile Strength of Briquettes formed from Coal Coke and Aniline-Formaldehyde Resin

In this work, the utilization of aniline (C₆H₇N) formaldehyde (HCHO) resins as a binding agent of coke briquetting was investigated. Aniline (AN) formaldehyde (F) resins are a family of thermoplastics synthesized by condensing AN and F in an acid solution exhibiting high dielectric strength. The tensile strength sharply increases as the ratio of F to AN from 0.5 to 1.6, and it reaches the highest values between 1.6 and 2.2 F/AN ratio; it then slightly decreases. The highest tensile strength of F-AN resin-coke briquette (23.66 MN/m²) was obtained from the run with 1.5 of F/AN ratio by using (NH₄)₂S₂O₈ catalyst at 310 K briquetting temperature. The tensile strength of F-AN resin-coke briquette slightly decreased with increasing the catalyst percent to 0.10%, and then it sharply decreased to zero with increasing the catalyst percent to 0.2%. In general, the tensile strength of F-AN resin-coke briquette increased as increased the briquetting temperature in these tests contras with NaOH catalytic runs. The effect of pH on the tensile strength is irregular. As the pH of the mixture increases from 9.0 to 9.2, the tensile strength shows a sharp increase, and the curve reaches a plateau value between pH 9.3 and 9.9; then the tensile strength shows a slight increase after pH = 9.9.