Fast computation and stable convergence technique for unbalanced load flow calculation in large‐scale systems

This paper presents a new method of unbalanced load flow calculation to improve complexity by the method of advanced symmetrical coordinates. Usually, the electric power system has been calculated only by the positive phase sequence component on the assumption that three‐phase transmission lines and loads are balanced. However, many ultrahigh‐voltage transmission lines are not transposed, and therefore mutual inductances cause negative sequence currents in the trunk transmission system. Negative sequence currents cause heating of generators and transformers, and therefore the three‐phase sequence component should be calculated accurately. We examined the fast computation and good convergence performance of unbalanced load flow calculation by models of three‐phase transmission lines, transformers, and loads. The proposed method is not the phase coordinate system but the method of symmetrical coordinates. This technique decreases numerical complexity by the use of a simplified Jacobian matrix. The convergence performance of this method is inferior to that of the usual Newton–Raphson method. As a consequence, the problem of poor convergence performance is alleviated by a technique for the newly developed deceleration Newton method. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(1): 17–24, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21034     

Architecture of colloidal crystals constructed by silica hybrid nanoparticles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter D_n = 192 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brushes encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization (ATRP) approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. We constructed the colloidal crystals using these photofunctional particles. Moreover, the SiO₂ particle array of colloidal crystals was locked by radical photopolymerization with vinyl monomer as a matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Kinetics of property change associated with atmospheric humidity changes in alumina powder granules with PVA binder

A microcompression testing machine was used on single Al₂O₃ powder granules to study their stress–strain behavior as a function of relative humidity. The test granules were prepared by spray-drying slurries containing 3 mass% poly(vinyl alcohol) and Al₂O₃ powder. The stress–strain curves and granule strength were determined at regular time intervals, after step changes in atmospheric humidity. When stress was applied, deformation increased rapidly with the stress. This stress corresponded to the fracture strength of the granule. In a dry atmosphere, the granules deformed linearly with increasing stress, and a rapid change in strain was noted above a certain critical value of increased stress. In a wet atmosphere, the granules deformed continuously at lower stress. The mechanical properties of the granules changed rapidly with time when the atmospheric relative humidity was changed. Within 3 min of exposure to a new atmosphere, the mechanical properties of the granules reached equilibrium values. The change in properties with humidity was controlled by moisture diffusion in the granules and was reversible.     

Evaluation Method for Flow Accelerated Corrosion of Components by Corrosion Analysis Coupled with Flow Dynamics Analysis

The troubles of major components and structural materials in nuclear power plants have often been caused by flow-induced vibration, corrosion, and their overlapping effects. In order to establish safe and reliable plant operation, it is required to forecast future troubles based on combined analyses of flow dynamics and corrosion and prevent them at very early stages. Corrosion analysis models have been combined with three-dimensional flow dynamics and heat transfer analysis models to evaluate corrosion damage (e.g., stress corrosion cracking [SCC] and flow-accelerated corrosion [FAC]) of major components and structural materials.

The models are divided into the following two parts. First is a prediction model of future trouble on materials. The distribution of oxidant concentrations along the flow path are obtained by solving water radiolysis reactions in the boiling water reactor primary cooling water and hydrazine and oxygen reactions in pressurized water reactor secondary cooling water. Then, the distribution of electrochemical corrosion potential (ECP) along the flow path is obtained by oxidant concentration based on a mixed potential model. Higher ECP enhances the possibility of SCC, while lower ECP accelerates FAC. Second is an evaluation model of wall thinning caused by FAC. At the location with a higher possibility for FAC occurrence, a trend of wall thinning is evaluated, and the lifetime is estimated for preventive maintenance.     

Pancreatic duct patency after pancreaticogastrostomy: long-term follow-up study

BACKGROUND/AIMS: To clarify whether the pancreatic duct remains patent during long-term follow-up of patients after pancreaticogastrostomy. In a previous study of pancreaticogastrostomy with post-operative follow up for 3 years after surgery, we found that the orifice of the pancreatic duct was difficult to detect in some patients because of swelling of the gastric mucosa. Previous studies have not examined pancreatic duct patency during long-term follow-up. METHODOLOGY: Between July 1985 and August 1989, 20 patients underwent a pylorus-preserving pancreaticoduodenectomy with reconstruction by pancreaticogastrostomy. Five of these patients were followed up post-operatively for more than 9 years to determine the patency of the pancreatic duct. All pancreatic anastomoses were performed by the telescopic method. RESULTS: All 5 patients were female, with a mean age of 65.4 years (range: 54-75). Median post-operative follow-up was 10.8 years (range: 9-12). The indications for surgery were carcinoma of the ampulla of Vater in 4 patients and chronic pancreatitis in 1 patient. Pancreatic duct patency was confirmed in 4 patients by gastroscopy and pancreatography. However, the anastomotic orifice could not be detected in the remaining patient because of complete coverage by the gastric mucosa. In this patient, pancreatic exocrine and endocrine function deteriorated with dilation of the distal pancreatic duct. The patient underwent a second operation involving dissociation of the pancreatico-gastric anastomosis and resection of about 1 cm of the fibrous, proximal portion of the pancreas. Reconstruction was performed with a Roux-en-Y pancreaticojejunostomy and a mucosa-to-mucosa anastomosis. CONCLUSIONS: Although pancreaticogastrostomy has been applied as a safe and straightforward method for reconstruction after pancreaticoduodenectomy, anastomotic stenosis is a potential late complication of this approach.     

Antithrombin III prevents blood pressure elevation and proteinuria induced by high salt intake in pregnant stroke-prone spontaneously hypertensive rats

In pregnant stroke-prone spontaneously hypertensive rats, salt-loading causes symptoms similar to those of human preeclampsia, such as hypertension and proteinuria. To seek evidence of the therapeutic potential in preeclampsia of antithrombin III (AT III), which is a serine protease inhibitor active on various enzymes of the coagulation cascade, we examined the effect of consecutive treatment with AT III on hypertension and proteinuria in this animal model. Salt-loading (2% NaCl diet) caused a significant elevation of systolic blood pressure on day 15-17 and of urinary protein excretion on day 17-19 of gestation, as compared with animals fed a normal diet. AT III, administered i.v. at a dose of 60 or 300 U/kg/d for 10 d from day 9-11 to 18-20, attenuated these pathological changes in a dose-dependent manner. Histological examination of the kidney revealed that AT III prevented the occurrence of arteriosclerosis and thickening of the capillary basement membrane. However, the pathological changes induced by salt-loading were not attributable to activation of the blood coagulation system. These results demonstrate that AT III has preventive action against salt-induced hypertension and proteinuria in pregnancy through a mechanism largely independent of its anticoagulant action. AT III may thus be beneficial for the treatment of clinical symptoms of preeclampsia.     

Transmission of human T-cell leukemia virus type 1 to mice

Human T-cell leukemia virus type 1 (HTLV-1) is associated with adult T-cell leukemia/lymphoma, HTLV-1-associated myelopathy/tropical spastic paraparesis, and other diseases. For prevention of the transmission of HTLV-1 and manifestation of these diseases, a small-animal model, especially a mouse model, would be useful. We injected HTLV-1-producing T cells (MT-2) intraperitoneally into neonatal C3H/HeJ mice. While the antibody against HTLV-1 antigens was not detectable in C3H/HeJ mice, HTLV-1 provirus was frequently detected in the spleen, lymph nodes, and thymus by PCR. HTLV-1 provirus was present at the level of 0 to 30 molecules in 10(5) spleen cells at the age of 15 weeks. In addition, a 59-bp flanking sequence of the HTLV-1 integration site was amplified from the spleen DNA by linker-mediated PCR and was confirmed to be derived from the mouse genome. HTLV-1 provirus was found in the T-cell fraction of the mouse spleen. These results indicate that mice can be infected by HTLV-1 and could serve as an animal model for the study of HTLV-1 infection and its pathogenesis in vivo.     

1.3 μm InGaAs/GaAs strained quantum well lasers with InGaPcladding layer

Using MOVPE, we fabricated strained quantum well 1.3 μm lasers with an InGaP cladding layer on a GaAs substrate. The lasers had a high gain coefficient of 60 cm^-1. Lasers with high reflection facets had a low threshold current density of 500 A/cm², and a high characteristic temperature of 100 K