Development and implementation of a hybrid intelligent controller for interior permanent-magnet synchronous motor drives

A hybrid neuro-fuzzy scheme for online tuning of a genetic-based proportional-integral (PI) controller for an interior permanent-magnet synchronous motor (IPMSM) drive is presented in this paper. The proposed controller is developed for accurate speed control of the IPMSM drive under various system disturbances. In this work, initially different operating conditions are obtained based on motor dynamics incorporating uncertainties. At each operating condition a genetic algorithm is used to optimize the PI controller parameters in a closed-loop vector control scheme. In the optimization procedure a performance index is developed to reflect the minimum speed deviation, minimum settling time and zero steady-state error. A fuzzy basis function network (FBFN) is utilized for online tuning of the PI controller parameters to ensure optimum drive performance under different disturbances. The proposed FBFN-based PI controller provides a natural framework for combining numerical and linguistic information in a uniform fashion. The proposed controller is successfully implemented in real time using a digital signal processor board DS 1102 for a laboratory 1-hp IPMSM. The effectiveness of the proposed controller is verified by simulation as well as experimental results at different dynamic operating conditions. The proposed controller is found to be robust for applications in an IPMSM drive.     

Microbial fuel cells for bioelectricity generation through reduction of hexavalent chromium in wastewater: A review

The study proposes the use of microbial fuel cell (MFC) technology to reduce toxic Cr(VI) present in industrial wastewater to less toxic trivalent chromium [Cr(III)], while generating electricity through a bioelectrochemical oxidation-reduction process. Factors influencing the treatment process and electricity generation include the concentration of Cr(VI) in wastewater, substrate types used for anodes, types of microorganisms involved, types of cathode and anode, surface area of the cathode and anode, and pH and temperature of cathodic and anodic solutions. While other heavy metals in wastewater may be removed by MFC technology, Cr(VI) removal is more efficient in terms of electricity generation. Previous research indicated that the maximum electrical power generated by Cr(VI) removal through the use of MFCs is 1600 mW/m², which is expected to increase as the factors affecting this process are optimized. Based on current data, MFC-based electricity generation along with Cr(VI) removal is a potential future source of sustainable energy. However, research priorities need to focus on reducing the cost of MFC technology by using economical and effective materials and increasing electricity production.     

High dielectric permittivity and percolative behavior of polyvinyl alcohol/potassium dihydrogen phosphate composites

A new kind of anhydrous, transparent, and flexible potassium dihydrogen phosphate (KH₂PO₄ or KDP)/polyvinyl alcohol (PVA) composite in the form of film (0.10 mm) has been prepared by solution casting technique. KDP is well dispersed in the polymer matrix as observed from the microstructural studies. Frequency and temperature dependent dielectric properties of the composites have been studied with varying KDP concentrations. The PVA/KDP composite films exhibited extraordinarily high relative permittivity ε′ ∼ 430 (80 times higher compared with pure PVA and even higher than KDP) near the percolation threshold (ϕ_C = 2.5 wt % KDP) with low dielectric losses (∼ 0.15) at 1 kHz and room temperature. Such flexible, low loss and high dielectric permittivity material has enormous importance for application in devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Improved quadtree image segmentation approach to region information

Images are full of information and most often, little information is desired for subsequent processing. Hence, region of interest has key importance in image processing. Quadtree image segmentation has been widely used in many image processing applications to locate the region of interest for further processing. There are also variable block-size image coding techniques to effectively reduce the number of transmitted parts. This paper presents quadtree partition technique as a pre-processing step in image processing to determine what part should be more heterogeneous than the others. It also introduces an idea to solve the problem of squared images. Finally, proposed approach is implemented and analysed. The simulation of the Matlab code of the quadtree is represented by all algorithms and the figures. Thus, achieved results are promising in the state of the art.     

Assessment of organic acid-rich bio-sap to generate electricity

The study has focused on electricity generation from organic acid-rich bio-substrate like star fruit (Averrhoa carambola). The sap of star fruit was selected as an electrolyte due to the presence of significant amounts of organic acids such as citric acid and ascorbic acid. To preserve the sap, 2% phenol by volume was used to reduce the growth of microorganisms, and the addition of phenol did not affect the initial pH. It was observed that due to an increase in the electrode surface area, reaction rate and current generation had been amplified. Internal resistance also decreased rapidly because of the large electrode surface area. Furthermore, internal resistance was the significant barrier in electricity generation, which was also successfully controlled by the baffle flow agitation system. Moreover, the baffle flow agitation system reduces the formation of dead zones and increases the total dissolved solids inside the electrochemical cell compartments during operation.     

Effects of plasma parameters on increasing the purity of nitrogen atom encapsulated fullerene in an RF plasma

Relatively high purity of nitrogen atom encapsulated fullerene (N@C₆₀) has been synthesized by an electron beam superimposed radio frequency (RF) discharge plasma method. Nitrogen species are characterized by an optical emission spectroscopy (OES); and a relationship between optical emission spectra and the purity of N@C₆₀ has been examined. It is observed that the increased amount of nitrogen molecule ions impinging on the sublimated fullerenes enhance the synthesis of N@C₆₀. Here, it is cleared that the efficient synthesis of N@C₆₀ is possible by controlling the parameters of electron beam superimposed RF plasma. As a consequence, comparatively high purity of about 0.08% of N@C₆₀ has been obtained.