Detailed Molecular Structure Modeling – A Path Forward to Designing Application Properties of ldPE

Summary: This paper describes a step on the ambitious aim to “design” application properties of ldPE by first simulating the detailed molecular structure of a high‐pressure tubular reactor product. The reactor of a certain configuration produces under well‐defined operating conditions. The next step is to correlate the structure with the application properties. Finally, the sequence will be reversed in order to deduce the operating conditions, which lead to the desired product quality. Two‐dimensional distributions, in molecular weight and branching frequency, as well a two compartment models with a core and a shell stream were simulated and compared with experimental results. Therefore, CFD simulations were carried out to discretize the reaction medium. Samples were taken from both pilot and commercial plants. The TREF‐SEC analytical method was successfully applied in order to measure the microscopic structure of the material. The tremendous numerical problems were solved with the help of the software PREDICI .

Detailed MWD for a pilot scale reactor product.     

Iron(II)‐based catalysts for ethene oligomerization

The synthesis of iron(II) complexes with various tridentate di(imino)pyridine ligands and their potential as ethene oligomerization catalysts are described. The ligands are characterized by ¹H‐ and ¹³C‐NMR spectroscopy and the complexes only by mass spectrometry due to their paramagnetism. After activation either with methylalumoxane (MAO) or with a heterogeneous cocatalyst consisting of partially hydrolyzed trimethylaluminum and silica gel, the prepared complexes proved to be good catalysts for the oligomerization of ethene. 1‐Octene, 1‐hexene, and 1‐decene were the major products, formed in very high isomeric purity (99.9 %). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 476–482, 2003     

Photocrosslinking of stilbene-modified polymers

The reactions of trans-2,5-dimethoxy-4′-aminostilbene with poly(maleic anhydride-co-methylvinyl ether) and trans-2,5-dimethoxy-4′-isocyanatostilbene with poly(oxy-1,4-phenyleneisopropylidene:1,4-phenyleneoxy-2-hydroxytrimethylene) yield polymeric systems which undergo rapid crosslinking upon short exposure to ultraviolet light. The extent of photocrosslinking as a function of exposure time was determined by the decrease of the trans-stilbene ultraviolet absorption at 350 nm.     

Piezo- and pyroelectricity in polymer blends of poly(vinylidene fluoride)/poly(methyl methacrylate)

Compatible polymer blends of poly(vinylidene fluoride) (PVDF) and poly(methyl methacrylate) (PMMA) can be used as suitable model systems for investigating the relationship between the physico-chemical structure of polymers and their piezo- and pyroelectric activity. The structure of PVDF/PMMA blends can be varied over a very wide range which can lead to a strong influence on the piezo- and pyroelectric activity and the corresponding coefficients d₃₁ and g₃. The values of d₃₁ and g₃ were found to vary over nearly five decades whereas the normalized coefficients $\text{d}{}_{31}\text{P}$ and $\text{g}{}_3\text{P}$ remain largely unaffected. This emphasizes the importance of the molecular processes causing the macroscopic polarization P during the poling procedure. For a given polarization P and a given temperature T the properties of the polymer matrix, however, are far less important for the values obtained for d₃₁ and g₃. The experimental results were compared with theoretical predictions based on models which were recently developed by Tashiro et al., Broadhurst et al. and by Mopsik et al.. Considering the appropriate scope of each model a good agreement between theory and experiment is observed and general contradictions have not been found.     

Combinatorial synthesis of new cationic lipids and high-throughput screening of their transfection properties

Here we describe the first synthesis-screening approach for the identification and optimization of new cationic lipids for gene transfer in various cell lines. Combinatorial solid-phase chemistry was used to synthesize a library of new cationic lipids based on 3-methylamino-1,2-dihydroxypropane as the polar, cationic lipid part. As the nonpolar lipid part, different hydrocarbon chains were bound to the amino group of the scaffold and the amino group was further methylated to afford constantly cationic lipids. Lipids were synthesized in both configurations and as racemates, and the counter ions were also varied. By using a fully automated transfection screening method and COS-7 cells, the cationic lipid N,N-ditetradecyl-N-methyl-amino-2,3-propanediol (KL-1-14) was identified as a candidate lipid for the development of an improved transfection reagent. Screening the transfection properties of KL-1-14 in numerous combinations with the helper lipids dioleoylphosphatidylethanolamine (DOPE) and cholesterol (Chol) revealed that Chol is the most suitable helper lipid and the best KL-1-14/Chol ratio is 0.5-0.7. Compared to the standard transfection lipid N-[1-(2,3-dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl sulfate (DOTAP), transfection efficiency was improved by a factor of about 40. Furthermore, by using R- and S-configured KL-1-14, it could be shown that the configuration of the lipids had no significant influence on its transfection efficiency. The highest transfection efficiencies were achieved with chloride as the counter ion. The new lipofection reagent was further tested to transfect the cell lines MDA-MB-468, MCF-7, MDCK-C7, and primary dentritic cells (DC), which are important for the development of new anticancer gene therapy strategies. Even in these cells, KL-1-14/Chol (1:0.6) had improved transfection efficiencies, which were about two to four times higher than for DOTAP.     

Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation

Seven different polymers used frequently as adhesives and/or matrix polymers in wood, wood composites, and natural fiber‐reinforced composites were studied by uniaxial tensile tests and nanoindentation. It was shown that the elastic modulus, the hardness, the creep factor, and the elastic‐, plastic‐, and viscoelastic work of indentation of the seven different polymers is essentially the same regardless whether the polymers were tested in the form of pure films or in situ, i.e., in an adhesive bond line with spruce wood. An excellent correlation was found between the elastic modulus measured by tensile tests and the elastic modulus measured by nanoindentation. In spite of the good correlation, the elastic modulus measured by nanoindentation is significantly higher than the elastic modulus measured by tensile tests. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1234–1239, 2006     

Proline versus charge concept for protein stabilization against proteolytic attack

The virtue of the so-called ‘proline concept’ andthe ‘charge concept’ for stabilizing protease-susceptibleregions of a protein structure was compared on bovine pancreaticribonuclease A. Alanine 20 and serine 21, both of whichare located in a loop that is susceptible to the unspecificproteases subtilisin Carlsberg, subtilisin BPN', proteinaseK and elastase, were replaced with proline or lysine by site-directedmutagenesis. The rate constant of proteolysis was decreasedby up to three orders of magnitude for the proline mutants dependingon the site of the mutation and the protease used. In contrast,substitution by lysine increased the proteolytic resistanceby only one order of magnitude characterizing the ‘prolineconcept’ as superior to the ‘charge concept’.Although the four applied proteases are considered to be unspecific,the degree of stabilization of the ribonuclease molecule variedconsiderably, indicating the impact of individual differencesin their substrate specificity on the proteolytic resistanceand degradation pathway of the target protein. Received May 12, 2003; revised October 23, 2003; accepted October 30, 2003     

Adsorption of mercaptopropionic acid onto Au(1 1 1): Part II. Effect on copper electrodeposition

Copper deposition in the presence of an organic additive (3-mercaptopropionic acid, MPA) was studied by cyclic voltammetry and in situ scanning tunneling microscopy (STM) and the results are compared to those for additive-free solutions. It is shown that underpotential deposition (upd) of copper onto a fully MPA-covered electrode produces a defect-rich substrate, but the defects are blocked by the dense organic film for bulk deposition, resulting in a low number of nuclei. A grain-refining effect of MPA, however, was found, when Cu deposition was initiated shortly after addition of MPA to the solution, i.e., for a low-coverage MPA adlayer.     

Charakterisierung und Störstoffanalyse von rückgewonnenen Stoffströmen aus Wärmedämmverbundsystemen

Due to the growing energy requirements, the proportion of external thermal insulation composite systems (ETICS) installed has increased significantly during the past 50 years. Due to the longevity of these systems, ETICS waste is currently accumulating. Owing to the complex construction as well as a multitude of differently installed materials and substances of the past generations, there are many uncertainties and problems with the clean and low-pollutant processing of such systems. In the frame of this work, the ETICS were processed and sorted before being screened for ingredients or pollutants as well as for the purity of the recovered material fractions.     

Comparing Efficiency per Volume of Uniflow Cyclones and Standard Cyclones

A competitive alternative to the standard reverse flow cyclone for gas-solids separation is the uniflow cyclone. Gas and particles passing through it in only one direction, allowing a cost-effective usage in space limited applications. Comprehensive studies of uniflow cyclones have strongly improved their understanding and led to approved design criteria and calculation methods. Here it is shown that uniflow cyclones can achieve higher efficiencies per volume with a low pressure drop than standard cyclones.