Dynamique des lasers à fibre dopée à I’erbium

The dynamics of the erbium doped fiber laser is analysed both experimentally and theoretically. This laser operates spontaneously in self-pulsing, in sinusoidal or in CW regime. Experiments have allowed to determine the control parameters : the cavity losses, the pumping rate and the ion pairs concentration. An antiphase dynamics is observed when the laser operates simultaneously at 1.55 µn and 1.536 µm. The self-pulsing behavior is attributed to a fast energy transfer which occurs between two neighboring ions (pair induced quenching). A simple model considering the active medium as a mixture of isolated ions and ions pairs is developped and leads to a good qualitative agreement with the experimental results.     

Light‐Activated,Multi‐Semiconductor Hybrid Microswimmers

Using a dynamic fabrication process, hybrid, photoactivated microswimmers made from two different semiconductors, titanium dioxide (TiO₂) and cuprous oxide (Cu₂O) are developed, where each material occupies a distinct portion of the multiconstituent particles. Structured light‐activated microswimmers made from only TiO₂ or Cu₂O are observed to be driven in hydrogen peroxide and water most vigorously under UV or blue light, respectively, whereas hybrid structures made from both of these materials exhibit wavelength‐dependent modes of motion due to the disparate responses of each photocatalyst. It is also found that the hybrid particles are activated in water alone, a behavior which is not observed in those made from a single semiconductor, and thus, the system may open up a new class of fuel‐free photoactive colloids that take advantage of semiconductor heterojunctions. The TiO₂/Cu₂O hybrid microswimmer presented here is but an example of a broader method for inducing different modes of motion in a single light‐activated particle, which is not limited to the specific geometries and materials presented in this study.     

Building 2D quasicrystals from 5-fold symmetric corannulene molecules

Nano Research - The formation of long-range ordered aperiodic molecular films on quasicrystalline substrates is a new challenge that provides an opportunity for further surface functionalization....     

A Declarative Approach to Network Device Configuration Correctness

Configuration Logic (CL) is a formal language that allows a network engineer to express constraints in terms of the actual parameters found in the configuration of network devices. We present an efficient algorithm that can automatically check a pool of devices for conformance to a set of CL constraints; moreover, this algorithm can point to the part of the configuration responsible for the error when a constraint is violated. Contrary to other validation approaches that require dumping the configuration of the whole network to a central location in order to be verified, we also present an algorithm that analyzes the correct formulas and greatly helps reduce the amount of data that need to be transferred to that central location, pushing as much of the evaluation of the formula locally on each device. The procedure is also backwards-compatible, in such a way that a device that does not (or only partially) supports a local evaluation may simply return a subset or all of its configuration. These capabilities have been integrated into a network management tool called ValidMaker.     

A multi-year composite of GVI data as a clear reflectance database

A method is developed to generate a top of the atmosphere clear reflectance from the Global Vegetation Index (GVI) product. Our goal is to use this dataset as a threshold to be applied to the forthcoming POLDER observations, for operational cloud detection. The method is based on the hypothesis that clouds add a high frequency signal to the slow variations of the surface reflectance in clear conditions. The validity of our algorithm is verified through an analysis of the temporal profile of the reflectance that it generates. We show that these profiles are better than those resulting from the simpler Maximum Value Composite (MVC) method. The method is applied to five years of GVI products and the results are used to derive a reference database which accounts for the interannual variability of the surface reflectance.     

Evaluation of calibration methods for a helicopter-borne microwave scatterometer

The French frequency modulated continuous waves (FMCW) scatterometer ERASME mounted on small helicopter or aircraft has been designed as dualfrequency (C and X bands) and dualpolarization (HH, VV) to investigate simultaneously the vegetation and the soil responses in radar backscattering. It is operated as a forward looking radar with a large elevation beamwidth (± 10° at 3 db) to observe easily the same surface target over a large range of incidence angles during a single flight. By this ability, ERASME is a complementary research tool for intercalibration of airborne and spaceborne imaging Synthetic Aperture Radars like Radarsat and ASAR and has to be well calibrated in every configuration, both absolutely and relatively for comparisons at different incidence angles.

This paper evaluates different calibration methods to be applied to such an instrument. Absolute calibration within 1 dB is easily obtained by external calibration using metallic corner reflectors. But this method remains insufficient to get the antenna elevation aperture which is essential on natural distributed targets for antenna pattern correction, due to the severe constraint of a narrow azimuthal beam and flight parameters (pitch, roll, altitude) varying quickly in time and range.

The external calibration is strongly improved by using a statistical analysis of data obtained over natural targets which analyses the correlation between the processed data and the recorded flight parameters. This method appears promising, but its application on natural targets with random variations need specific statistical properties of the data set. It is operative for high antenna setting (here 38° incidence angle) and mostly over bare soils, with low of σ⁰ variances and σ² correlation length of the order of the correlation length of pitch. It provides the aperture range around the antenna axis and an accuracy of 0.5 dB upon erσ⁰ is achieved providing the antenna pattern correction are done.     

Technical Note Simulation of MEIS-II data on 5S code to quantify algal concentration in an intertidal area

An atmospheric correction algorithm due to Deschamps et al. (1981) has been applied to MEIS-II data. Some atmospheric conditions such as continental and maritime aerosol models have been used in this work. Simulation on 5S code was made with Thematic Mapper Band 4 and Spot band 3. All these pieces of the puzzle permitted the qualification of algal concentration in an intertidal area, which was the aim of this work. Continental or maritime aerosol models gave a similar result due probably to the specific area, located between land and nearshore. Apparent radiance is smaller than corrected radiance because absorption process takes place in this part of the spectrum (0.8 to 0.9μm). When apparent radiance is higher than 30 Wm^?2 sr^?1 μm^?1 algal concentration is overestimated by up to 60 per cent.     

An application-oriented,optimization-based methodology for interactive design of engineering systems†

Motivated by a control system example, a new methodology is proposed for tackling optimal design of engineering systems. This methodology emphasizes designer's intuition and man-machine interaction. It includes a classification of specifications into various types and a scaling of specification space and parameter spaces based on the designer's knowledge of the particular application. An algorithm is proposed for solving the resulting constrained ‘minimax’ optimization problem and its convergence is proved. Finally, an application-oriented user front-end is presented. The methodology discussed in this paper has been implemented in the DELIGHT system and has been successfully used in various types of applications.