Detection of Channel Variations to Improve Channel Estimation Methods

In current digital communication systems, channel information is typically acquired by supervised approaches that use pilot symbols included in the transmit frames. Given that pilot symbols do not convey user data, they penalize throughput spectral efficiency, and transmit energy consumption of the system. Unsupervised channel estimation algorithms could be used to mitigate the aforementioned drawbacks although they present higher computational complexity than that offered by supervised ones. This paper proposes a simple decision method suitable for slowly varying channels to determine whether the channel has suffered a significant variation, which requires to estimate the matrix of the recently changed channel. Otherwise, a previous estimate is used to recover the transmitted symbols. The main advantage of this method is that the decision criterion is only based on information acquired during the time frame synchronization, which is carried out at the receiver. We show that the proposed criterion provides a considerable improvement of computational complexity for both supervised and unsupervised methods, without incurring in a penalization in terms of symbol error ratio. Specifically, we consider systems that make use of the popular Alamouti code. Performance evaluation is accomplished by means of simulated channels as well as making use of indoor wireless channels measured using a testbed.     

Comparison of methods for the assessment of growth of food spoilage moulds in solid substrates

The objective of the study was to evaluate the general suitability of ergosterol content, CFU, and colony diameters determinations for a range of fungi representing food spoilage moulds for the assessment of their growth on solid substrates, in particular intermediate moisture foods. Sixteen food-borne mould species were inoculated onto DG18 agar overlaid with cellophane, allowing determination of a direct measurement of biomass density weighing. The samples were also evaluated with regard to visible and microscopic colony diameters, total ergosterol content, Thoma counts, viable CFU counts, and so on. The same parameters were assayed in the spore suspensions obtained from those cultures. Data were evaluated by multivariate data analysis using projection methods such as principal component analysis (PCA), showing some groupings among the measured variables, mainly linked to the sporulating/nonsporulating nature of the different species tested. Ratios among the different variables were obtained, compared among the species, and evaluated along time (2-10 days). It was concluded that, as a general rule for all the species, ergosterol content and colony diameters were better correlated to fungal biomass dry weight than CFU counts were. Conversion factors were 0.3-3 microg ergosterol mg(-1) biomass dry weight and 76-227 mg biomass dry weight cm(-2), depending on the species.     

New food safety challenges of viral contamination from a global perspective: Conventional,emerging, and novel methods of viral control

Food- and waterborne viruses, such as human norovirus, hepatitis A virus, hepatitis E virus, rotaviruses, astroviruses, adenoviruses, and enteroviruses, are major contributors to all foodborne illnesses. Their small size, structure, and ability to clump and attach to inanimate surfaces make viruses challenging to reduce or eliminate, especially in the presence of inorganic or organic soils. Besides traditional wet and dry methods of disinfection using chemicals and heat, emerging physical nonthermal decontamination techniques (irradiation, ultraviolet, pulsed light, high hydrostatic pressure, cold atmospheric plasma, and pulsed electric field), novel virucidal surfaces, and bioactive compounds are examined for their potential to inactivate viruses on the surfaces of foods or food contact surfaces (tools, equipment, hands, etc.). Every disinfection technique is discussed based on its efficiency against viruses, specific advantages and disadvantages, and limitations. Structure, genomic organization, and molecular biology of different virus strains are reviewed, as they are key in determining these techniques effectiveness in controlling all or specific foodborne viruses. Selecting suitable viral decontamination techniques requires that their antiviral mechanism of action and ability to reduce virus infectivity must be taken into consideration. Furthermore, details about critical treatments parameters essential to control foodborne viruses in a food production environment are discussed, as they are also determinative in defining best disinfection and hygiene practices preventing viral infection after consuming a food product.     

Development,Characterization, and Stability of O/W Pepper Nanoemulsions Produced by High-Pressure Homogenization

Interest in the utilization of bioactive plant compounds in foods has increased due to their biochemical activities (antioxidant, antimicrobial, etc.), and as alternatives in the reduction of the use of high concentrations of chemical substances. However, some of these additives are hydrophobic, thus being harder to disperse into the food matrix, which is generally water-based. A good alternative is the use of low concentrations of these compounds as nanoemulsions. The objective of the present study was to develop oil-in-water nanoemulsions containing “dedo-de-moça” pepper extract for food applications. Research in the development of these nanoemulsions was carried out using a high-speed homogenizer, followed by a high-pressure homogenizer. The influence of the following parameters was assessed: type and concentration of surfactants, hidrophilic-lipophilic balance, lipid/aqueous phase ratio, surfactant/oil ratio, pepper extract composition in nanoemulsion, and processing conditions. Nanoemulsions were evaluated by environmental (centrifugal and thermal) and storage stabilities, characterized by average droplet size and ζ-potential measurements, color, interfacial tension, atomic force, and cryo-scanning electron microscopy. Those with average droplet size between 132 ± 2.0 and 145 ± 1.0 nm were developed depending on working pressure and number of cycles; ζ-potential was around ? 36.71 ± 0.62 mV and the best nanoemulsion was stable to centrifugation and most of the thermal stresses. Droplets were characterized with cryo-scanning electron microscopy as being spherical, homogeneous, and stable, and remained stable when stored at 4 °C and room temperature for over 120 days. The pepper nanoemulsion, developed in the present study, has potential applications in the food industry.     

Losses of volatile compounds during fermentation

The ability of fermentative CO₂ to blow off the volatile compounds that are synthesized during fermentation has been studied. Model solutions simulating a fermenting must were purged at different CO₂ flow rates and temperatures, and the amount of volatile compounds blown off by the stream of CO₂ was recorded by high-resolution gas chromatography. Data showed that under normal fermenting conditions, fatty acid ethyl esters and some fusel alcohol acetates are blown off the solution at a high rate. The maximum loss rate was observed for ethyl decanoate. The purging speed is doubled when temperature increases from 17 °C to 27 °C. Losses can be interpreted by a linear model and are a function of the compound and the flow rate of CO₂. These models allow us to reconstruct the volatile synthesis vs time functions through graphic calculus and to estimate the proportion of volatile material retained, hydrolysed and purged. Synthesis takes place during the tumultuous period of fermentation together with CO₂ production that blows off the volatile material. Hydrolysis takes place in the last stages of fermentation. In a 10-1 open fermenter, up to 80% of volatile material can be blown off while an average of 10% is retained. Residual esterase activity accounts for about 20% of the total amount of ester synthesized.     

Biocomposite Films Based on κ-Carrageenan/Locust Bean Gum Blends and Clays: Physical and Antimicrobial Properties

The aims of this work were to evaluate the physical and antimicrobial properties of biodegradable films composed of mixtures of κ-carrageenan (κ-car) and locust bean gum (LBG) when organically modified clay Cloisite 30B (C30B) was dispersed in the biopolymer matrix. Film-forming solutions were prepared by adding C30B (ranging from 0 to 16 wt.%) into the κ-car/LBG solution (40/60 wt.%) with 0.3 % (w/v) of glycerol. Barrier properties (water vapour permeability, P _vapour; CO₂ and O₂ permeabilities), mechanical properties (tensile strength, TS, and elongation-at-break, EB) and thermal stability of the resulting films were determined and related with the incorporation of C30B. Also, X-ray diffraction (XRD) was done in order to investigate the effect of C30B in film structure. Antimicrobial effects of these films against Listeria monocytogenes, Escherichia coli and Salmonella enterica were also evaluated. The increase of clay concentration causes a decrease of P _vapour (from 5.34?×?10^?11 to 3.19?×?10^?11 g (m s?Pa)^?1) and an increase of the CO₂ permeability (from 2.26?×?10^?14 to 2.91?×?10^?14 g (m s?Pa)^?1) and did not changed significantly the O₂ permeability for films with 0 and 16 wt.% C30B, respectively. Films with 16 wt.% clay exhibited the highest values of TS (33.82 MPa) and EB (29.82 %). XRD patterns of the films indicated that a degree of exfoliation is attained depending on clay concentration. κ-car/LBG–C30B films exhibited an inhibitory effect only against L. monocytogenes. κ-car/LBG–C30B composite films are a promising alternative to synthetic films in order to improve the shelf life and safety of food products.     

Local Notions of Healthy Eating and National Dietary Guidelines: A Comparison in Vulnerable Salvadoran Communities

This study presents an assessment of local definitions and perceptions concerning healthy eating through a study in four resource-poor border communities in El Salvador. The study included focus groups, key-informant interviews, and observations of the food environment. Local definitions of healthy eating elicited through focus groups were compared to the national Salvadoran dietary guidelines recommendations. The comparison revealed several areas of overlap (including the importance of dietary variety, fruits, and vegetables, among others) and omissions (mention of limiting sweets/candy, salt, sugar, and alcohol). Focus group participants expressed concerns over the origin of their foods and whether food contained harmful chemicals. These conversations also revealed the contradictions between nutrition knowledge and preferences for foods classified as unhealthy. This article concludes with a discussion about barriers to healthy eating identified in the focus groups and through the food environment assessment.     

Influence of air temperature on drying kinetics and antioxidant potential of olive pomace

This work aims to evaluate the influence of olive pomace drying (a solid by-product of the olive oil industry) on both antioxidant potential and drying kinetics. The two main fractions of olive pomace (pits, PI and pulps + peels, P + P) were characterized by image analysis and density measurement. The drying process was analyzed in experiments carried out at different temperatures (from 50 to 150 °C) and mathematically described from the diffusion and Weibull models. The antioxidant potential of the extracts (ethanol–water 80:20 v/v, 22 ± 1 °C, 170 rpm for 24 h) obtained from the dry product was analyzed by measuring the total phenolic content and antioxidant capacity and the main polyphenols were quantified by HPLC–DAD/MS–MS.