Production of steam cracking feedstocks by mild cracking of plastic wastes

In this work the utility of new possible petrochemical feedstocks obtained by plastic waste cracking has been studied. The cracking process of polyethylene (PE), polyethylene-polypropylene (PEPP) and polyethylene-polystyrene (PEPS) has been carried out in a pilot scale tubular reactor. In this process mild reaction parameters has been applied, with the temperature of 530 °C and the residence time of 15 min. The produced hydrocarbon fractions as light- and middle distillates were tested by using a laboratory steam cracking unit.It was concluded that the products of the mild cracking of plastic wastes could be applied as petrochemical feedstocks. Based on the analytical data it was determined that these liquid products contained in significant concentration (25-50 wt.%) of olefin hydrocarbons. Moreover the cracking of polystyrene containing raw material resulted in liquid products with significant amounts of aromatic hydrocarbons too. The steam cracking experiments proved that the products obtained by PE and PEPP cracking resulted in similar or better ethylene and propylene yields than the reference samples, however the aromatic content of PEPS products reduced the ethylene and propylene yields.     

Condensing boiler applications in the process industry

Major challenging issues such as climate change, energy prices and fuel security have focussed the attention of process industries on their energy efficiency and opportunities for improvement. The main objective of this research study was to investigate technologies needed to exploit the large amount of low grade heat available from a flue gas condensing system through industrial condensing boilers. The technology and application of industrial condensing boilers in various heating systems were extensively reviewed. As the condensers require site-specific engineering design, a case study was carried out to investigate the feasibility (technically and economically) of applying condensing boilers in a large scale district heating system (40 MW). The study showed that by recovering the latent heat of water vapour in the flue gas through condensing boilers, the whole heating system could achieve significantly higher efficiency levels than conventional boilers. In addition to waste heat recovery, condensing boilers can also be optimised for emission abatement, especially for particle removal. Two technical barriers for the condensing boiler application are corrosion and return water temperatures. Highly corrosion-resistant material is required for condensing boiler manufacture. The thermal design of a “case study” single pass shell-and-tube condensing heat exchanger/condenser showed that a considerable amount of thermal resistance was on the shell-side. Based on the case study calculations, approximately 4900 m² of total heat transfer area was required, if stainless steel was used as a construction material. If the heat transfer area was made of carbon steel, then polypropylene could be used as the corrosion-resistant coating material outside the tubes. The addition of polypropylene coating increased the tube wall thermal resistance, hence the required heat transfer area was approximately 5800 m². Net Present Value (NPV) calculations showed that the choice of a carbon steel condenser ensured cash return in a relatively shorter period of time (i.e. 2 years) when compared to a stainless steel condenser (i.e. 5-7 years). Moreover, the NPV for the stainless steel was more sensitive to the change of the interest rate.     

Intrauterine and Postnatal Exposure to High Levels of Fluoride Is Associated with Motor Impairments,Oxidative Stress,and Morphological Damage in the Cerebellum of Offspring Rats

Fluoride (F) is abundantly present on Earth and plays a beneficial role in human health. However, exposure to high doses of F can be a risk, mainly in endemic fluorosis regions. In light of this, we investigated the effects of F exposure during the intrauterine and postnatal periods of rats, in doses similar to those recommended in drinking water and the levels of F in regions with endemic fluorosis, on the offspring rats’ cerebellum. Pregnant rats were divided into three groups: control (received ultrapure water only), 10 mg F/L, and 50 mg F/L for a period of 42 days (21 days gestation and 21 days lactation). At the end of the lactation period, the male pups were evaluated by behavioral tests, morphological markers, and biochemistry assays. The results pointed out that 50 mg F/L exposure during the intrauterine and lactational period of rats is capable of promoting oxidative stress in the cerebellum with a decrease in Purkinje cell density and myelin basic protein compromise, which could be associated with functional motor impairments. In addition, although 10 mg F/L exposure promoted redox alterations, it did not affect other parameters evaluated, highlighting the safe use of F in low doses.     

Large-scale dendrimer-based uneven nanopatterns for the study of local arginine-glycine-aspartic acid （RGD） density effects on cell adhesion

Cell adhesion processes are governed by the nanoscale arrangement of the extracellular matrix （ECM）, being more affected by local rather than global concentrations of cell adhesive ligands. In many cell-based studies, grafting of dendrimers on surfaces has shown the benefits of the local increase in concentration provided by the dendritic configuration, although the lack of any reported surface characterization has limited any direct correlation between dendrimer disposition and cell response. In order to establish a proper correlation, some control over dendrimer surface deposition is desirable. Here, dendrimer nanopatterning has been employed to address arginine-glycine-aspartic acid （RGD） density effects on cell adhesion. Nanopatterned surfaces were fully characterized by atomic force microscopy （AFM）, scanning tunneling microscopy （STM） and X-ray photoelectron spectroscopy （XPS）, showing that tunable distributions of cell adhesive ligands on the surface are obtained as a function of the initial dendrimer bulk concentration. Cell experiments showed a clear correlation with dendrimer surface layout： Substrates presenting regions of high local ligand density resulted in a higher percentage of adhered cells and a higher degree of maturation of focal adhesions （FAs）. Therefore, dendrimer nano- patterning is presented as a suitable and controlled approach to address the effect of local ligand density on cell response. Moreover, due to the easy modification of dendrimer peripheral groups, dendrimer nanopatterning can be further extended to other ECM ligands having density effects on cells.     

The effect of incomplete sessions on peer-to-peer video on demand

Video on demand systems are going to be important services of the future Internet. To achieve scalability and fault tolerance, these systems should rely on distributed video delivery schemes, using peer-to-peer (P2P) networks built among the clients. However, generic P2P data sharing protocols cannot guarantee timely arrival of the video segments. Therefore, they must be adapted to video streaming by restricting P2P delivery into a download window. In this paper we investigate the effect of the frequently occurring phenomenon of incomplete sessions on the efficiency of stored video streaming via P2P data distribution. Through theoretical considerations and a simulation study, we’ve found that with a P2P download window the number of superfluous downloads can be limited, while retaining the efficiency of the P2P distribution.     

Austerity and reform to affordable housing policy

The recession has created significant challenges for the government with regard to providing affordable housing. Even during the UK’s housing boom the supply of housing failed to keep pace with demand. Therefore, increasing housing supply and improving affordability in a recessionary period will require the government to innovatively utilise their limited resources. Following the Comprehensive Spending Review in 2010 severe cuts to the housing budget were made and radical reforms to housing and planning policy have been proposed by the coalition government. The paper briefly discusses the UK housing market and affordable housing policy and practice recently employed in England. Subsequently a discussion of the coalition government’s recent reforms to housing and planning policy, concerning affordable housing, is presented.     

Calcium phosphate and calcium carbonate mineralization of bioinspired hydrogels based on β-chitin isolated from biomineral of the common cuttlefish (<Emphasis Type="Italic">Sepia officinalis</Emphasis>, L.)

Chitin, a bioactive, antibacterial and biodegradable polymer is commonly utilized by diverse marine organisms as the main scaffold material during biomineralization. Due to its properties, chitin is also of interest as a component of organo-inorganic composites for diverse biomedical applications. In this study, chitinous fibers isolated from the cuttlebone of the common cuttlefish (Sepia officinalis, L.) are characterized and evaluated for use as an integral part of mineralized hydrogels for biomedical applications. Since marine organisms use calcium carbonates (CaCO₃), while vertebrates use calcium phosphates (CaP) as the main inorganic hard tissue components, and both minerals are used in hard tissue engineering, they were compared to determine which composite is potentially a better biomaterial. Hydrogel mineralization was conducted by subsequent dipping into cationic and anionic reactant solutions, resulting in the formation of a CaCO₃ or CaP coating that penetrated into the hydrogel. Obtained composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), rheology, swelling tests and simple compression. The results indicate that β-chitin can be used for the preparation of moldable hydrogels that are easily mineralized. Mineralized hydrogels have higher elasticity than non-mineralized ones while swelling is better if the extent of mineralization is lower. Further optimization of the hydrogels composition could improve their stress response and Young’s modulus, where the current hydrogel with a higher extent of CaP mineralization excels in comparison to all other investigated composites.     

Studying Bacillus cereus's ability to biodegrade crude oil in hot areas

In this study, the biodegrading ability of three spices of Bacillus isolated from a soil, which was contaminated by crude oil, was studied. Isolated species are able to biodegrade crude oil carbohydrates by producing biosurfactants and lowering the rate of surface tension at different temperatures and pHs. The decrease of surface tension from 57 mN/m to 31 mN/m at 37°C and to 32.5 mN/m at 20°C by Bacillus cereus B1 in samples with 1% crude oil can be referred to as the results of this research.     

Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al–Cu–Ni Alloys

Al–Cu–Ni alloys are of scientific and technological interest due to high strength/high temperature applications, based on the reinforcement originated from the interaction between the Al-rich phase and intermetallic composites. The nature, morphology, size, volume fraction and dispersion of IMCs particles throughout the Al-rich matrix are important factors determining the resulting mechanical and chemical properties. The present work aims to evaluate the effect of the addition of 1wt%Ni into Al–5wt%Cu and Al–15wt%Cu alloys on the solidification rate, macrosegregation, microstructure features and the interrelations of such characteristics on tensile and corrosion properties. A directional solidification technique is used permitting a wide range of microstructural scales to be examined. Experimental growth laws relating the primary and secondary dendritic spacings to growth rate and solidification cooling rate are proposed, and Hall–Petch type equations are derived relating the ultimate tensile strength and elongation to the primary dendritic spacing. Considering a compromise between ultimate tensile strength and corrosion resistance of the examined alloys samples from both alloys castings it is shown that the samples having more refined microstructures are associated with the highest values of such properties.