Electrochemical properties of ultra-long,aligned, carbon nanotube array electrode in organic electrolyte

The electrochemical properties of an electrochemical double-layer capacitor electrode based on an ultra-long (500 μm), aligned, carbon nanotube array (ACNTA) in Et₄NPF₆/propylene carbonate electrolyte are examined. The specific capacitance of the ACNTA electrode in an organic electrolyte is 24.5 F g⁻¹, which is larger than that obtained in an aqueous electrolyte. The results of ac impedance measurements show that the ACNTA electrode gives a high power density and an excellent rate capability in an organic electrolyte. It is shown that the ACNTA electrode has a lower equivalent series resistance and a better rate capability than activated carbon electrode. This is due to the fact that ACNTA possesses a larger pore size and a more a regular pore structure. Both these features are conformed by scanning electron microscopic and nitrogen gas adsorption studies.     

创新铁路运输方式实现750m^3高炉富余铁水分流

针对750m^3高炉铁水生产富余状况，制订了富余铁水向铸铁机铸铁的调送方案，通过创新思维、系统挖潜、优化资源配置等措施的实施，保证了750m^3高炉的正常生产，取得了良好效果。     

柔性轧制Q390C和Q420C钢板生产实践

目前市场对中厚板的订单具有个性化和多样化的特点，而对于不同强度级别的钢板，化学成分设计往往是不同的，这样会增加不同钢坯冶炼之间衔接的时间及化学成分控制的难度，导致冶炼成本增加，工序复杂化。结合市场需求与生产实际，采用同一Q390低合金高强度钢板坯，通过不同的控轧控冷工艺，对Q390C和Q420C两种强度级别热轧钢板进行了试制。结果表明，通过控轧控冷技术，可以充分发挥细晶强化作用，采用同一Q390低合金高强度钢板坯实现了Q390C和Q420C两个强度级别热轧钢板的柔性生产。试制生产的两种钢板，强塑性及0 ℃冲击功均满足标准要求，Q420C钢板屈服强度达441 MPa以上，抗拉强度达579 MPa以上。采用柔性轧制技术，降低了Q420C高强钢板的生产成本。     

Efficient encoding of IEEE 802.11n LDPC codes

Addressed is the issue of LDPC coding for the emerging IEEE 802.11n standard. An efficient encoding algorithm is proposed. The algorithm is simple and easy to implement. The memory requirement is trivial     

Dielectric loaded HTS resonators as frequency standards andlow-phase noise oscillators

High-quality, high-temperature superconducting (HTS) thin-films exhibit very low losses at microwave frequencies and, as a result, allow very high Q resonators to be produced. The size of such resonators may be significantly reduced by loading with low-loss single crystal dielectric. The potential for HTS dielectric loaded resonators as practical frequency standards and reference elements for low-phase-noise oscillators is assessed, with emphasis on operation at 60 K, a temperature readily attainable with compact Stirling cycle coolers     

Scattering center parameterization of wide-angle backscattered datausing adaptive Gaussian representation

We present a scattering center extraction algorithm to parameterize the backscattered data from complex targets collected over large angular apertures. This parameterization is based on a scattering center model of the target, but includes an aspect-dependent amplitude function for each scattering center. A two-dimensional (2-D) adaptive Gaussian representation (AGR) algorithm is used to extract the position and the amplitude function associated with each scattering center. The algorithm is tested with data generated by the Xpatch radar simulation code as well as chamber measurement data. The results show that a very good compression ratio can be achieved, resulting in a compact scattering center model of the target. Once such model is available, we can easily reconstruct range profiles and ISAR images at any aspect on the same plane with good accuracy     

微波在免疫组织化学中的应用

本文综述微波技术在免疫组织化学中的应用两头及其进展，着重介绍了微波在组织固定、抗原恢复和免疫染色方面的应用，并对微波免疫组织化学的应用前景进行了展望 。     

Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

机械制图虚拟实验室的研究与设计

论述了一个网络化，信息化实验系统开发的方法和思路。该系统以虚拟技术为支撑，以图学教育的宗旨为核心，综合利用了虚拟技术的各种开发工具和理论，具有虚拟现实系统常有的特点，沉浸感，交互性，构想。