单液晶光阀彩色大屏幕投影显示

设计一电路,将彩色图象信息编码到黑白CRT的亮度之中,并将其写入液晶光阀,用白光读出,当编码合适时,读出的象颜色可与原图像一致。本文讨论了这一技术原理并进行了单液晶光阀彩色大屏幕投影的实验验证。     

BID: a novel BH3 domain-only death agonist

The BCL-2 family of proteins consists of both antagonists (e.g., BCL-2) and agonists (e.g., BAX) that regulate apoptosis and compete through dimerization. The BH1 and BH2 domains of BCL-2 are required to heterodimerize with BAX and to repress cell death; conversely, the BH3 domain of BAX is required to heterodimerize with BCL-2 and to promote cell death. To extend this pathway, we used interactive cloning to identify Bid, which encodes a novel death agonist that heterodimerizes with either agonists (BAX) or antagonists (BCL-2). BID possesses only the BH3 domain, lacks a carboxy-terminal signal-anchor segment, and is found in both cytosolic and membrane locations. BID counters the protective effect of BCL-2. Moreover, expression of BID, without another death stimulus, induces ICE-like proteases and apoptosis. Mutagenesis revealed that an intact BH3 domain of BID was required to bind the BH1 domain of either BCL-2 or BAX. A BH3 mutant of BID that still heterodimerized with BCL-2 failed to promote apoptosis, dissociating these activities. In contrast, the only BID BH3 mutant that retained death promoting activity interacted with BAX, but not BCL-2. This BH3-only molecule supports BH3 as a death domain and favors a model in which BID represents a death ligand for the membrane-bound receptor BAX.     

传感器可靠性技术—传感器可靠性特征量

介绍已知试验数据如何计算可靠性特征量的点估计和区间估计     

中和室脉冲进气的蒙特卡罗模拟及实验验证

对于中和室内的脉冲气体，用蒙特卡罗方法模拟了气体压力沿轴向的分布。并用模拟进气系统和气压瞬时测量系统，对模拟结果进行了验证。得到与模拟结果较为一致的曲线，从而为注入器真空系统的设计提供了可靠的依据。并通过实验结果，给出了气体靶厚的建立时间约为６０ｍｓ。     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

正交试验法于优选白瓷坯料配方中的应用

对长石、石英、龙岩土、莱阳土４种因素各取４个水平，用正交表Ｌ１６（４５）安排１６个试验，分析了这１６个试验产品的吸水率、白度、热稳定性与每种因素各水平之间的关系．得出了白瓷坯料的最佳配方。其中，长石１９，石英２１，龙岩土２１．莱阳土０．     

Fischer-Tropsch synthesis on Fe-Mn ultrafine catalysts

The Fischer-Tropsch (FT) synthesis on Fe-Mn ultrafine catalysts prepared by a special degradation method of Fe-Mn complexes is presented. The effects of preparation method and Mn content on the FT performance are examined and the active phases and the role of Mn are elucidated.     

提高老采区资源回采率的若干途径

云应盐矿区通过新旧盐井更替、改造井身结构、完善分采工艺等技术措施，提高了老采区的资源回收率，实现了对老采区的挖潜改造。     

几种火焰喷焊自熔性合金层的耐磨性能

研究了不同自熔性合金粉末火焰喷焊层的显微组织与抗磨粒磨损性能，并对其磨面形貌进行了ＳＥＭ观察分析。结果表明，在Ｎｉ６０自熔性合金中加入适量的镍包ＷＣ粉末可明显提高其喷焊层的抗磨粒磨损性能。当ＷＣ的加入量为３５％（ｗｔ）左右时，该喷焊层与６０Ｓｉ２Ｍｎ调质钢相比，相对的耐磨性可提高６倍以上。     

A study of stacking faults in deformed austenitic stainless steel by X-ray diffraction

Making use of the data obtained already in our laboratory on elongated, quenched samples of austenitic steel lCrl8Ni9, such as the effective domain size D_eff, the average dislocation density-ρ, the average dislocation configuration parameter, -M, the range of strain field -R_e, the elastic energy density 〈E/V〉,etc., some exact and clear expressions for the relation of intrinsic stack-ing fault (SF) density α′, extrinsic SF density α″, twin fault density β, SF energy γ, true particle size D₀, minimum value of the fault width T_min, and maximum particle size D_max are given.