Super‐reflective color LCD with PDLC technology

Abstract— A novel reflective color LCD without polarizers has been developed using a PDLC film and a retro‐reflector. Bright color images including moving images are achievable with ambient light. This novel LCD will enable the new application area of electronic paper.     

A negative Vth cell architecture for highly scalable,excellently noise-immune, and highly reliable NAND flash memories

A new, negative V_th cell architecture is proposed where both the erased and the programmed state have negative V_th. This architecture realizes highly scalable, excellently noise-immune, and highly reliable NAND flash memories. The program disturbance that limits the scaling of a local oxidation of silicon (LOCOS) width in a conventional NAND-type cell is drastically reduced. As a result, the scaling limit of the LOCOS width decreases from 0.56 to 0.45 μm, which leads to 20% isolation width reduction. The proposed cell is essential for the future scaled shallow trench isolated cells because improved program disturb characteristics can be obtained irrespective of the process technology or feature size. New circuit techniques, such as a PMOS drive column latch and a V_cc-bit-line shield sensing method are also utilized to realize the proposed cell operation. By using these novel circuit technologies, array noise, such as a source-line noise and an inter bit line capacitive coupling noise, are eliminated. Consequently, the V_th fluctuation due to array noise is reduced from 0.7 to 0.1 V, and the V_th distribution width decreases from 1.2 to 0.6 V. In addition to the smaller cell size and the high noise immunity, the proposed cell improves device reliability. The read disturb time increases by more than three orders of magnitude, and a highly reliable operation can be realized     

Molecular dynamics simulation of pressure effect on phase transition behaviour and dynamics in the isotropic and discotic nematic phases

Molecular dynamics simulation was performed at constant temperature and pressure to investigate the effect of pressure on molecular dynamics for disc-shaped molecules. The generic Gay-Berne model, GB(0.345, 5.0, 1, 3), was used to study the phase transition behaviour, and translational and rotational dynamics, under two different reduced pressures P^?, 10.0 and 20.0. Obvious shifts were detected in the transition temperatures. Both systems have the same phase sequence with different pressures: isotropic, discotic nematic and columnar phases. Translational motion is characterised by the parallel and perpendicular components of diffusion coefficients, with respect to the director in the orientational ordered phase. With regard to rotational dynamics, the correlation time of the first-rank orientational time autocorrelation function, which corresponds to end-over-end rotational motion of a molecule, has been investigated. A clear jump in the temperature dependence of the correlation time has been found at the isotropic-nematic phase transition point. The retardation factor g_|| as a function of the reduced temperature T^?/T_NI^? shows an apparent pressure effect on the rotational dynamics.     

Propagation Path Visibility Estimation for Radio Local Distribution Systems in Built-Up Areas

For the design of radio local distribution systems in densely built-up areas, estimating how many subscribers are in sight from a nodal station is important. This paper proposes a method for estimating probability of success of line-of-sight paths termed visibility. Method validity is confirmed bypractical field examinations.     

Ion-implanted and permalloy hybrid magnetic bubble memory devices

Hybrid bubble memory devices have been proposed and operated with the memory density of 4 Mbit/cm². In the hybrid bubble memory devices, minor loops are composed of ion-implanted tracks with 4-µm period, and major lines and functional parts including block-replicate and swap gates are composed of Permalloy tracks with a longer period of 12 µm. Passive junctions between ion-implanted and Permalloy tracks have been developed, introducing the tapered ion-implantation technique. Improving the characteristics of the functional parts composed of Permalloy tracks, the hybrid bubble memory devices with block-replicate and swap gates have been operated, and the feasibility of the devices has been confirmed. In addition, the possibility of higher memory density has been shown.     

Significant improvement of magnetic properties and corrosion resistance in evaporated Co-Ni recording media

An addition of a very small amount of Pr in Co-Ni films of a recording medium improves both corrosion resistance and frequency response. The columnar grains, which are induced by oblique incidence of evaporation, becomes remarkably finer by the addition of rare-earth elements. The TEM image of the cross section of the films shows a dense packed structure. High magnetization and a better corrosion resistance are considered to be due to the dense packed structure. The fine grain improves the frequency response. Among several rare-earth elements, especially Pr doping yields a best recording performance.     

Oral Sustained Delivery of Theophylline and Cimetidine from In Situ Gelling Pectin Formulations in Rabbits

ABSTRACT

The aim of this study was to evaluate the potential of an in situ gelling pectin formulation as a vehicle for the oral sustained delivery of theophylline and cimetidine. In vitro studies demonstrated diffusion-controlled release of theophylline from 1, 1.5, and 2% w/v pectin gels. Release of this drug from 1.5% w/v pectin gels formed in situ in rabbit stomach was sustained over a period of 12 hours giving a theophylline bioavailability some seven fold higher than when administered from a commercial syrup. In contrast, interactions between cimetidine and pectin led to weak gelation of the pectin sols that prevented any meaningful determination of in vitro release characteristics. Similarly, in vivo release profiles from pectin formulations containing cimetidine were similar to that from a solution of this drug in buffer, indicative of weak gelation. Examination of the content of the rabbit stomach 5 hours after administration of 1.5% w/v pectin sols containing drug confirmed gel formation, but gels containing cimetidine were noticeably softer than those containing theophylline.     

Femtosecond-laser-induced nanostructure formation and surface modification of diamond-like carbon film

This paper reports the pump and probe experiment for in situ reflectivity measurements in the femtosecond laser ablation that brings about nanoscale modification of diamond-like carbon (DLC) film. The characteristic reflectivity changes observed demonstrate that the formation of periodic nanostructure is preceded by a change in bonding structure of DLC in the ablation at low fluences. We have observed a coherent nonlinear wave-mixing signal that can resolve the ultrafast interaction processes for the nanoscale modification on the film surface. Based on the results obtained, a model of the interaction process is proposed.     

Partial nickel plating using organic gel electrolyte

A partial nickel plating method was developed by using the organic gel electrolyte. The gel electrolyte was made from polyvinylchloride as a gelling agent and tetrahydrofuran as an organic solvent. The suitable conditions for nickel plating were investigated by the measurements of polarization curve and electrochemical impedance. The pattern electroplating using thin layer of gel electrolyte was carried out on the copper substrate. The substrate surface could be plated by nickel with high uniformity and sharp edge line. The present method will be widely used for the surface patterning without masking.