混合式P2P系统中基于缓存的多项查询方法研究

首先从混合式P2P网络拓扑结构出发,结合DHT思想,提出了基于DHT的层次化P2P网络模型.其次根据在文档集巨大的情况下,用户提交的查询不可能"面面俱到",实际用来回答查询的文档仅仅是文档集中很小的一部分这一思想,在层次化P2P模型的超级节点中建立了分布式缓存,运用分布式索引与缓存技术,提出一种新的方法来解决多项查询问题.即由多项查询中的某个关键字key,根据hash函数定位到负责该key的超级节点,查询该节点上的分布式索引得到缓存具体存储位置,最终将结果返回给用户,如若缓存中没有所要查询的内容,则广播该查询,同时根据系统中的历史广播查询信息来计算某个待选缓存项的利益值,利益最大的待选项加入缓存.一般针对多项查询的泛洪算法往往会造成巨大的网络信息量,提出的方法牺牲了超级节点上一小部分的存储力,缓解了多项查询造成的网络拥挤现象.同时,基于DHT的层次化P2P模型也具有很好的稳定性,不会因为大量节点的动态加入或者退出而无法进行多项查询.     

Sentinel-1-based flood mapping: a fully automated processing chain

This article presents an automated Sentinel-1-based processing chain designed for flood detection and monitoring in near-real-time (NRT). Since no user intervention is required at any stage of the flood mapping procedure, the processing chain allows deriving time-critical disaster information in less than 45 min after a new data set is available on the Sentinel Data Hub of the European Space Agency (ESA). Due to the systematic acquisition strategy and high repetition rate of Sentinel-1, the processing chain can be set up as a web-based service that regularly informs users about the current flood conditions in a given area of interest. The thematic accuracy of the thematic processor has been assessed for two test sites of a flood situation at the border between Greece and Turkey with encouraging overall accuracies between 94.0% and 96.1% and Cohen’s kappa coefficients (κ) ranging from 0.879 to 0.910. The accuracy assessment, which was performed separately for the standard polarizations (VV/VH) of the interferometric wide swath (IW) mode of Sentinel-1, further indicates that under calm wind conditions, slightly higher thematic accuracies can be achieved by using VV instead of VH polarization data.     

Surface tension calculation of the Ni3S2---FeS---Cu2S mattes

The surface tension of the Ni₃S₂-FeS-Cu₂S ternary mattes have been calculated from those of the Ni₃S₂-FeS·FeS-Cu₂S and Cu₂S-Ni₃S₂ pseudo-binary boundary systems by using geometric models (Kohler and Toop model) and a general solution model (Chou model). Taking account of the experimental accuracy of ±2.5%, the respective calculated results are in agreement with the experimental data. At the same time, surface tensions of molten Ni₃S₂-FeS-Cu₂S mattes and their pseudo-binary boundary systems are predicted based on Butler's original treatment with great attention to the model parameter β. The predicted results also agree with the experimental data. Therefore, the resulting iso-surface tension curves in molten Ni₃S₂-FeS-Cu₂S mattes at 1473K, especially calculated by using Kohler, Toop and Chou models, are generally acceptable.     

Simulation and fabrication of piezoresistive membrane type MEMS strain sensors

Two piezoresistive (n-polysilicon) strain sensors on a thin Si₃N₄/SiO₂ membrane with improved sensitivity were successfully fabricated by using MEMS technology. The primary difference between the two designs was the number of strips of the polysilicon patterns. For each design, a doped n-polysilicon sensing element was patterned over a thin 3 μm Si₃N₄/SiO₂ membrane. A 1000×1000 μm² window in the silicon wafer was etched to free the thin membrane from the silicon wafer. The intent of this design was to fabricate a flexible MEMS strain sensor similar in function to a commercial metal foil strain gage. A finite element model of this geometry indicates that strains in the membrane will be higher than strains in the surrounding silicon. The values of nominal resistance of the single strip sensor and the multi-strip sensor were 4.6 and 8.6 kΩ, respectively. To evaluate thermal stability and sensing characteristics, the temperature coefficient of resistance [TCR=(ΔR/R₀)/ΔT] and the gage factor [GF=(ΔR/R₀)/] for each design were evaluated. The sensors were heated on a hot plate to measure the TCR. The sensors were embedded in a vinyl ester epoxy plate to determine the sensor sensitivity. The TCR was 7.5×10⁻⁴ and 9.5×10⁻⁴/°C for the single strip and the multi-strip pattern sensors. The gage factor was as high as 15 (bending) and 13 (tension) for the single strip sensor, and 4 (bending) and 21 (tension) for the multi-strip sensor. The sensitivity of these MEMS sensors is much higher than the sensitivity of commercial metal foil strain gages and strain gage alloys.     

氰戊菊酯剂型加工研究进展

综述了近年来氰戊菊酯剂型加工研究进展，重点介绍了其混合制剂的发展情况。     

A Piecewise Grey System Model for Study the Effects of Anthropogenic Activities on Karst Hydrological Processes

Sustainable groundwater development must rely on a good understanding of hydrological processes, especially under effects of anthropogenic activities. This paper develops a piecewise analysis based on grey system model for study effects of anthropogenic activities on hydrological processes. The time series of precipitation and spring discharge were segmented into three time periods depending on whether variations are due to climate variation: the predevelopment stage, the transition stage, and the new equilibrium stage. Then we modeled hydrological process of the predevelopment stage and new equilibrium stage by the grey system model. By comparing the model results, we can quantify the effects of human activities on hydrological processes. We applied the model to Liulin Springs China. The results indicated that the hydraulic response time of the spring discharge to precipitation from the predevelopment stage to the new equilibrium stage, ranges from less than 1 year to up to 4 years. The results revealed that human activities slow the groundwater flow. GM (1,N) models of Liulin Springs discharge showed that the driving coefficients of precipitation to the spring discharge decreased from 0.012272 in the predevelopment stage to 0.007753 in the new equilibrium stage, which means that groundwater recharge ability has reduced about 36.82 %. Human activities in Liulin Springs have drastically changed the groundwater system. Piecewise grey system model is a robust method for hydrological process simulation.     

Preface

Recently, there has been a dramatic increase in research on data mining on social networks and social media. Theubiquitous nature of Web-enabled devices, including desktops,     

复合催化法合成对硫磷

研究了以三甲胺作亲核催化剂、季铵盐A作相转移催化剂、水和极性有机溶剂B作双溶剂、亲核—相转移复合催化法合成对硫磷的方法,收率可达99％。