Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.     

Electrocatalytic properties of NDGA and NDGA/FAD hybrid film modified electrodes for NADH/NAD redox reaction

The fabrication of monolayers composed of nordihydroguaiaretic acid (NDGA), and hybrid films composed of NDGA-flavin adenine dinucleotide (FAD) adsorbed films was performed in neutral aqueous solutions to produce electrochemically active thin films exhibiting one and two redox couples, respectively. An electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of the NDGA and hybrid NDGA/FAD film monolayers. The NDGA modified film electrocatalytically oxidized NADH, ascorbic acid, dopamine, and N₂H₄ in neutral aqueous solutions. Well-separated voltammetric peaks were observed for dopamine and uric acid mixtures, and also for ascorbic acid and uric acid mixtures using the NDGA/GC modified electrode. When transferred to various aqueous buffered solutions, the two redox couples of the NDGA/FAD hybrid film and their formal potentials were observed to be pH-dependent. The electrocatalytic oxidation and reduction of NADH and NAD⁺ by a NDGA/FAD hybrid film in neutral aqueous solutions was carried out, and the electrocatalytic oxidation of NADH was performed using a NDGA/FAD hybrid film.     

PPS的共混改性

简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。着重讨论了PPS PA66、PPS PC、PPS PPO等的共混及其性能。此外,展望了PPS合金的发展前景。     

溴虫腈土壤和甘蓝微量残留量的气相色谱法测定

采用气相色谱法定量分析溴虫腈土壤和甘蓝微量残留量。样品经丙酮提取 ,液 液分配及氧化铝柱层析法净化后 ,以GC ECD测定 ,DB 170 1毛细管柱 ,氮气为载气 ,柱温 2 6 0℃ ,汽化室温度 2 5 0℃ ,检测器温度 2 80℃ ,外标法定量。该方法快速、准确 ,在 0 0 1～ 2 0 0mg/L范围内线性相关系数r2 =0 9999,平均回收率 90 0 %～ 10 3 6 7% ,变异系数 4 4 8%～ 5 89% ,最小检测量 2× 10 12 g ,最低检出浓度 3 3× 10 4mg/kg。     

腐植酸类液体肥料生产技术和产品质量中的几个问题

本文通过胶体化学基本原理和实验数据，对水剂型腐植酸类液体肥料的组分、性质、浓度、流动性、稳定性、抗絮凝性等若干技术和质量问题进行了探讨，并提出一些改进建议。     

钴钼系耐硫变换催化剂硫化与水解问题探讨

钴钼系耐硫变换催化剂硫化与水解问题一直受到人们的关注。许多研究人员对硫化水解做了大量的报道，但都以热力学平衡为基础，计算出的结果存在理论和实际相背离。因此，作者想从化学平衡和动力学双重角度对硫化与水解问题做一探讨。     

煤的荧光特性与其工艺性能的关系研究

简述了煤中镜质组荧光产生的机理及荧光参数的测量方法,通过测定一系列煤的粘结性和10kg小焦炉结焦性试验,探讨了煤的荧光特性与其工艺性能的关系。煤的荧光参数与其反射率呈正的线性相关关系,与其挥发分含量呈负的线性相关关系;煤的粘结性、结焦性均与其荧光参数有关;当煤化程度相同、煤岩组成基本相同时,煤的荧光强度愈强,其结焦性能愈好。     

发酵工厂中空气净化工艺的合理选择

从节能、降低成本、优化工艺的角度，对无菌空气制备过程中，空气预处理流程的选择、空气净化设备、过滤介质以及设备的遴选进行探讨，以实现工艺和工程设计的优化结合。     

High temperature polymerization of propylene catalyzed by MgCl2‐supported Ziegler–Natta catalyst with various cocatalysts

Four cocatalysts, referred to as ethylaluminoxanes, were synthesized by the reaction between triethylaluminium (AIEt₃) and water under various molar ratios of H₂O/Al at ?78°C. Aluminoxanes were used as cocatalysts for a MgCl₂‐supported Ziegler–Natta catalyst for propylene polymerization at temperatures ranging from 70 to 100°C. When the polymerization was activated by AlEt₃, the activity as well as the molecular weight and isotacticity of the resulting polymer gradually dropped as the temperature varied from 70 to 100°C. When ethylaluminoxane was employed as the cocatalyst, good activity and high molecular weight and isotacticity were obtained at 100°C. Furthermore, when the cocatalyst varied from AlEt₃ to ethylaluminoxane, the atactic fraction and polymer fraction with moderate isotacticity decreased and the high isotactic fraction slightly increased, which indicated that the variation of the cocatalyst significantly affects the isospecificity of active sites. It was suggested that the reactivity of the Al‐Et group and the size of the cocatalyst were correlated to the performance of the Ziegler–Natta catalyst at different temperatures. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1978–1982, 2006     

FT-IR spectroscopic study of hydrogen bonding in PA6/clay nanocomposites

Fourier transform infrared spectroscopy was used to investigate PA6/clay nanocomposites (PA6CN) with various cooling histories from the melt, including rapid cooling (water-quenched), middle-rate cooling (air-cooling) and slow cooling (mold-cooling). In contrast to pure PA6 dominated by the α-phase, the addition of clay silicate layers favor the formation of the γ-crystalline phase in PA6CN.We focus on the reason why silicate layers favor the formation of γ-phase in PA6. Vaia et al. suggested that the addition of clay layers forces the amide groups of PA6 out of the plane formed by the chains. This results in conformational changes of the chains, which limits the formation of H-bonded sheets so that the γ-phase is favored. If this assumption is correct, PA6CN is expected to show some differences as compared with PA6 with respect to hydrogen bonding.The silicate layers were indeed found to weaken the hydrogen bonding both in the α- and γ-phases. This was also confirmed by X-ray diffraction studies. The γ-phase is most likely concentrated in regions close to the silicate layers, whereas the α-phase is favored in the bulk matrix.