Vilsmeier–Haack–Arnold formylations of aliphatic substrates with N-chloromethylene-N,N-dimethylammonium salts

The classical electrophilic substitution of activated aromatics with the Vilsmeier–Haack reagent N-chloromethylen-N,N-dimethylammonium chloride (Schemes 1 and 2) has been more recently extended to a great variety of aliphatic substrates, mainly due to the work of Arnold. In this review, a collection of representative examples for these henceforth called Vilsmeier–Haack–Arnold (VHA) formylation reaction of aliphatics is given: the reaction of polymethine cyanines, merocyanines, and other vinylogous iminium salts with the VHA reagent gives, after hydrolysis of the primary substitution products, trialdehydes such as triformylmethane (Scheme 3); VHA reaction with ene-diamines and diene-diamines yields N,N-dialkylaminomalonaldehydes and tetraaldehydes such as 1,1,2,2-tetraformylethane, respectively (Schemes 4 and 5); aldehyde acetals, enol ethers, and carboxylic acids deliver with VHA reagents 2-substituted malonaldehydes (Scheme 6), and α-amino acids give derivatives of the unstable aminomalonaldehyde (Scheme 7); alkenes and polyenes react with VHA reagents to give α,β-unsaturated or higher vinylogous aldehydes (Schemes 8 and 9), and alkenes with donor substituents yield alkylidene-malonaldehydes (Scheme 10); enolizable methyl and methylene ketones produce with VHA reagents 3-chlorovinylaldehydes (Scheme 11). Eventually, the VHA reagent can be used for the intermediate preparation of nucleophilic amino-chlorocarbenes (Scheme 12).     

The determination of protein content of milk, cheese, and meat with the use of the biuret reaction]

A review is given of the different composition of biuret test solutions and experiments with the estimation of protein content of milk, cheese and meat by means of the biuret method are reported. The pure protein and the casein content of skimmed milk and the protein content of whole milk could be determined with biuret test solutions containing potassium hydroxide and a detergent. The use of the biuret method is advantageous in the case of cheese and meat, which are dissolved in potash lye or alkaline detergent solutions. Disturbances of the biuret method caused by lactose, fat or turbidity were eliminated after addition of hydrogen peroxide, by means of extraction or of additional measurements with a copper-free, zinc-containing biuret reagent. Deviations of the color intensity of biuret complexes were compensated by inclusion of standards in the measurement series.     

Introduction to the special issue on IEEE NEWCAS 2017

A contactless detector is presented for evaluating hand tremors caused by exercise-induced fatigue and early Parkinson’s disease. The device consists of a spiral coil, a microcontroller, and an inductive sensor circuitry. Theory shows that the resonant frequency of the circuitry increases when the distance between the hand and the spiral coil decreases, thus small variations of distance from tremor can be detected from the changes of resonant frequencies. A mechanical hand was built for experiments to simulate human hand tremors with repeatability at a fixed frequency. The magnitudes and frequencies of the tremors in the mechanical hand were quantitatively identified using the inductive sensor. Hence, feasibility and accuracy of the contactless hand tremor detector were determined. A triaxial accelerometer was used for comparison. By comparing spectral distributions and magnitudes of the tremors, the inductive sensor performed better than the accelerometer. The detector was applied to evaluate actual hand tremors of three subjects who had undergone exercise to induce tremors. The tremor waveform amplitudes of the subjects were quantitatively analyzed by the standard deviations method. The increased signal energies of exercise-induced tremor within 8–12 Hz were confirmed. Then, a subject with early Parkinson’s disease was evaluated by the proposed hand tremor detector. The tremor magnitudes and frequencies of the patient hand were quantitatively identified within in 4–7 Hz. Therefore, the new contactless hand tremor detector can be developed as a clinical instrument for monitoring the fatigue symptoms of post-exercise and diagnosing the early Parkinson’s disease.     

NaTaO3 composite ceramics - A new thermoelectric material for energy generation

Increasing energy demand requires the energy harvesting of any dispersed energy in combustion machines, nuclear, geothermal, photovoltaic or solar-thermal devices by thermoelectric materials. NaTaO₃ composite material is suggested in this paper for the first time as such material with reasonable high figure-of-merit in the temperature range from 750 to 1273 K. While pure NaTaO₃ with perovskite crystal structure is an insulator, ceramic NaTaO₃-Fe₂O₃ (n-type) and NaTaO₃-Ag (p-type) composites in mixtures around 30 mol.% are semiconductors with Seebeck coefficients of −250 and 70 mV/K as measured in a self-built device even under closed circuit condtions. The electric conductivity for the n-type material increases from 0.02 mS/m at 773 K to 200 mS/m at 1273 K leading to a power factor of ZT > 4.5 * 10⁻⁶ at 900 K and ΔT = 500 K. This material was found by ab initio calculations using the VASP program. The reason for the high Seebeck coefficient is the large effective mass of NaTaO₃ m^*/m₀ = 12, the main factor determining the thermoelectric performance. It is also confirmed, that Fe atoms as dopants enter the Ta-site of NaTaO₃, up to 8 at.%, and reduces the bandgap.     

Playing chess unconsciously.

Expertise in a certain stimulus domain enhances perceptual capabilities. In the present article, the authors investigate whether expertise improves perceptual processing to an extent that allows complex visual stimuli to bias behavior unconsciously. Expert chess players judged whether a target chess configuration entailed a checking configuration. These displays were preceded by masked prime configurations that either represented a checking or a nonchecking configuration. Chess experts, but not novice chess players, revealed a subliminal response priming effect, that is, faster responding when prime and target displays were congruent (both checking or both nonchecking) rather than incongruent. Priming generalized to displays that were not used as targets, ruling out simple repetition priming effects. Thus, chess experts were able to judge unconsciously presented chess configurations as checking or nonchecking. A 2nd experiment demonstrated that experts' priming does not occur for simpler but uncommon chess configurations. The authors conclude that long-term practice prompts the acquisition of visual memories of chess configurations with integrated form-location conjunctions. These perceptual chunks enable complex visual processing outside of conscious awareness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Oxidation of Silicon Carbide Fibers During Static Fatigue in Air at Intermediate Temperatures

The static fatigue of SiC-based fiber bundles and single fibers has been examined in previous papers, with emphasis placed on the analysis of the stress–rupture time data, and on the modelling of delayed failure from slow crack growth. The present paper investigates the oxidation of the fibers during static fatigue, at temperatures in the intermediate temperature range (500°–800°C). Two oxidation-induced phenomena have been evidenced: the formation of a thin silica film at the surface of fibers and the delayed failure of fiber bundles and single filaments. The stress–rupture time data are interpreted with respect to the chemical and structural characteristics of fibers, and to the oxide film growth rate. The structural analysis of the fibers was carried out using scanning electron microscopy and Auger electron spectroscopy. Delayed failure was found to result from slow crack propagation from surface defects, as a result of the consumption of the free carbon at grain boundaries and the local stresses induced by the SiC→SiO₂ transformation at the crack tip. The respective contributions of these phenomena to static fatigue are discussed.     

Monitoring kidney and renal cyst volumes applying MR approaches on a rapamycin treated mouse model of ADPKD

Object  The aim of our study was to determine total cystic volume in a mouse model of PKD using MR imaging to monitor therapeutic effects in vivo. Materials and methods  We imaged eight female pcy-mice in two groups: four belonged to an untreated control group and four were treated with the anticystic agent rapamycin, which has proven to be effective in reducing cystogenesis in animal models. The mice were imaged using a 9.4 Tesla animal scanner. MRI measurements were taken at six time points during the therapy. Total renal volumes and total cyst volumes were calculated using a thresholding approach. Results  During the course of the treatment, the total cyst volume increased significantly faster than the total renal volume in the untreated group, indicating that growth of the total renal volume in the untreated group was primarily due to the growth of the cysts, rather than the parenchyma. The measured total renal volume in the control (placebo) group was significantly higher than the volume in the treated group. Conclusion  Using MRI, we were able to monitor the cystic volume in a mouse model of PKD to assess the therapeutic effect of anticystic treatment.