Dynamic diamond anvil cell (dDAC): a novel device for studying the dynamic-pressure properties of materials

We have developed a unique device, a dynamic diamond anvil cell (dDAC), which repetitively applies a time-dependent load/pressure profile to a sample. This capability allows studies of the kinetics of phase transitions and metastable phases at compression (strain) rates of up to 500 GPa/s (approximately 0.16 s(-1) for a metal). Our approach adapts electromechanical piezoelectric actuators to a conventional diamond anvil cell design, which enables precise specification and control of a time-dependent applied load/pressure. Existing DAC instrumentation and experimental techniques are easily adapted to the dDAC to measure the properties of a sample under the varying load/pressure conditions. This capability addresses the sparsely studied regime of dynamic phenomena between static research (diamond anvil cells and large volume presses) and dynamic shock-driven experiments (gas guns, explosive, and laser shock). We present an overview of a variety of experimental measurements that can be made with this device.     

Bicycle messengers: energy expenditure and exposure to air pollution

The purpose of the study was to determine the level of energy expenditure and exposure to air pollution for bicycle messengers. Relationships between heart rate (HR) and oxygen uptake, and between HR and pulmonary ventilation (VE) for each participant were established in laboratory tests. Air pollution and HR were measured during one working day. The total oxygen uptake was then described as the total energy expenditure in Joule (J) and in multiples of the energy expenditure at rest (MET). The mean energy expenditure during a working day (8 h) was 12 MJ, (4.8 MET). The level of air pollution exposure when cycling seemed to be comparable with the levels of exposure when sitting inside a vehicle. The VE during cycling was four times higher than resting value. Increased VE led to increased exposure to air pollution.     

Flood Risk Management in Flanders: Past Developments and Future Challenges

This paper presents the state of the art of flood risk management in Flanders, a low-lying region in the northern part of Belgium which is vulnerable to flooding. Possible flood hazard sources are not only the many rivers which pass through the Flemish inland, but also the North Sea, which is sensitive to the predicted sea level rise and which can affect large parts of the Flemish coastal area. Due to the expected increase in flood risks in the 21st century, the Flemish government has changed its flood management strategy from a flood control approach to a risk-based approach. Instead of focusing on protection against a certain water level, the objective now is to assure protection against the consequences of a flood, while considering its probability. In the first part, attention is given to the reasoning and functioning of the risk-based approach. Recent improvements to the approach are discussed, as well as the GIS-implementation of the entire model. The functioning of the approach is subsequently demonstrated in two case studies. The second part of the paper discusses future challenges for the flood risk management in Flanders. The driving force behind these challenges is the European Directive on the assessment and management of flood risks, which entered into force in 2007. The Flemish implementation of the directive is discussed and situated in the European landscape. Finally, attention is given to the communication of flood risks to the general public, since the “availability” of flood risk management plans is among the requirements of the EU Floods Directive.     

Mining frequent conjunctive queries in relational databases through dependency discovery

We present an approach for mining frequent conjunctive in arbitrary relational databases. Our pattern class is the simple, but appealing subclass of simple conjunctive queries. Our algorithm, called Conqueror $^+$ , is capable of detecting previously unknown functional and inclusion dependencies that hold on the database relations as well as on joins of relations. These newly detected dependencies are then used to prune redundant queries. We propose an efficient database-oriented implementation of our algorithm using SQL and provide several promising experimental results.     

Fracture Assessment of Carbon Fibre/Epoxy Reinforcing Rings through a Combination of Full-Scale Testing, Small-Scale Testing and Stress Modeling

Carbon fibre/epoxy rings are used as radial reinforcement for polymer bearing elements with nominal diameter 250 mm functioning under 150 MPa. Full-scale static and dynamic testing revealed no catastrophic failure for loading to 400 MPa, although there was circumferential splitting of carbon fibres at the machined top edge causing counterface wear under sliding. A combined numerical–experimental analysis was applied for design improvement with a representative small-scale qualification test on the real ring geometry, inducing additional stress concentrations compared to ASTM standards. Full-scale modelling revealed high radial–axial shear stresses (33 MPa) in non-hydrostatically loaded zones, while it increased towards 104 MPa under hydrostatic load conditions. The former is the most critical and should be simulated either on a small-scale unidirectional compression test or on a representative short beam shear test, respectively, measuring the radial–axial or radial–tangential shear strength. A relation between both small-scale states of stress was experimentally and numerically studied, experiencing that the composite ring has lower radial–tangential shear stress compared to radial–axial shear stress as a different hydrostatic stress state is observed in the bulk of the composite ring. As a compressive test is however more difficult to perform than a short-beam-shear test, a representative design criterion for shear fracture is determined from failure at 27 kN normal load in a short-beam-shear test. Finally, fracture is avoided by optimising the cross-sectional geometry of the composite reinforcing ring and close control of the processing parameters.     

On Forward–Backward MODE for Array Signal Processing

We apply the MODE (method of direction estimation) principle to the forward–backward (FB) covariance of the output vector of a sensor array to obtain what we call the FB-MODE procedure. The derivation of FB-MODE is an interesting exercise in matrix analysis, the outcome of which was somewhat unexpected: FB-MODE simply consists of applying the standard MODE approach to the eigenelements of the FB sample covariance matrix. By using an asymptotic expansion technique we also establish the surprising result that FB-MODE is outperformed, from a statistical standpoint, by the standard MODE applied to the forward-only sample covariance (F-MODE). We believe this to be an important result that shows that the FB approach, which proved quite useful for improving the performance of many suboptimal array processing methods, shouldnotbe used with a statistically optimal method such as F-MODE.     

Physical Characterization of Anhydrous and Hydrous Forms of the Hydrochloride Salt of BVT.5182 A Novel 5-HT6 Receptor Antagonist

ABSTRACT

The physicochemical properties of 1-benzenesulfonyl-4-(piperazin-1-yl)-indole hydrochloride, a novel 5-HT₆ receptor antagonist for the treatment of obesity were characterized. Two solid state forms were identified at ambient conditions (23°C): an anhydrate form (1) and a hydrate form (2), with 1.5 moles of H₂O. The latter easily dehydrates and rehydrates without affecting the crystal morphology. Investigations of the propensity for interconversion between the two forms reveal that a) conversion of 2→1 takes place above 145°C and that b) conversion of 1→2 only occurs after crystallization from supersaturated aqueous solutions at a water activity ≥0.94 or in the presence of comparable amounts of crystals of 2 in water at ambient conditions. However, in an equimolar suspension of 1 and 2 at 37°C no phase transformation was observed. Thus, the difference in chemical potential between the two forms is small. Form 1 was shown to have overall favorable solid state properties and, hence, considered the preferred form for continued pharmaceutical development. The characterization was performed by means of light microscopy, scanning electron microscopy, powder X-ray diffraction, FTIR/NIR-spectroscopy, differential scanning calorimetry, hot stage microscopy, thermogravimetry, dynamic vapor sorption, Karl Fischer water content determination, phase stability studies of suspensions, solubility, and intrinsic dissolution rate measurements.     

Parameterized Two-Player Nash Equilibrium

We study the problem of computing Nash equilibria in a two-player normal form (bimatrix) game from the perspective of parameterized complexity. Recent results proved hardness for a number of variants, when parameterized by the support size. We complement those results, by identifying three cases in which the problem becomes fixed-parameter tractable. Our results are based on a graph-theoretic representation of a bimatrix game, and on applying graph-theoretic tools on this representation.     

Thermodiffusion‐Assisted Pyroelectrics—Enabling Rapid and Stable Heat and Radiation Sensing

Sensors for monitoring temperature, heat flux, and thermal radiation are essential for applications such as electronic skin. While pyroelectric and thermoelectric effects are suitable candidates as functional elements in such devices, both concepts show individual drawbacks in terms of zero equilibrium signals for pyroelectric materials and small or slow response of thermoelectric materials. Here, these drawbacks are overcome by introducing the concept of thermodiffusion‐assisted pyroelectrics, which combines and enhances the performance of pyroelectric and ionic thermoelectric materials. The presented integrated concept provides both rapid initial response upon heating and stable synergistically enhanced signals upon prolonged exposure to heat stimuli. Likewise, incorporation of plasmonic metasurfaces enables the concept to provide both rapid and stable signals for radiation‐induced heating. The performance of the concept and its working mechanism can be explained by ion–electron interactions at the interface between the pyroelectric and ionic thermoelectric materials.     

Breaking the ice: a work domain analysis of icebreaker operations

Cognition, Technology & Work - Icebreakers are special-purpose ships designed to operate in different ice-covered waters, either independently or during assistance of weaker ships. In the...