Autothermal two-stage gasification of low-density waste-derived fuels

In order to increase the efficiency of waste utilization in thermal conversion processes, pre-treatment is advantageous. With the Herhof Stabilat^® process, residual domestic waste is upgraded to waste-derived fuel by means of biological drying and mechanical separation of inerts and metals. The dried and homogenized waste-derived Stabilat^® fuel has a relatively high calorific value and contains high volatile matter which makes it suitable for gasification. As a result of extensive mechanical treatment, the Stabilat^® produced is of a fluffy appearance with a low density. A two-stage gasifier, based on a parallel-arranged bubbling fluidized bed and a fixed bed reactor, has been developed to convert Stabilat^® into hydrogen-rich product gas. This paper focuses on the design and construction of the configured laboratory-scale gasifier and experience with its operation. The processing of low-density fluffy waste-derived fuel using small-scale equipment demands special technical solutions for the core components as well as for the peripheral equipment. These are discussed here. The operating results of Stabilat^® gasification are also presented.     

Patent information in a large electrical company, exemplified by the situation at Siemens

The special situation of patent information is dealt with against the background of the general problems of information provision. The role of the Patent Department of Siemens as a user of patent information and in the distribution of patent information within the company is discussed. Finally, the present system of current patent information on granted patents and first publications is outlined and an outlook on future developments given.     

Design aspects of MOS-controlled thyristor elements: technology,simulation, and experimental results

2.5-kV thyristor devices have been fabricated with integrated MOS controlled n⁺-emitter shorts and a bipolar turn-on gate using a p-channel DMOS technology. Square-cell geometries with pitch variations ranging from 15 to 30 μm were implemented in one- and two-dimensional arrays with up to 20000 units. The impact of the cell pitch on the turn-off performance and the on-state voltage was studied for arrays with constant cathode area as well as for single-cell structures. By realizing MOS components with submicrometer channel lengths, scaled single cells are shown to turn off with current densities of several kiloamperes per square centimeter at a gate bias of 5 V. In the case of multi-cell ensembles, turn-off performance is limited due to inhomogeneous current distribution. Critical process parameters as well as the device behavior were optimized through multidimensional numerical simulation     

FODA — the formal specification of ODA document structures and its use as a basis for conformance testing

The Office Document Architecture (ODA) is an International Standard which is developed by TC 97/sc 18 of the International Organization for Standardization (ISO) in close collaboration with CCITT's Study Group VIII and with ECMA. This paper describes the current state of a formal specification of the ODA document structures by mathematical means and its use for conformance specification and conformance testing.     

Near-wall porosity characteristics of fixed beds packed with wood chips

Packed beds of fuel wood chips are commonly found in thermal conversion processes such as combustion or gasification. Wood chips in particular are mostly used as fuel for small-scale domestic heating boilers but also for commercial-scale combustion units. The characterization of spatial voidage distribution inside the wood chip beds is of great importance for flow and reactor modelling. This study focuses on the radial porosity variations of cylindrical beds of three different types of commercially available wood chips including chips classified as G30 size class. The conventional technique of consolidating packed beds with a resin was chosen as the experimental procedure. The radial voidage distribution in different cylindrical beds is determined by image analysis of sections of the solidified packings. Additionally, a packing of monosized spheres was investigated in order to assess the selected procedure in comparison with widely available literature data for spheres. The results are discussed and summarized in a mathematical expression correlating the radial voidage distribution depending on average wood chip size, packing core porosity and dimensionless distance from the tube wall.