Toughness optimization of elastomer‐modified glass–fiber reinforced PA6 materials

To investigate the influence of moisture and EPR‐g‐MA content on the fracture behavior of glass–fiber reinforced PA6 materials, brittle‐to‐tough transition temperatures (T_btt) were determined. Water absorption was taken into account by conditioning the analyzed materials. Tensile tests could reveal the temperature range of the largest moisture dependence of mechanical properties between 10 and 50°C. J‐integral values were used to describe the fracture behavior under conditions of impact load as a function of temperature. The brittle‐to‐tough transition of reinforced polyamides was found to be less approximate than in unreinforced materials. Two different characteristic temperature points T_s and T_e were identified, which were the intercept between elastic and elastic–plastic deformation on the one hand and the starting point of dominating stable crack propagation with strong plastic deformation on the other hand. Characteristic brittle‐to‐tough transition temperatures T_btt could be calculated as the arithmetic average of these two points. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Dielectric relaxation studies of low thermal expansion polymer composites

The results of temperature‐dependent dielectric and rheological measurements are reported on polymer‐ceramic composite films, poly(methyl methacrylate) (PMMA) : lead titanate (PbTiO₃). Analyses of relaxational processes of the PMMA host matrix have been investigated using temperature‐dependent dielectric and rheological measurements. It is found that the α‐relaxation is more significantly affected by the addition of filler in comparison to β‐relaxation. The composite films are found to have much lower dielectric constants in comparison to the pure ceramic material. Suitable models have been used to explain the observed dielectric constant of the composite films. Using rheological measurements, occurrence of reinforcement in these composite films due to the addition of ceramic filler has also been observed and the results are discussed in the article. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Modulation of Aphid Alarm Pheromone Emission of Pea Aphid Prey by Predators

Recent studies on animal alarm signaling have shown that alarm calls generally are not uniform, but may vary depending on the type and intensity of threat. While alarm call variability has been studied intensively in birds and mammals, little is known about such variation in insects. We investigated variability in alarm signaling in aphids, group-living insect herbivores. Under attack, aphids release droplets containing a volatile alarm pheromone, (E)-β-farnesene (EBF), that induces specific escape behavior in conspecifics. We used a handheld gas chromatograph (zNose?), which allows real-time volatile analysis, to measure EBF emission by pea aphids, Acyrthosiphon pisum, under attack from different predators, lacewing or ladybird larvae. We demonstrate that aphid alarm signaling is affected by the predator species attacking. Ladybirds generally elicited smaller EBF emission peaks and consumed aphids more quickly, resulting in lower total EBF emission compared to lacewing attacks. In 52 % of the replicates with lacewings and 23 % with ladybirds, no EBF was detectable in the headspace, although aphids secreted cornicle droplets after attack. We, therefore, examined EBF amounts contained in these droplets and the aphid body. While all aphid bodies always contained EBF, many secreted droplets did not. Our experiments show that alarm signaling in insects can be variable, and both the attacker as well as the attacked may affect alarm signal variation. While underlying mechanisms of such variation in aphid-predator interactions need to be investigated in more detail, we argue that at least part of this variation may be adaptive for the predator and the aphid.     

Process Engineering Considerations of Electrochemical Storage

Thermodynamically, electric storages can be generally characterized as a type of regenerative machines able to operate in a work and a power machine mode. A consideration of the concentration term of the Nernst equation already shows a first principal difference between batch and flow processes, because the reaction coordinate depends on time for batch processes and on the flow coordinate for flow processes. Ionic substances may be stored within a volume surrounding the electrodes or on the surface of the electrodes itself. The volume concentrations of the reactants are thus a determining parameter of electrochemical storage beside voltage and the ratio of released electrons per reacting reference substance. Surface storage allows only batch processes while volume storage allows batch and flow processes. This characterization identifies the benefits of certain reactions regarding mass and volume related energy density in a simple way at a very early stage of development. It also allows a simple calculation of possible discharging times.     

Photovoltaic textile structure using polyaniline/carbon nanotube composite materials

In this paper, an investigation of flexible electrodes for photovoltaic textile structures utilizing polymer‐based organic materials is presented. The composite structure consisting of a blend of water dispersible carbon nanotube:polyaniline (CNT:PANI) components with poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was applied to be used as the hole collecting electrode in photovoltaic textile applications. Both photovoltaic textiles and conventional solar cells were fabricated by using a blend of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT):(6,6)‐phenyl C61‐butyric acid methyl ester (PCBM). All devices were characterized by measuring current versus voltage characteristics under AM 1.5 conditions. The nanoscale morphology of the photovoltaic structures was investigated using scanning electron microscopy and atomic force microscopy.     

Development of Electrical Discharge Machinable ZTA Ceramics with 24 vol% of TiC,TiN, TiCN,TiB2 and WC as Electrically Conductive Phase

In order to develop ED‐machinable ceramics with high strength, toughness and wear resistance, ZTA was chosen as matrix material. A dispersion of 24 vol% electrically conductive phase (TiC, TiN, TiCN, TiB₂ and WC) was added. These composites were hot pressed for 1 h at 60 MPa and temperatures ranging from 1475°C to 1550°C. Mechanical and electrical properties were investigated. The influence of the electrically conductive phase on the surface quality after EDM was analyzed. The mechanical properties and machining quality were found to depend significantly on the type of conductive phase added. Machining of a complex shaped ZTA‐TiC component was demonstrated.