Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Optimizing Financial Engineering Time Indicator Using Bionics Computation Algorithm and Neural Network Deep Learning

Computational Economics - The present work aims to optimize the time index of financial engineering to improve the efficiency of financial decision-making. A Back Propagation Neural Network (BPNN)...     

热处理非晶态Ni-P合金镀层的晶化过程

运用电沉积的方法在45钢基体上制备Ni-P合金镀层,使用差示扫描量热法(DSC)和热重法(TG)分析非晶态NiP合金镀层在20℃/min加热速率下的热效应和质量变化。在300℃和400℃分别对镀层进行0,15,30,45,60,75min的热处理,采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计对镀层进行表征。结果表明:Ni-P合金镀层在加热过程中的放热峰出现在284.8℃处,镀层的质量和元素组成稳定;晶化过程经历了非晶态、亚稳态NiP和Ni5P2、稳定态Ni3P的转变;经过热处理后,镀层的显微硬度显著提高,最大值达1036.56HV,约为镀态的2倍;热处理态镀层的耐NaCl溶液腐蚀性能比镀态有所下降,但两者都比45钢基体好。     

小河嘴水电站增效扩容改造电气设备分析

小河嘴水电站已运行四十多年,设备老化,故障多,自动化水平低,对该站进行增效扩容改造是必要的,而且也是可行的。     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

生态课堂教学模式在VB程序设计的应用初探

本文运用生态学的理论和方法研究VB程序设计课堂中存在的问题,从多个角度对VB课堂进行深入探讨,力求从生态学的视角解读VB程序设计课堂,揭示其课堂中的失衡现象,进而构建VB程序设计生态课堂,将生态平衡的理念融入VB程序设计课堂教学中。     

媒体舆论引导仿真

使用multi-Agent的建模思想,以现实为基础建立了一个舆论涌现的仿真模型.该模型主要由个体和媒体以及它们之间的规则组成.个体的属性包括了个体之间的信任度、个体观点的可信度和个体的从众性;媒体的属性包括媒体的影响范围和权威度.规则包括个体交互规则和个体与媒体的交互规则.通过仿真证明了模型是合理的,并且用该模型来仿真媒体对舆论演化的引导作用,从媒体的数量和报道频率2个方面研究媒体在舆论形成过程中的引导作用,结果发现积极媒体的数量越多对舆论的引导作用越强,媒体的报道频率增加会对舆论的形成产生积极效果,但是超过一定次数时对舆论的影响作用有限.最后通过对模拟结果的分析,提出了通过媒体来引导舆论的方式.     

SIFT在行星表面探测器视觉导航系统中的应用

介绍了行星探测器自主导航系统的相关背景,讨论了行星探测器自主视觉导航系统算法的主要目的和传感器信息融合的必要性,并就此引入了尺度不变特征变换(SIFT)的相关理论分析.对SIFT方法提出了改进,从而改善了算法的效果.最后给出了三维重建和目标追踪的实验结果.     

基于运动方向预测的快速运动估计算法

利用序列图像的相邻块运动矢量的高度相关性和运动矢量的中心偏移特性,提出一种基于运动方向预测的快速运动估计算法。设计4种方向性模板,根据参考运动矢量预测出图像块的运动情况,根据不同的运动方向选择对应的方向性模板进行搜索。实验结果表明,该算法在速度和准确性方面都优于传统的快速运动估计算法。