短毫米波和亚毫米波接收机的发展现状

本文概述了短毫米和亚毫米波接收机的发展现状，介绍了接收机的重要组成部件：混频器、振荡器和放大器的发展水平以及毫米波单片集成电路的现状，给出了接收机的最新性能指标。     

CALCULATION ON TWO-PHASE FLOW TRANSIENTS AND THEIR EXPERIMENTAL RESEARCH

From basic equations of gas-liquid, solid-liquid, solid-gas two-phase flow, the calculating method on flow transients of two-phase flow is developed by means of characteristic method. As one example, a gas-liquid flow transient is calculated and it agrees well with the experimental result. It is shown that the method is satisfactory for engineering demand.     

内燃机车曲轴中频淬火过程的数值模拟

借助 ANSYS大型有限元分析软件 ,实现了 16 V2 4 0曲轴淬火过程的计算机模拟 ,模拟结果可直观地显示出任一时刻曲轴表面及内部的温度分布、冷却曲线以及淬火结束后的残余应力分布 ,并能预测淬硬层深度。同时对比了轴颈内圆角处进行淬火和不进行淬火两种工艺的效果 ,为现场提供了用虚拟现实方法详尽分析和研究淬火工艺的工具。     

Bright Blue Light—emitting Diodes Based on a Novel Fluorescent Dye Containing Heterocyclic Groups

Novel molecular material ,1-benzothiazoly-3-pheny1-pyrazoline (BTPP) was found to function as bright blue light emitting dye in organic electroluminescent device, and its optical and electric characteristics were investigated. This heterovyclic compound exhibited good characteristics of blue photoluminescence and electroluminescence,which had the emission peak at 450nm .The single layer light-emitting devices using BTPP as light -emitting material dispersed in poly(N-vinylcarbazole)(PVK) and double layer ones using PBD as hole block layer above the light-emitting layer were fabricated using conventional spin-casting and vaccum vapour deposition methods. The introduction of PBD has enhanced electron injection and luminance efficiency, compared with the single layer LEDs.     

纳米二氧化钛的表面修饰与应用的研究进展

介绍了纳米二氧化钛表面修饰的两种主要方法:无机和有机表面包覆,以及进行修饰后的纳米二氧化钛的应用.     

新型处理药剂（EP-110）处理各种重金属离子的实验研究

各行各业生产过程中会产生大量废水,重金属离子污染物是其中的重要控制指标,传统的处理方法不能完全解 决这类污染。本文通过大量的实验数据,对新型的处理药剂(EP-110)处理各种重金属离子的性能做了全面的测试、分析,并 提出了使用方法。     

构皮滩水电站尾水隧洞特大断面软岩开挖支护

构皮滩水电站尾水隧洞软岩不良地质洞段占尾水隧洞全长的70%以上,确保软岩洞段的安全快速开挖是尾水隧洞施工的关键,尤其一次支护的强度对洞室稳定影响极大。为此,施工中根据软岩的地质特点及尾水隧洞开挖的断面尺寸,采取分层开挖和超前锚杆的施工方式和型钢拱架进行一次支护。根据监测结果,围岩变形很小,一次支护效果良好,表明构皮滩水电站尾水隧洞大断面软岩采取的开挖方式和一次支护方式是成功的。     

银川市室内环境空气污染现状及治理措施的初探

本文通过对银川市室内环境空气污染现状的调查与检测,阐述了室内环境空气污染的来源及危害,提出了污染治理措施。     

硅烷交联超高分子量聚乙烯

采用硅烷对超高分子量聚乙烯(UHMWPE)进行交联改性，系统地研究了交联UHMWPE的凝胶率、熔点、结晶度、力学性能与耐磨性。结果表明，硅烷偶联剂导致了UHMWPE的交联，使UHMWPE的凝胶率提高。当硅烷含量较低时，UHMWPE的熔点增高、结晶度增大；当硅烷含量较高时，UHMWPE的熔点、结晶度呈下降的趋势；硅烷交联导致了UHMWPE材料的模量和强度提高，磨耗率降低；当硅烷含量较高时，交联UHMWPE材料的力学性能和磨耗率均变差；当硅烷含量为0．2份～0．4份时，交联UHMWPE材料的综合性能最佳。     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.