Photocuring of cycloaliphatic epoxy formulations using polyesters with multiarm star topology as additives

Multiam star polyesters were synthesized by growing poly(ε‐caprolactone) (PCL) arms from hyperbranched polyesters cores of different molecular weight and used as polymeric modifiers in UV‐curable cationic formulations based on a biscycloaliphatic epoxy resin. The effect of the multiarm stars on the curing kinetics has been investigated by real‐time FTIR. The thermal‐mechanical properties of the photocured thermosets have been studied with calorimetry and dynamomechanical and thermogravimetric analysis. Impact strength tests have been performed to assess their effect on the toughness of the cured materials. An accelerative effect of these modifiers has been observed as a consequence of the participation of the hydroxyl groups of the modifiers in the cationic curing of the epoxy resin. A modest increase in toughness accompanied by a decrease in the glass transition are observed, as a consequence of the incorporation of the modifiers into the network structure, leading to homogeneous, in situ reinforced materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40005.     

Influence of glass fiber content on the morphology and mechanical properties in injection molded polypropylene composites

Propropylene was reinforced with various concentrations of glass fiber (0, 10, 20, 28, and 35 percent by weight) and standard test samples were prepared by injection molding under identical conditions. The influence of fiber concentration on the morphology and mechanical properties was investigated using polarizing microscope, scanning electron microscope, Instron universal testing machine, etc. Tensile strength, tensile modulus, and flexural strength were found to increase with glass fiber content, while impact strength was reduced. These observed changes in mechanical properties were explained in terms of alterations in skin-core morphology, spherulite size, transcrystallinity, etc. The efficiency of reinforcement factor (K) was calculated for all the composites. It was found that K decreases with the increase of fiber concentration. This study attempts to correlate fiber concentration and polymer morphology with mechanical properties and the overall efficiency of reinforcement. This would help in optimizing the fiber content to prepare molded composites with desired mechanical properties.     

Neuropsychopharmacology of Emerging Drugs of Abuse: meta- and para-Halogen-Ring-Substituted α-PVP (“flakka”) Derivatives

Changes in the molecular structure of synthetic cathinones has led to an increase in the number of novel emerging drugs in the illicit drug market at an unprecedented rate. Unfortunately, little is known about the neuropsychopharmacology of recently emerged halogen-substituted α-PVP derivatives. Thus, the aim of this study was to investigate the role of para- and meta-halogen (F-, Cl-, and Br-) substitutions on the in vitro, in silico, and in vivo effects of α-pyrrolidinopentiophenone (α-PVP) derivatives. HEK293 cells expressing the human dopamine or serotonin transporter (hDAT and hSERT) were used for the uptake inhibition and transporter affinity assays. Molecular docking was used to model the interaction mechanism against DAT. Swiss CD-1 mice were used for the horizontal locomotor activity, open field test, and conditioned place preference paradigm. All compounds demonstrated potent DA uptake inhibition and higher DAT selectivity than cocaine. Meta-substituted cathinones showed higher DAT/SERT ratios than their para- analogs, which correlates with an increased psychostimulant effect in vivo and with different meta- and para-in silico interactions at DAT. Moreover, all compounds induced rewarding and acute anxiogenic effects in mice. In conclusion, the present study demonstrates the role of meta- and para-halogen substitutions in the mechanism of action and provides the first evidence of the rewarding and anxiety-like properties of halogenated α-PVP derivatives.     

Seipin Deficiency as a Model of Severe Adipocyte Dysfunction: Lessons from Rodent Models and Teaching for Human Disease

Obesity prevalence is increasing worldwide, leading to cardiometabolic morbidities. Adipocyte dysfunction, impairing white adipose tissue (WAT) expandability and metabolic flexibility, is central in the development of obesity-related metabolic complications. Rare syndromes of lipodystrophy characterized by an extreme paucity of functional adipose tissue should be considered as primary adipocyte dysfunction diseases. Berardinelli-Seip congenital lipodystrophy (BSCL) is the most severe form with a near absence of WAT associated with cardiometabolic complications such as insulin resistance, liver steatosis, dyslipidemia, and cardiomyopathy. Twenty years ago, mutations in the BSCL2 gene have been identified as the cause of BSCL in human. BSCL2 encodes seipin, an endoplasmic reticulum (ER) anchored protein whose function was unknown back then. Studies of seipin knockout mice or rats demonstrated how seipin deficiency leads to severe lipodystrophy and to cardiometabolic complications. At the cellular levels, seipin is organized in multimers that are particularly enriched at ER/lipid droplet and ER/mitochondria contact sites. Seipin deficiency impairs both adipocyte differentiation and mature adipocyte maintenance. Experiments using adipose tissue transplantation in seipin knockout mice and tissue-specific deletion of seipin have provided a large body of evidence that liver steatosis, cardiomyopathy, and renal injury, classical diabetic complications, are all consequences of lipodystrophy. Rare adipocyte dysfunctions such as in BSCL are the key paradigm to unravel the pathways that control adipocyte homeostasis. The knowledge gathered through the study of these pathologies may bring new strategies to maintain and improve adipose tissue expandability.     

Unsteady pressure measurements in a high-speed centrifugal compressor

This paper presents the unsteady data acquisition system used to measure the pressure field in high speed compressors. Details and electronic sketches are given for the conditioners developed in-house that have been used to amplify and to filter the pressure signal with the aim of acquiring data up to 150 kHz. A discussion of the experimental results carried out in a centrifugal compressor is proposed. Through different processing of the pressure signals and a comparison with URANS simulations, the excitation of the pressure transducers by the pressure waves generated by shock waves that occur between the impeller and the diffuser is highlighted. The levels of pressure fluctuations measured when entering into surge are also presented and reveal very repetitive behaviour of the flow instabilities.     

Model‐based control addition to prescribe DFIG wind turbine fast frequency response

This paper investigates the physical capability of double‐fed induction generator (DFIG) wind turbines for inertial support of frequency response. Frequency stability is modeled using the DFIG electromechanical and generator controller dynamics, and a destabilizing effect is demonstrated in low‐inertia systems. To improve response, a synchronous reference frame DFIG controller is proposed that acts by following low‐frequency grid dynamics and adds a fast acting proportional plus integral (PI)‐controlled frequency‐responsive component to existing qd current commands. The proposed controller is derived in a straightforward manner using only the DFIG dynamic equations and is designed using pole/zero placement techniques. Laboratory experiments using a micro‐scale DFIG wind turbine with hub‐emulating flywheel prove better capability for transient frequency regulation even under extreme load change. The result is a DFIG controller that balances the appearance of transients in electrical and mechanical systems. Value is achieved in providing immediate continuous inertial response to support load change. The proposed frequency response can improve the use of existing physical inertia from wind turbines.     

Characterisation by TPR, XRD and NOx Storage Capacity Measurements of the Ageing by Thermal Treatment and SO2 Poisoning of a Pt/Ba/Al NOx-Trap Model Catalyst

The deactivation of a Pt/Ba/Al₂O₃ NO _x -trap model catalyst submitted to SO₂ treatment and/or thermal ageing at 800 °C was studied by H₂ temperature programmed reduction (TPR), X-ray diffraction (XRD) and NO _x storage capacity measurements.The X-ray diffractogram of the fresh sample exhibits peaks characteristic for barium carbonate. Thermal ageing leads to the decomposition of barium carbonate and to the formation of BaAl₂O₄. The TPR profile of the sulphated sample shows the presence of (i) surface aluminium sulphates, (ii) surface barium sulphates, (iii) bulk barium sulphates. The exposure to SO₂ after ageing leads to a small decrease of the surface barium-based sulphates, expected mainly as aluminate barium sulphates. This evolution can be attributed to a sintering of the storage material. TPR experiments also show that thermal treatment at 800 °C after the exposure to SO₂ involves the decomposition of aluminium surface sulphates to give mainly bulk barium sulphates, also pointed out by XRD. Thus, the thermal treatment at 800 °C leads to a stabilization of the sulphates.These results are in accordance with the NO _x storage capacity measurements. On non-sulphated catalysts, the treatment at 800 °C induces to a decrease of the NO _x storage capacity, showing that barium aluminate presents a lower NO _x storage capacity than barium carbonate. Sulphation strongly decreases the NO _x storage capacity of catalysts, whatever the initial thermal treatment, showing that barium sulphates inhibit the NO₂ adsorption. Moreover, the platinum activity for the NO to NO₂ oxidation is lowered by thermal treatments.     

Study of Tire Particle Mixing in a Moving and Stirred Bed Vacuum Pyrolysis Reactor

The paper studies the motion of scrap tire shreds in a moving and stirred bed vacuum pyrolysis reactor. The reactor configuration is a novel concept. The pattern and the residence time distribution (RTD) of the particle motion in the reactor were investigated using tracers, for different feed rates and blade speeds. It was shown that the particle motion in the reactor is plug flow nature with intermediate dispersion (σ² = 0.02—0.055). The mean residence time is in the range of 7—23 min, depending on the speed of the blades and the feed rate. The ratio of mean particle speed and the speed of blades v_m/v_b varied between 0.03 and 0.07.     

Environmental aspects of ethanol-based fuels from Brassica carinata: A case study of second generation ethanol

One of the main challenges faced by mankind in the 21st century is to meet the increasing demand for energy requirements by means of a more sustainable energy supply. In countries that are net fossil fuel importers, expectation about the benefit of using alternative fuels on reducing oil imports is the primary driving force behind efforts to promote its production and use. Spain is scarce in domestic energy sources and more than 50% of the energy used is fossil fuel based. The promotion of renewable energies use is one of the principal vectors in the Spanish energy policy. Selected herbaceous crops such as Brassica carinata are currently under study as potential energy sources. Its biomass can be considered as potential feedstock to ethanol conversion by an enzymatic process due to the characteristics of its composition, rich in cellulose and hemicellulose. This paper aims to analyse the environmental performance of two ethanol-based fuel applications (E10 and E85) in a passenger car (E10 fuel: a mixture of 10% ethanol and 90% gasoline by volume; E85 fuel: a mixture of 85% ethanol and 15% gasoline by volume) as well as their comparison with conventional gasoline as transport fuel. Two types of functional units are applied in this study: ethanol production oriented and travelling distance oriented functional units in order to reflect the availability or not of ethanol supply. E85 seems to be the best alternative when ethanol production based functional unit is considered in terms of greenhouse gas (GHG) emissions and E10 in terms of non-renewable energy resources use. Nevertheless, E85 offers the best environmental performance when travelling distance oriented functional unit is assumed in both impacts. In both functional unit perspectives, the use of ethanol-based fuels reduces the global warming and fossil fuels consumption. However, the contributions to other impact indicators (e.g. acidification, eutrophication and photochemical oxidants formation) were lower for conventional gasoline.Life Cycle Assessment (LCA) procedure helps to identify the key areas in the B. carinata ethanol production life cycle where the researchers and technicians need to work to improve the environmental performance. Technological development could help in lowering both the environmental impact and the prices of the ethanol fuels.     

APOB CRISPR-Cas9 Engineering in Hypobetalipoproteinemia: A Promising Tool for Functional Studies of Novel Variants

Hypobetalipoproteinemia is characterized by LDL-cholesterol and apolipoprotein B (apoB) plasma levels below the fifth percentile for age and sex. Familial hypobetalipoproteinemia (FHBL) is mostly caused by premature termination codons in the APOB gene, a condition associated with fatty liver and steatohepatitis. Nevertheless, many families with a FHBL phenotype carry APOB missense variants of uncertain significance (VUS). We here aimed to develop a proof-of-principle experiment to assess the pathogenicity of VUS using the genome editing of human liver cells. We identified a novel heterozygous APOB-VUS (p.Leu351Arg), in a FHBL family. We generated APOB knock-out (KO) and APOB-p.Leu351Arg knock-in Huh7 cells using CRISPR-Cas9 technology and studied the APOB expression, synthesis and secretion by digital droplet PCR and ELISA quantification. The APOB expression was decreased by 70% in the heterozygous APOB-KO cells and almost abolished in the homozygous-KO cells, with a consistent decrease in apoB production and secretion. The APOB-p.Leu351Arg homozygous cells presented with a 40% decreased APOB expression and undetectable apoB levels in cellular extracts and supernatant. Thus, the p.Leu351Arg affected the apoB secretion, which led us to classify this new variant as likely pathogenic and to set up a hepatic follow-up in this family. Therefore, the functional assessment of APOB-missense variants, using gene-editing technologies, will lead to improvements in the molecular diagnosis of FHBL and the personalized follow-up of these patients.