GaN Nanorods Catalyzed with Mo: Effect of Ammoniating Time on Microstructure,Morphology, and Optical Properties

GaN nanorods have been successfully grown on Si (111) substrates by magnetron sputtering through ammoniating Ga₂O₃ thin films catalyzed with Mo. The influence of the ammoniating time on the growth of GaN nanorods was analyzed, in particular, by X-ray diffraction (XRD), X-ray photoelectron spectroscopy, Fourier transform infrared (FT-IR) spectrometer, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectrum. The results demonstrate that the GaN nanorods are single crystal with hexagonal wurtzite structure, which have high crystalline quality. The GaN nanorods after ammoniation at 1223 K (950 °C) for 20 minutes have good emission properties and the highest crystalline quality with 100- to 200-nm diameter and several-micron length. The growth direction of these nanorods is along the orientation of (100) crystal plane. A small red shift occurs because of the band-gap change caused by the tensile stress of the one-dimensional GaN nanorods along the axial direction.     

Formation cross sections of nuclei with (n,2n) reactions

Ｆｏｒｍａｔｉｏｎｃｒｏｓｓｅｃｔｉｏｎｓｏｆｎｕｃｌｅｉｗｉｔｈ（ｎ，２ｎ）ｒｅａｃｔｉｏｎｓＣｈｅｎＸｕｅＳｈｉ，ＸｉｅＫｕａｎＺｈｏｎｇ，ＺｈｏｕＳｈｅｎｇＭｏ，ＹａｎＱｉｎｇＱｕａｎ（ＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＮｕｃｌｅ...     

压水堆核电厂冷却剂碘同位素活度比值131I/133I与燃料完整性关系研究

压水堆核电厂正常运行期间燃料元件破损会造成一回路裂变产物活度升高,碘同位素活度比值131I/133I是行业内最常用的判断燃料破损情况的指标之一。本文介绍了压水堆正常运行期间冷却剂131I和133I的产生来源和迁移过程,建立模型估算了燃料完整、小破口和大破口情况下131I/133I范围,并通过在运CPR1000型压水堆核电厂的运行监测数据对计算模型进行了验证,两者符合得较好。     

针对裂变产额和半衰期的燃耗计算灵敏度和不确定度分析方法

基于广义微扰理论推导了裂变产额和半衰期的燃耗灵敏度系数理论模型,该模型考虑了原子核密度和中子通量的相互影响,并开发了燃耗计算中有效增殖因数和原子核密度等响应参数对核数据的灵敏度和不确定度分析程序。基于评价核数据中裂变产物独立产额的标准差数据,产生了针对压缩燃耗数据库的裂变产额协方差矩阵,以提高不确定度的计算精度。基于ENDF/B-Ⅶ.1数据库量化了UAM基准题TMI-1栅元无限增殖因数及重要裂变产物和重核的原子核密度由裂变产额和半衰期引入的不确定度。数值结果表明,对于栅元无限增殖因数,裂变产额和半衰期引入的不确定度很小;对于部分裂变产物的原子核密度,裂变产额和半衰期会引入较大的不确定度。     

基于Base64编码的数据加密技术

深入分析了Base64编码的原理，给出了基于动态编码表的Base64编码数据加密方法。     

Impacts of Vegetation on the Intraseasonal Oscillation Simulated by the Community Atmosphere Model (CAM3)

The influences of vegetation on intraseasonal oscillation (ISO) were examined using the Community Atmosphere Model version 3 (CAM3). Two 15-year numerical experiments were completed: the first was performed with a realistic vegetation distribution (VEG run),and the second was identical to the VEG run except without land vegetation (NOVEG run). Generally speaking, CAM3 was able to reproduce the spatial distribution of the ISO, but the ISO intensity in the simulation was much weaker than that observed in nature: the ISO has a relatively much stronger signal. A comparison of the VEG run with the NOVEG run revealed that the presence of vegetation usually produces a weak ISO. The vegetation effects on ISO intensity were significant over West Africa and South Asia, especially in the summer half-year.Vegetation also plays an important role in modulating ISO propagation. The eastward propagation of the ISO in the VEG run was clearer than that in the NOVEG run over the West African and Maritime Continent regions. The northward propagation of the ISO in the VEG run was more consistent with observation than that in the NOVEG run.     

朔黄铁路某桥墩混凝土裂缝原因分析

通过对朔黄铁路复线某桥墩混凝土裂缝的分析讨论，得出了该桥墩的裂缝属于温度变形裂缝的结论，同时，就大体积混凝土的浇筑提出了几点防治温度变形裂缝的措施。     

飞行器与机器人的区域目标搜索最优控制

描述了飞行器导航或移动机器人的区域搜索控制问题.为了使该问题得到优化解决,首先建立了基于区域搜索控制问题的模型,将最优控制原理运用于此模型上,得到其伴随方程和控制方程,后基于此分析了该问题,且讨论了此方法的可行性.然后,通过解出问题的规范方程,使飞行器导航或移动机器人的区域搜索控制问题最终得以解决,进而推导得到了飞行器导航或移动机器人的区域目标搜索最优控制以及最优轨线.最后,通过计算仿真结果表明,该方法是有效的,故为飞行器导航与移动机器人的区域目标搜索最优控制提供了依据.     

AH36钢两相区非平衡凝固路径的数值预测

应用多元合金两相区凝固显微偏析数学模型,对AH36钢在一定冷却条件下的非平衡凝固路径进行了数值计算,获得了相应的局部固相分数与局部温度之间的变化关系,为该钢种对应的连铸浇铸过程仿真及其它凝固过程仿真提供了必要而准确的耦合数据,具有重要的理论意义和广泛的适用性.