比较法在房地产开发中的应用

对"比较法"原理和应用情况进行了分析,说明其在房地产开发中能够科学地预测房地产的价格和收益,从而提高财务分析的科学性和权威性,为项目决策提供科学依据,以促进"比较法"在房地产开发中的应用。     

煤矿破碎机人员安全探测系统的研制

文中给出了煤矿人员安全探测系统设计的性能要求，详细介绍系统的硬件设计和软件设计。对利用热释电传感器实现人员定位与移动相对位置匹配算法设计进行深入细致的讨论．从防止漏报警、提高系统可靠性和降低系统功耗三个方面探讨了设计中涉及到的关键技术及其具体解决方法、与其他报警和定位系统相比，系统具有结构简单、成本低、功耗小、定位准确的特点。     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.     

Al2O3对镁铬耐火材料致密化的影响

为了提高镁铬耐火材料的烧结性能,通过考察气孔率、体积密度和常温耐压强度与Al2O3加入量之间的关系,讨论了Al2O3添加剂对两种不同镁铬耐火材料致密化的影响.结果表明,镁铬耐火材料的骨料不同,Al2O3对其烧结性能和致密化的影响也不一样.     

水系统的积垢及其物理控制技术

主要综述了水系统中水垢的种类、形成机理及其物理防治方法。详细阐述了静电、电子以及磁化等物理控垢法的工作原理及技术要点,并指出了其发展方向。     

喷墨打印相纸及打印图像质量的分析

喷墨打印相纸随着数码相机的发展近几年在国内发展迅速。针对目前产品质量没有测量标准的现状,提出喷墨相纸的质量指标主要为4个,即白度、光泽度、油墨吸收性和防水性。给出了相应的测量方法。并指出相纸上油墨点的面积是衡量质量的第一重要指标,其次是点的圆度。另外对图像输出的质量介绍了一种科学的评价方法,即图像的逼真性分析。说明图像的打印墨点直径不应小于方形像素的对角线长,图像才能真实再现。     

现代电弧炉流程钢液氮控制的试验研究

通过生产试验研究了电弧炉冶炼过程、LF精炼过程及连铸过程钢液氮的控制。研究表明，电弧炉冶炼过程主要是电弧区增氮，LF过程及连铸过程钢液增氮主要是钢液与大气接触，LF供电制度也对钢液吸氮有影响。