Shear-induced crystallization of poly(phenylene sulfide)

The crystalline morphology of poly(phenylene sulfide) (PPS) isothermally crystallized from the melt under shear has been observed by polarized optical microscope (POM) equipped with a CSS450 hot-stage. The shish–kebab-like fibrillar crystal structure is formed at a higher shear rate or for a longer shear time, which is ascribed to the tight aggregation of numerous oriented nuclei in the direction of shear. The crystallization induction time of PPS decreases with the shear time, indicating that the shear accelerates the formation of stable crystal nuclei. Under shear, the increase of spherulite growth rate results from highly oriented chains. The melting behavior of shear-induced crystallized PPS performed by differential scanning calorimetry (DSC) shows multiple melting peaks. The lower melting peak corresponds to melting of imperfect crystal, and the degree of crystal perfection decreases as the shear rate increases. The higher melting peak is related to the orientation of molecular chains. These oriented molecular chains form the orientation nuclei which have higher thermal stability than the kebab-like lamellae that are developed later. A new model based on the above observation has been proposed to explain the mechanism of shish–kebab-like fibrillar crystal formation under shear flow.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

管道安装工程中管路及附件匹配性问题研究

在管道设备安装工程中，常出现到货管材与管路附件不匹配的问题，究其原因，主要是目前国内使用的管材与管路附件标准繁杂、兼容性不高所致。为此，文章从管材及管件、阀门、管路法兰三方面分析了现行国内外标准之间、国标与行标之间存在的差异，并提出防止管材与管路附件不匹配的措施。     

罗坡坝水电站泄水建筑物设计及试验研究

罗坡坝水电站拱坝设置有三个溢流表孔,中间孔高程低于两侧的孔,三个泄水孔设有差动式挑坎。通过模型试验表明,不发生危及岸坡稳定的泄流雾化问题,此外,适当控制泄流水舌射程可以减少坝下冲坑深度,消能效果良好。     

谈谈职业教育的大众性

对职业教育的大众性问题进行了论述、实证分析和理论、政策、改革等思考。     

资秩学院单元07

日益增加的对于艺术的自治和自知，导致出现了这种范例式的建筑：白色立方体（白色的盒子）。这种白色盒子系统的边界被质疑：外部有来自社会的和经济上的压力，内部有在艺术实践中的压力，包括外部形象。本单元的目的是要研究在这些边界冲突的地方建筑的含意，发展一种新的自由诗歌样的系统模式，以及界定开放空间和封闭空间的途径。     

基于ANSYS的铸嘴流体耦合场三维有限元仿真分析

作者用大型有限元分析软件ANSYS对铸嘴内稳态层流铝熔体进行仿真分析。实现了三维建模。解决了三维热一流耦合求解的问题，得到铝流体的速度、压力及温度的分布图。分析了铸嘴出口速度和温度的分布规律及其对连续铸轧的影响。     

Transdermal Absorption of Zidovudine from Ethanol-Isopropyl Myristate Mixed System and Influence of Probenecid on It in Rats

Transdermal absorption of zidovudine (AZT) from an ethanol-isopropyl myristate (IPM) mixed system was examined in rats. For comparison of bioavailability (BA) after topical applications, 0.25 ml of the ethanol/IPM system containing 40% ethanol and 60 mM AZT was applied as a standard formulation. Values of the area under the plasma concentration-time curves of AZT for 8 hr (AUC_0-8), as indices of BA, following application of various formulations were compared with that of the standard formulation. Then the influence of content of the drug and ethanol, and application volume of the system was evaluated. BA was effectively improved only when the total amount of ethanol applied on the skin was increased. On the other hand, simultaneous transdermal application of AZT and probenecid increased the AU_0-8, of AZT without necessitating the increase in ethanol content in the formulation. In addition, coadministered probenecid improved cerebrospinal fluid/plasma concentration ratio of AZT.