Statistical estimation of average power dissipation usingnonparametric techniques

In this paper, we present a new statistical technique for estimation of average power dissipation in digital circuits. The present parametric statistical technique estimates the average power based on the assumption that the power distribution can be characterized by a preassumed function. Large error can incur when the assumption is not met. On the other hand, the existing nonparametric technique, although accurate, is too conservative and requires a large sample size in order to achieve convergence. For a good tradeoff between simulation accuracy and computational efficiency, we propose a new nonparametric technique using the properties of the order statistics. It is generally applicable to any type of circuit irrespective of its power distribution function. Compared to the existing nonparametric technique, it is much more computationally efficient since it requires a much smaller sample size to achieve the same accuracy specification. This new technique is implemented in the distribution-independent power estimation tool (DIPE). DIPE is empirically demonstrated to be more robust and accurate than the parametric technique     

Structure and Properties of Electroless Ni Deposits

The changes in structure and the hardness of two electroless deposited Ni-P alloy coatings (with P content of 1.5 and 9.5 wt pct) with heat treatment have been studied by XRD and TEM. The deposits containing 1.5 wt pct P can be represented as an fcc NiP supersaturated solid solution of 5~10 nm microcrystallites. whereas the deposits containing 9.5 wt pct P are amorphous. The heat treatment process induces crystallization of amorphous Ni to Ni phosphides and fcc Ni.Both of the deposits reach maximum hardness after annealing at 400℃ for 1 h. All coated steel specimens are inferior in fatigue strength to uncoated steel specimens mainly due to the poor fatigue resistance of the coating itself     

单轴-平面W型复合锶铁氧体的制备及其吸波特性研究

用草酸盐共沉淀和微量掺杂法研制六角晶系W型Ni,Zn,Co,Al多元复合锶铁氧体，通过调节Ni2W同Co2W的摩尔比例，可使该种铁氧体易磁化方向从C单轴型向垂于C轴的平面型转化，控制置换锶铁氧体中部分Fe3 的微量掺杂Al3 ，可以调整4πMs值，提高磁晶各向异性场，测试分析了5种不同含Co量的W型复合锶铁氧体粉料涂层的吸波特性，发现其自然共振吸收峰随Co含量增加向低频方向偏移，最高吸收峰可达32．8dB，是适用于电子隐形技术的高品位的微波吸收剂。     

纳米聚N-异丙基丙烯酰胺微凝胶的光引发聚合

选择具有温敏性的高分子单体N－异丙基丙烯酰胺（N－isopropylacrylamide，NIPAM）为主单体，N，N′－亚甲基双丙烯酰胺（methylenebisacrylamide，MBA）为交联剂，运用光引发无皂乳液聚合的方法合成出粒径小于100nm的高分子微凝胶，并研究了在改变体系组成和条件时微凝胶粒径的变化。结果显示，在乳化剂临界胶束浓度以下，随着乳化剂浓度的提高，微凝胶粒子的粒径不断关小且趋向稳定；相比于热引发，产生的微凝胶具有较高的单分散性而且粒径较小。     

磨损自补偿添加剂在成品油中的摩擦学效应

利用四球试验机考察了二聚酸－3－氯－2－羟基丙单酯（DAE）在4种成品油中的摩擦学性能。试验结果表明，DAE添加剂在L－HM68液压油和L－DAB100空压机油中具有良好的适应性，使其承载能力增强，摩擦系数降低及耐磨性增强；DAE在L－CKE涡轮蜗杆油中使耐磨性增强；DAE在L－CKC150齿轮油中虽使承载能力提高，减磨性增强，但有使耐磨性减小的趋势，说明DAE在不同的油中有不同的性能。     

电子膨胀阀在电子吊舱制冷系统中的应用研究

介绍了军用飞机电子吊舱蒸汽压缩制冷环境控制系统的工作特点，给出了电子膨胀阀在电子吊舱地面模拟制冷系统中的初步试验研究结果。     

石材成型爆破开采方法简介

本文介绍了一些国内原有的及近年来发展的用于石材开采的成型爆破方法,简单扼要地阐明了这些方法的原理、装药结构及主要特点,对全面认识及合理选择这些方法有一定帮助。     

A unified approach for the analysis of grating-assisted couplers

Two coupled-mode theories based on individual waveguide modes and compound system modes, respectively, are briefly reviewed with proper modification and new comments. The relation between these two theories is built and it is found that one theory is actually an efficient approximation of the other. Also, the reason why the results obtained with the first more accurate than those obtained with the second is found. The constraint on both approaches is shown     

晶须取向对SiCw／Al复合材料切削表面质量的影响

切削与晶须取向方向间的夹角对ＳｉＣｗ／Ａｌ复合材料切削表面质量有很大影响。当切削角为４５°时，晶须拔出和转动现象均较少，复合材料切削表面粗糙度最低。当切削角为１３５度时，晶段转动造成的撕裂破坏程度很大，复合材料切削表面粗糙度最大。     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。