A miniature triaxial apparatus for investigating the micromechanics of granular soils with in situ X-ray micro-tomography scanning

The development of a miniature triaxial apparatus is presented. In conjunction with an X-ray micro-tomography (termed as X-ray μCT hereafter) facility and advanced image processing techniques, this apparatus can be used for in situ investigation of the micro-scale mechanical behavior of granular soils under shear. The apparatus allows for triaxial testing of a miniature dry sample with a size of \mathrm{8}\hspace{0.17em}\mathrm{mm}\times \mathrm{16}\hspace{0.17em}\mathrm{mm} (diameter \times height). In situ triaxial testing of a 0.4–0.8 mm Leighton Buzzard sand (LBS) under a constant confining pressure of 500 kPa is presented. The evolutions of local porosities (i.e., the porosities of regions associated with individual particles), particle kinematics (i.e., particle translation and particle rotation) of the sample during the shear are quantitatively studied using image processing and analysis techniques. Meanwhile, a novel method is presented to quantify the volumetric strain distribution of the sample based on the results of local porosities and particle tracking. It is found that the sample, with nearly homogenous initial local porosities, starts to exhibit obvious inhomogeneity of local porosities and localization of particle kinematics and volumetric strain around the peak of deviatoric stress. In the post-peak shear stage, large local porosities and volumetric dilation mainly occur in a localized band. The developed triaxial apparatus, in its combined use of X-ray μCT imaging techniques, is a powerful tool to investigate the micro-scale mechanical behavior of granular soils.     

印度卫星导航系统发展及现状研究

介绍了印度 GPS 辅助型静地轨道增强导航系统(GAGAN)和印度区域卫星导航系统(IRNSS)的最新研究进展，重点介绍了 IRNSS 系统的体系结构、信号样式和导航电文，分析了 IRNSS 系统的能力，最后介绍了印度导航系统的发展计划。     

Wetting,infiltration and interaction behavior of CMAS towards columnar YSZ coatings deposited by plasma spray physical vapor

Thermal barrier coatings (TBCs) produced by electron beam physical vapor deposition (EB-PVD) or plasma spray (PS) usually suffer from molten calcium-magnesium-alumino-silicate (CMAS) attack. In this study, columnar structured YSZ coatings were fabricated by plasma spray physical vapor deposition (PS-PVD). The coatings were CMAS-infiltrated at 1250?°C for short terms (1, 5, 30?min). The wetting and spreading dynamics of CMAS melt on the coating surface was in-situ investigated using a heating microscope. The results indicate that the spreading evolution of CMAS melt can be described in terms of two stages with varied time intervals and spreading velocities. Besides, the PS-PVD columnar coating (～100?μm thick) was fully penetrated by CMAS melt within 1?min. After the CMAS attack for 30?min, the original feathered-YSZ grains (tetragonal phase) in both PS-PVD and EB-PVD coatings were replaced by globular shaped monoclinic ZrO₂ grains in the interaction regions.     

快速灵敏的LC-MS/MS法测定人血浆中阿莫西林并应用于两种制剂的一致性评价

目的: 建立快速灵敏的LC-MS/MS法测定人血浆中阿莫西林浓度，并用于两种阿莫西林胶囊的一致性评价。方法: 采用岛津公司LCMS-8060型LC-MS/MS仪，以MRM模式测定阿莫西林（m/z 366.00/114.00）的浓度，d4-阿莫西林作内标（m/z 370.10/114.05），离子源为ESI源。色谱柱选用Waters ACQUITY BEH C18（2.1×50 mm，1.7 μm），梯度洗脱。血浆样本加入内标，经甲醇沉淀蛋白后取上清液进样检测。结果: 所建方法经验证，其线性、准确度、精密度、最低定量限、提取回收率、特异性、基质效应、稳定性等各项指标均符合CFDA的指导原则及最新核查标准要求，并较文献报道中的方法有处理简单、灵敏度高、色谱峰形好的优点。结论: 所建方法快速、灵敏，适用于人血浆中阿莫西林浓度的检测。用于一致性评价的样本实测，两种制剂生物等效。     

基于GSK983Ma铣床数控加工中心对刀仪的研究与设计

为满足用户对加工精度和效率越来越高的要求,很多数控机床生产厂家及用户都希望在其机床上配备各种加工精度监测设备,在机床上使用测量装置进行自动测量,直接对刀具位置进行测量,并根据测量结果自动修正刀具的偏置量,使同样的机床能加工出更高精度的零件。因此该项目的设计就是一个能在数控加工中心上使用的简易自动对刀仪。该对刀仪采用机械触发式传感器,通过控制铣刀运动来触发传感器,PLC把传感器得到的信号传给数控系统,再由系统来进行相应的数据处理。而机械触发式传感器与PLC的输入扩展端的连接线简单,且易于维护,并可以提高生产率,降低加工成本。     

数据挖掘技术在软件系统中的应用

随着高新科学技术的发展,科学家研究出的利于人类工作生活的技术程序越来越多,大部分技术主要集中在如何帮助人们简化平时的工作量,能快速查找到自己所需要的信息,毕竟现代社会,工作效率和工作质量是关键。数据挖掘技术就具备这样的特点,数据挖掘技术在软件系统的应用将大大降低我们的工作量,提高我们的工作效率。现在我们研究数据挖掘技术在软件系统的应用,分析它是如何发挥其作用的,希望能提高使用该挖掘技术人员的使用效率。     

连续型衍射透镜激光直写技术研究

研究了不同于台阶形式的具有连续浮雕结构的衍射聚光透镜的激光直写工艺,简要描述了光致抗蚀剂的曝光和显影,对激光直写工艺的机理和工艺过程进行阐述.利用CLWS-300W/C极坐标激光直写设备制作出了具有良好面形微结构和较高衍射效率的连续型衍射透镜.研究表明,激光直写技术直写精度高,加工工艺灵活,利用计算机的控制,能够根据光学设计产生的浮雕分布数据制作复杂的、任意形状和外形的微型浮雕结构,非常适合于高精度微光学元件的加工制作.     

制备条件对硅基介孔分子筛孔结构的影响

采用溶剂热法制备了硅基介孔分子筛材料,较系统地考察了晶化温度、晶化时间及焙烧温度等因素对其结构的影响,并利用N2吸附手段进行了表征.结果表明,晶化温度和晶化时间能明显影响硅基介孔材料的结构,而过高的焙烧温度易导致介孔结构的塌陷.     

Applications and Technologies of All-Solid State Blue Laser

1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.     

等离子体刻蚀工艺控制模型分析

讨论了主因素分析法以及神经网络法在等离子体刻蚀工艺中的应用.结果表明主元素分析法可以实现对数据的压缩,而神经网络算法则显示出比传统的统计过程控制算法更好的准确性.