气刀操作条件对聚丙烯密相脉冲气力输送行为的影响

在一管线水平长１９ｍ、垂直长１１ｍ、内径５０ｍｍ的密相脉冲气力输送实验台上进行了气刀操作条件对管道输送行为影响的实验研究．结果表明：气刀操作条件对管道输送气速、输送能力、固气比、能耗等均有明显影响．确定最佳的气刀操作条件需综合考虑发送压力、输送结构、物料物性等因素．     

Cooperative effect of crystallization temperature and NaF addition in the formation process and hydrothermal stability of MCM-48 mesoporous molecular sieve

The hydrothermal stability of MCM-48 was conveniently and effectively improved by increasing the crystallization temperature and directly adding NaF to the synthesis gel. The crystallization temperature varied from 373 K to 403 K. The influences of NaF addition, crystallization temperature and crystallization time on the formation process and hydrothermal stability of MCM-48 were systematically studied here to solve the problem of poor reproducibility. Results from XRD patterns indicated that the crystallization temperature and crystallization time were very critical factors for the improvement of the hydrothermal stability besides NaF addition. The formation process of MCM-48 was significantly accelerated and the pore structure ordering was also greatly improved by increasing the crystallization temperature and F⁻/Si ratio. A high hydrothermally stable MCM-48 mesoporous molecular sieve was obtained after being crystallized at 393 K for 36 h in the presence of NaF, which endured the hydrothermal treatment in boiling water at least for 4 days. However, only an amorphous product was obtained when the crystallization temperature was further increased to 403 K. Results from Si MAS NMR, N₂ adsorption isotherms, TEM, Raman spectra and XRD patterns manifested that the improved stability of MCM-48 was attributed to the high silicates condensation degree and the excellent pore structure ordering. The possible reason for the successful formation of hydrothermally stable MCM-48 sample by controlling the crystallization temperature, time and F⁻/Si ratio was explained here.     

响应面优化褶皱假丝酵母脂肪酶催化合成木质甾醇油酸酯

以木质甾醇转化率为指标,考察了10种常见商业化脂肪酶催化合成木质甾醇油酸酯的效果,确定褶皱假丝酵母脂肪酶(CRL)为优选生物催化剂,进一步筛选出正己烷为优选反应介质.在脂肪酶用量、油酸和木质甾醇的物质的量比、反应温度和反应时间这4个单因素考察基础上,通过响应面分析法对酶催化木质甾醇油酸酯合成工艺条件进行优化,并对优化条件进行验证和放大实验.CRL催化合成木质甾醇油酸酯的优化工艺参数为:CRL添加量为木质甾醇质量的10％,油酸与木质甾醇的物质的量比为3.8:1,反应温度为46℃,反应时间为28 h,木质甾醇的转化率为91.56％±0.25％.     

铝在钼酸盐复合电解液中的阳极火花氧化

采用阳极火花氧化处理技术，在含有钼酸盐等金属盐的碱性电解液中，通过阳极氧化在铝表面形成了复合转化膜。对电解液中的各组分在成膜过程中的作用及电解工艺参数对成膜过程和膜层性能的影响进行了研究探讨。通过与铬酸盐化学氧化法、常规阳极氧化法相比较，结果表明，铝表面阳极火花氧化方法形成的膜层比其它膜层有着更好的功能特性。     

Investigation of bio-ethanol steam reforming over cobalt-based catalysts

The catalytic performance of cobalt catalysts supported on γ-Al₂O₃, TiO₂, ZrO₂ were studied for bio-ethanol steam reforming (BESR) reaction. The supported catalysts (10 wt%Co) were prepared by impregnation and characterized through Thermogravimetric analysis (TGA), H₂ chemisorption, laser Raman Spectroscopy, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), and temperature-programmed reaction (TPRxn). The metallic cobalt sites were found to correlate with the BESR reaction activity. The reaction and H₂ chemisorption showed that ZrO₂ supported catalyst showed the best dispersion and best catalytic activity. Over the 10% Co/ZrO₂ catalyst, using a H₂O:EtOH:inert molar ratio of 10:1:75 and a GHSV = 5000 h⁻¹, 100% ethanol conversion and a yield of 5.5 mol H₂/mol EtOH were obtained at 550 °C and atmospheric pressure.     

煤焦油改性酚醛树脂研究

引入含有多环芳烃煤焦油组分来改性酚醛树脂,在反应釜中按一定比例加入苯酚、甲醛、氢氧化钠和煤焦油.在碱性催化剂作用下反应4～7 h,真空脱水,得到了煤焦油改性热固性酚醛树脂.对改性后树脂的固含量、残炭值测定和热失重-差热分析,结果表明煤焦油加入量为苯酚质量的15%时改性树脂具有较大的固含量和残炭值,耐热性也得到了显著提高.     

面板堆石坝垫层渡汛离心模型试验研究

西北口水库大坝是我国建设的第一座百米级钢筋混凝土面板堆石坝,其百年一遇洪水渡汛水位降落幅度21.63 m,水位骤降速度最大可达3.65 m/h。面板尚未浇筑前的堆石坝体需临时拦洪渡汛,坝体垫层既起面板垫层作用,还要保证堆石坝体安全渡汛,水位骤降对垫层将产生拖拽力作用,影响到垫层的稳定性。本文通过面板堆石坝垫层渡汛离心模型试验,对不同渗透性垫层安全渡汛进行了试验研究,试验研究成果被西北口面板堆石坝工程施工期安全渡汛设计采纳,为面板坝工程建设特别是施工期安全渡汛提供了技术支撑。     

蒸汽计量系统的改造及实施方案

通过对一个蒸汽计量系统的实施方案的简单介绍 ,为老企业蒸汽计量系统的改造提供了一种新的经济可行的思路。同时简单介绍了软件开发相关的两个关键控件 :Timer控件和MSComm控件。     

基于工作流和智能手机的城市综合管理平台

为适应现代城市综合管理的需要,提高城市管理水平,提出利用GIS技术的二三维一体化联动提高管理平台可视化;基于工作流的管理使事件处理更加自动化;利用智能手机的方便使管理人员与系统进行动态交互;利用模糊数学提高任务完成质量评价的科学性。整个平台在Windows7下进行开发,基于B/S(浏览器/服务器)和C/S(客户端/服务器)结合的架构,运用JavaEE、工作流、模糊数学、无线通信、视频融合等技术,实现平台对交通灯、人员、车辆、消防、事件和任务的管理。     

钛硅体系的制备与特性

采用水解法制备二氧化硅掺杂的二氧化钛体系；用X射线衍射、激光粒度仪、IR对其进行表征；观察其对甲基橙的光催化性能，并与纯二氧化钛体系性能对此；结果表明掺杂改变了钛硅结合，最小粒度有最好催化性能。