A double-layer current conduction model for high-κ gate dielectric materials with interfacial oxide or silicate layer

The current-voltage (I-V) characteristics of metal-oxide-semiconductor (MOS) structures with hafnium oxide as the gate dielectric film were studied. Sharp shifts from a low-voltage ohmic regime to a tunneling conduction were observed in the high-voltage range. The paper demonstrates that this behavior can be described very well with a double-layer dielectric model. Excellent fittings of the experimental curves were obtained and the related key structural and physical parameters were obtained. The model fitting further suggests the optimal annealing conditions for preparing the hafnium oxide films.     

转炉负能炼钢攻关对策

通过介绍转炉炼钢工艺流程及工序能耗分析，为提高转炉煤气回收量及降低电耗采取了一系列攻关措施，实现了转炉负能炼钢，取得了一定经济效益。     

油脂己烷浸出工程进展

油脂己烷浸出工程经过几十年的发展，在工艺、设备、自控、节能、环保等方面都已趋于完善。装置的规模日趋大型化。车间内的工段组合更加科学、合理与多样化，浅料层浸出器，形式多样化的湿粕脱溶系统，湿粕挤压机，废水零排放系统，不同理念的负压蒸发及余热回收系统，蒸汽冷凝水的再利用，简洁实用的全电脑操作系统，分步萃取，混合油过滤，浸出车间内的混合油碱炼、水化脱胶、磷脂干燥等使得当今的油脂浸出向大型化、集约化、自动化、节能环保的方向发展，为客户提供了越来越多的选择。     

铝合金结构件液固复合挤压模具的设计

挤压铸造和固态挤压的有效结合，能够得到组织致密的结构件。通过增加补偿板和垫板，能够较方便的实现挤压铸造后的固态挤压工序。本文介绍了针对圆柱形制件的液固复合挤压模具的模具结构和工作过程，这种一模两工序的设计思想也可应用于其他结构件的成形。     

Oxidation of some aliphatic polyols on anodically deposited MnO2

Galvanostatic steady state current potential measurements were carried out for oxidation of a series of aliphatic alcohols having varying number of hydroxyl groups. The anodically deposited layer of MnO₂ on platinum was used as the electrode material. The deposit was characterised by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrode potential measurements. The catalytic role of MnO₂ in the electro-oxidation of alcohols was indicated by the chronopotentiograms and the cyclic voltammograms. An analysis of the electrochemical data indicated a catalytic EC mechanism in which Mn (V) is generated electrochemically and consumed chemically in succession. Based on this and the hydrogen bonding interaction between alcoholic hydroxyl groups and MnO₂ layer, a mechanism was proposed which accounts for the variation in the observed electrochemical reaction orders. Tafel behaviour was found to be followed only approximately. Current efficiency of the electrochemical oxidation of polyols was studied. Replacement of platinum by carbon as current collector was found to leave the electrocatalytic activity of the MnO₂ deposit practically unaltered.     

新形势下的研究生思想政治工作探索

在新的历史时期 ,研究生思想状况受市场经济的影响呈现出业务学习积极、开放竞争意识强化 ,价值取向多元化、道德观念复杂化 ,集体主义淡化、个人意识加强等多样化特征 ,使研究生思想政治工作更为复杂、更为艰巨。针对这种形势 ,本文提出研究生思想政治工作必须立足于研究生思想状况多样化的现实 ,采取多种措施才能做好研究生思想政治工作 ,并进一步提出了新的历史时期开创研究生思想政治工作新局面应采取的对策措施     

高能球磨FeCo+MnO的结构与磁性研究

用高能球磨采用两种方案制备了FeCo MnO体系,并用X射线衍射和振动样品磁强计对其结构和磁性质做了分析.发现采用直接氧化Mn而得到MnO的方法,所得体系的MnO较纯;而通过分解MnCO3得到MnO的体系,MnO纯度较低,有较多Mn3O4杂质,两种方法制备的FeCo MnO体系的矫顽力和剩磁比都比单纯FeCo体系的增加很多,且前一种方法比后一种方法制备的FeCo MnO体系的矫顽力和剩磁比较大.然后研究了球磨时间及退火处理对FeCo MnO体系矫顽力及剩磁比的影响,发现球磨时间为120h体系的矫顽力和剩磁比最大;经过退火处理后,体系的矫顽力和剩磁比都有较大幅度的增加.     

基于单片机技术的机械设备计时器的研制

介绍一种基于单片机和振动传感器技术，采用软、硬件结合设计的新型数字式机械设备计时器，分析了原理、硬件结构、技术方法、配套设备和软件功能。     

掺Tb_2O_3法拉第旋转玻璃

本文研究了掺Tb_2O_3的法拉第旋转玻璃的组成、物理化学性质及制备技术,实验结果表明维尔德常数V随着Tb_2O_3浓度的增大而增大,硼硅酸盐玻璃中Tb_2O_3含量大于20％(mol)时,维尔德常数可以达到-0.0030min/A/m·cm,从熔制试验结果0.5L铂坩埚可以获得质量较好的φ50×25mm的样品。