Examination of the dual‐band microwave wireless access system using radio on fiber technique

The Radio on Fiber (ROF) technique has great potential in wireless communication systems. In this paper, we report on a fundamental examination of microwave wireless access systems based on Radio on Fiber. First, we designed and constructed examination systems by applying dual band (2.4 and 5 GHz) multiservice transmission systems and confirmed that there was sufficient performance through a transmission experiment. Then, application of FP‐LD (Fabry Perot Laser Diode) was considered in order to reduce the system cost, and for the most part degradation of the transmission characteristics was not observed when FP‐LD was used. Finally, a BIDI (bidirectional) module which integrated LD and PD within one package was made to further reduce costs. By measuring the transmission performance, applying the BIDI module to ROF systems was shown to be effective. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(4): 32–40, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20471     

N-Alkylation of chitin and some characteristics of the novel derivatives

Summary Introduction of simple alkyl groups at the C-2 nitrogen of chitin and some properties of the resulting N-alkyl-chitins have been examined. Chitosan was fully deacetylated and treated with three kinds of aldehydes, formaldehyde, acetaldehyde, and pentanal. The Schiff bases of chitosan, whose extents of substitution were dependent on the amount of aldehydes, were reduced with sodium cyanoborohydride to N-alkylated chitosans. The N-alkyl-chitosans were then transformed into the corresponding N-alkyl-chitins by acetylation with acetic anhydride followed by transesterification to remove partly formed O-acetyl groups. The resulting N-methyl-, ethyl-, and pentyl-chitins were amorphous and showed improved affinity for organic solvents. Received: 13 December 2001/Revised version: 11 January 2002/Accepted: 17 January 2002     

Measurement of gain saturation coefficients in strained-layermultiple quantum-well distributed feedback lasers

Gain saturation coefficients of unstrained- and strained-layer multiple-quantum-well lasers were measured experimentally. These coefficients were higher in lasers that had compressive strain in their active-layer wells: 2.45×10^-17 cm³ with unstrained wells and 12.6×10^-17 cm³ with strained wells. The higher gain saturation coefficient in lasers with strained active-layer wells is related to their higher linear TE mode gain coefficient. The linearity factor (K factor) between a laser's damping constant and the square of the laser's resonant frequency decreased slightly with the introduction of the strain in the laser's active layer wells. This factor, however, took the value of about 0.2×10^-9 s for each of these lasers     

Performance of ternary PtRuRh/C electrocatalyst with varying Pt:Ru:Rh ratio for methanol electro-oxidation

Highly dispersed ternary PtRuRh/C anode catalysts for direct methanol fuel cells were prepared with various contents and their electro-catalytic activities towards methanol oxidation at 25 °C and 60 °C were examined to investigate the influence of the catalyst composition. Electrocatalysts were prepared by a co-impregnation method using ethanolic solutions of metal precursors and carbon black followed by pyrolysis under reducing conditions. X-ray diffraction analysis revealed that the fcc peaks shifted to higher diffraction angles with increasing Rh content, indicating the alloying of Rh into the fcc structure. In terms of the mass specific current density, the activity towards methanol oxidation differed significantly depending on the catalysts composition and cell temperature. The catalyst prepared at a ratio of Pt:Ru:Rh = 1:1:2 exhibited the highest activity at 60 °C of 155 A (g-Pt)⁻¹ at 0.5 V vs. RHE.     

Spreading behavior of polymerizable monolayers of acrylamides with double alkyl chains and polymerization of the LB films

The spreading behavior of N,N'-dialkylacrylamide (dAAs) monomers on a water surface is investigated by measurement of surface pressure-area isotherms as a function of alkyl chain length and temperature. The monolayers of dAAs can be classified into three types. (I) N,N'-dioctadecylacrylamide (dODA) shows a rapid increase in surface pressure indicating formation of a rigid condensed monolayer; (II) the isotherm of N,N'-dihexadecylacrylamide (dHDA) has a plateau region in surface pressure corresponding to a phase transition from a expanded form to a condensed form, which corresponds to gel-liquid crystal phase transition often observed in biomembranes; and (III) the dialkylacrylamides with alkyl chain length shorter than the hexadecyl group form expanded monolayers with no condensed monolayer at any temperature. The similar three kinds of monolayers are also observed in the isotherms for dHDA monolayer as a function of temperature. It is found that two carbon elongation in double alkyl chains causes the same effect on the monolayer induced by about 10 °C cooling. Under various conditions, only liquid condensed monolayers are transferred on to a solid support, yielding the monomer LB films, practically, of dODA at any temperature and dHDA at low temperature. The polymerization of those LB films by UV irradiation was ascertained by the electronic absorption spectra.     

Influences of electroosmotic flows in nanopillar chips on DNA separation: Experimental results and numerical simulations

The various potential factors affecting the performance of nanopillar chips on DNA separation were investigated from the viewpoints of both numerical calculations and actual experiments. To yield higher performance and replace the conventional DNA separation techniques such as microchip electrophoresis, the phenomenon specific to the nanopillar chips should be deeply understood. In this paper, although various factors affecting the performance of the nanopillar chips are considered, we focused on the effect of electroosmotic flow, which is particularly noticeable in quartz-made nanopillar chips. High-resolution separation of DNA was realized when an electroosmotic flow was suppressed by simply using a higher concentration of buffer, but DNA separation failed in the presence of an electroosmotic flow. It was confirmed from the numerical simulations and the direct observations that the deformation of DNA band during the injection process was induced by electroosmotic flow and consequently led to a poor resolution.     

Determination of optimal sending voltage profile in distribution systems with distributed generators

Sending voltage profile of distribution feeder is controlled by changing a tap of distribution transformer. In a distribution network with distributed generators, for reasons of effect of reversed flows from them and existence of a great number of sending voltage profile candidates, it is not easy to control sending voltage profile within the acceptable voltage limit. In this paper, in order to determine the optical sending voltage profile of distribution transformer in a distribution network with distributed generators, the authors propose a new method to determine the optimal sending voltage profile so as to minimize the total number of tap position's change per day under constraints of acceptable voltage limit. In the proposed method, after calculating acceptable range of three‐phase voltage of distribution feeder, the optimal profile of tap position within the calculated acceptable voltage range is determined among these candidates by using reduced ordered binary decision diagram (ROBDD) which is an efficient enumeration algorithm. In order to check the validity of the proposed method, numerical simulations are carried out for a distribution network model with a distributed generator. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 16–24, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20393     

Superplasticity in ceramics

It is now recognized that superplasticity is a potential deformation process in ceramics. This review summarizes the major characteristics of superplasticity and examines the reports of both transformation and structural superplasticity in ceramic and other non-metallic materials. It is shown that there are both similarities to and differences from metals. Similarities include the variation of strain rate with stress and grain size, but an important difference is the necessity to consider the role of intergranular glassy phases in ceramics. Superplasticity is also important in intermetallic compounds, and in geological materials where there is evidence for superplastic deformation both in laboratory experiments and in natural deformation.     

Stereospecific analysis of triacyl-sn-glycerols by chiral high-performance liquid chromatography

A method for the stereospecific analysis of triacyl-sn-glycerols by high-performance liquid chromatography (HPLC) on a chiral column is described. Triacyl-sn-glycerols were partially degraded with ethyl magnesium bromide, and the monoacylglycerols produced were separated as 1- and 2-monoacylglycerol fractions by thin-layer chromatography on boric acid-impregnated silica gel plates. The 1-monoacylglycerols were resolved intosn-1 andsn-3 monoacylglycerol fractions by HPLC on a chiral column (Sumichiral OA-4100) after derivatization with 3,5-dinitrophenyl isocyanate. Fatty acid methyl esters obtained from the original triacyl-sn-glycerols, 1- and 2-monoacylglycerol fractions, andsn-1 andsn-3 monoacylglycerol fractions were analyzed by gas chromatography on open-tubular columns. Stereospecific acyl distributions in triacyl-sn-glycerols were calculated from the data. The acyl distributions of several oils were obtained. The method is rapid, simple and gave reproducible results.     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.