Source identification of nitrous oxide on autotrophic partial nitrification in a granular sludge reactor

Emission of nitrous oxide (N₂O) during biological wastewater treatment is of growing concern since N₂O is a major stratospheric ozone-depleting substance and an important greenhouse gas. The emission of N₂O from a lab-scale granular sequencing batch reactor (SBR) for partial nitrification (PN) treating synthetic wastewater without organic carbon was therefore determined in this study, because PN process is known to produce more N₂O than conventional nitrification processes. The average N₂O emission rate from the SBR was 0.32 ± 0.17 mg-N L⁻¹ h⁻¹, corresponding to the average emission of N₂O of 0.8 ± 0.4% of the incoming nitrogen load (1.5 ± 0.8% of the converted NH₄⁺). Analysis of dynamic concentration profiles during one cycle of the SBR operation demonstrated that N₂O concentration in off-gas was the highest just after starting aeration whereas N₂O concentration in effluent was gradually increased in the initial 40 min of the aeration period and was decreased thereafter. Isotopomer analysis was conducted to identify the main N₂O production pathway in the reactor during one cycle. The hydroxylamine (NH₂OH) oxidation pathway accounted for 65% of the total N₂O production in the initial phase during one cycle, whereas contribution of the NO₂⁻ reduction pathway to N₂O production was comparable with that of the NH₂OH oxidation pathway in the latter phase. In addition, spatial distributions of bacteria and their activities in single microbial granules taken from the reactor were determined with microsensors and by in situ hybridization. Partial nitrification occurred mainly in the oxic surface layer of the granules and ammonia-oxidizing bacteria were abundant in this layer. N₂O production was also found mainly in the oxic surface layer. Based on these results, although N₂O was produced mainly via NH₂OH oxidation pathway in the autotrophic partial nitrification reactor, N₂O production mechanisms were complex and could involve multiple N₂O production pathways.     

Wireless Body Area Network Combined with Satellite Communication for Remote Medical and Healthcare Applications

Wireless Body Area Network (WBAN) is expected to play an important role in supporting medical and healthcare services with increased convenience and comfort. One main advantage of WBAN is that it enables automatic biosignal collection in real time which is essential in medical treatment and healthcare vigilance. To harmonize with the strong demands from both medical and healthcare societies, and information and communications technology industries, IEEE 802 Standard Committee set up a task group of TG15.6 to develop an IEEE wireless standard on WBAN. In this paper, we first review the main activities of TG15.6 with the updated status. Then, we present a prototype WBAN system that is implemented by using ultra-wideband technology. Multi-hop mechanism is adopted to guarantee reliable connection. Finally, we describe an experimental system that uses the developed WBAN system by combining with satellite communication in supporting remote medical treatment and healthcare. In case of less of medical resources such as in emergency, in rural or isolated areas, such a system is important in sending the corresponding biosignal to a remote hospital in real time to help patient management. The relative delay of WBAN data delivery via satellite is measured which is dependent on the satellite link capacity.     

Comparison of soyasaponin and isoflavone contents between genetically modified (GM) and non-GM soybeans

Soyasaponins and isoflavones are main secondary metabolites in soybeans. In this report we compared the content of secondary metabolites between genetically modified (GM) and non-GM soybeans. Six cultivars/lines of GM and six cultivars/lines of non-GM soybeans were extracted with methanol. Each extract was partitioned with aqueous methanol and hexane and the aqueous methanol fraction was partially purified by HP-20 and LH-20 column chromatography to afford crude soyasaponin and isoflavone fractions. The main A-type soyasaponin, acetylsoyasaponin A1 (AcA1), and the main B-type soyasaponins, soyasaponins I and II (I and II), in the crude fractions were identified by LC/MS analyses with authentic samples. The main isoflavones, daidzin, genistin, daidzein and genistein (DI, GI, DE and GE), in the crude fractions were identified by LC photo-diode array analyses with authentic samples. The contents of AcA1, I and II in the crude soyasaponin fractions and those of DI, GI, DE and GE in the crude isoflavone fractions were analyzed by reversed-phase HPLC. The average contents (mg/100 g) of AcA1, I, II and total of B-type soyasaponins in GM soybeans were 36.4 +/- 24.2, 51.2 +/- 11.8, 26.4 +/- 7.6 and 77.7 +/- 18.5, respectively, and those in non-GM ones were 22.3 +/- 14.7, 46.3 +/- 17.8, 19.8 +/- 9.1 and 65.9 +/- 26.9, respectively. The average contents (mg/100 g) of DI, GI, DE, GE and total isoflavones in GM soybeans were 93.1 +/- 15.5, 121.8 +/- 19.4, 0.073 +/- 0.178, 0.320 +/- 0.082 and 215.3 +/- 33.3, respectively, and those in non-GM ones were 78.8 +/- 34.6, 106.7 +/- 28.3, 2.206 +/- 4.468, 0.822 +/- 0.754 and 188.5 +/- 26.7, respectively. There were no statistically significant differences in soyasaponin and isoflavone contents between GM and non-GM soybeans. Therefore, it was estimated that the GM soybeans are equivalent to the non-GM ones in terms of the composition of the main secondary metabolites.     

Development of mushrooms for thrombosis prevention by protoplast fusion

With thrombosis a major cause of death in Japan and the Western world, thrombin-inhibitory agents that constrain the formation of fibrin are sought. We screened for basidiomycetes showing anti-thrombin activity and isolated Laetiporus sulphureus. However, it was difficult to cultivate and its form was not satisfactory. We therefore used protoplast fusion between L. sulphureus and the commonly cultivated basidiomycete Hypsizygus marmoreaus to obtain cultivable basidiomycetes that produced an anti-thrombin substance. For the protoplast fusion of L. sulphureus and H. marmoreaus, the protoplast concentration, alternating electric field intensity, dielectrophoresis duration, and field pulse intensity used were of 1 x 10(7) protoplasts/ml, 100 V/cm.1 MHz, 60 s, and 8 kV/cm, respectively. The number of regenerated colonies obtained was 4961, from which 43 strains were selected for electrophoretic analysis. Four of the fusants were found to have a band from each parent in isozyme patterns obtained using their crude extract. The fruiting bodies of the fusants were very similar to those of H. marmoreaus. Crude extract from each of the fusants and from L. sulphureus showed anti-coagulative activity in terms of the thrombin clotting time. We thus obtained improved basidiomycetes that produce an anti-thrombin substance, are easily cultivated, and whose form resembles H. marmoreaus, a commonly used culinary mushroom.     

MgATP-induced conformational changes in a single myosin molecule observed by atomic force microscopy: periodicity of substructures in myosin rods

This paper discusses the conformational changes in a single myosin molecule directly observed using atomic force microscopy (AFM). The myosin molecules were pretreated in rigor solutions without MgATP or in relaxed solutions with various concentrations of MgATP. The images of these molecules were obtained using a tapping mode AFM. The results indicate that the orientation of the myosin's heads and tail strongly depend on the MgATP concentration. Without using MgATP, almost all of the myosin molecules are in the extended form; however, when MgATP is used, the molecules bend according to the level of MgATP concentration. The mean-square end-to-end distance of the myosin molecules is significantly shorter with p[MgATP] = 4 than with p[MgATP] = 6. The rod region did not show the same level of intensity along their length in the extended form. The rods exhibited clusters of discontinuity, which were identified as substructures. The size of these substructures change at intervals that are multiples of 14.3-14.5 nm, which reflects the periodicity of the alpha-helical coiled coils. The substructure clusters also correspond to the myosin crossbridge spacing in muscles (14.3 or 43 nm). These results suggest that the myosin's head bends in conjunction with the bending or tilting in the helical substructures. Conformational changes of the myosin molecule induced by MgATP seem to mimic the molecular motions in a muscle's force generation process.     

Computer-aided design of a factor Xa inhibitor by using MCSS functionality maps and a CAVEAT linker search

We have investigated a new approach to efficiently find a novel inhibitor against a serine protease (i.e. an activated coagulation factor X, FXa) by using de novo design programs and the X-ray crystal structure of the target enzyme. FXa is a coagulant enzyme that generates thrombin (a serine protease) and participates in both intrinsic and extrinsic coagulation pathways. We adopted multiple copy simultaneous search (MCSS) and CAVEAT linker search techniques, which disclosed a novel FXa inhibitor (T01312) consisting of two binding moieties (the benzamidinyl and adamantyl groups) and a linker unit (the carboxybenzylamine group). The inhibitory activity of T01312 against FXa was determined to be a small K(i)-value of 48nM, which is two orders of magnitude smaller than that against thrombin. An X-ray crystal analysis of T01312 complexed with trypsin (an analogue of FXa) and docking studies of T01312 with trypsin and FXa showed that: (i) the benzamidinyl group is a predominant binding moiety in the anionic pocket (S1 site) with an asparatic acid residue; (ii) a hydrophobic pocket (S4 site) is the binding site of the adamantyl group; (iii) the carboxylate group of the linker contributes to the selectivity for FXa against thrombin. Thus, the combination of the knowledge of the X-ray crystal structure of the target molecule with MCSS and CAVEAT linker search techniques proved to be an effective hit-finding method that does not require the screening of huge compound libraries.     

Investigation of the ion dose non-uniformity caused by sheath-lens focusing effect on silicon wafers

The ion dose non-uniformity induced on the wafer surface by modal and discrete focusing effects is investigated for different plasma densities and implantation parameters. Measured impact radius agrees well with values obtained by simulation. The optical pattern observed on the wafer surface is correlated with the ion dose by FT-IR measurements. The applicability of a previously proposed vertical ring is demonstrated, the ring being able to considerably improve the ion flux uniformity by shifting the discrete focusing effect out of the wafer surface and reducing the modal focusing. Experiments are performed in an inductively coupled plasma produced in hydrogen.     

Debye-Waller parameters of diatomic crystals

The Debye-Waller parameters, the effective valuesB _eff, the dynamic component,B _d, and the static component,B _s, of each constituent atom and also of the bulk were measured for some diatomic crystals with NaCl- and zinc blende-type structures. The dominant effect of heavy constituent atoms on the dynamic component of bulk crystals was found, and the mean square displacement in bulk crystals was approximated well by the atomic mass averaged mean square displacements of the constituent atoms. A remarkable effect of structural defects onB _eff, particularly onB _s, was observed in NiO samples with different degrees of non-stoichiometry. The different extents of the SiC-forming reaction between solid carbon and fused silicon resulted in quite differentB _eff values; the larger theB _eff value the smaller the extent of the reaction.