Determination of ethychlozate and its degradation product in fruits by HPLC and LC/MS

A method was developed for the analysis of ethychlozate (CIE) and its decomposition compound, 5-chloro-3(1H)-indazolylacetic acid (CIA) in fruits by HPLC and LC/MS. The sample was homogenized with 1 mol/L HC1, and CIE and CIA were extracted with 5 mol/L HCl and acetone. They were extracted from the acetone extract with diethylether-n-hexane (2:1). CIE was hydrolyzed to CIA with methanol-4 mol/L KOH (1:1). The solution was made acidic, and CIA was extracted with diethylether-n-hexane (2:1). The extract was cleaned up on a silica gel column. CIA was determined by HPLC-UV and LC/MS (Scan or SIR). Four fruits were spiked with CIE or CIA at 0.5 microgram/g and analyzed by the proposed method with HPLC. The average recoveries were 77.2-83.2% for CIE and 71.2-89.2% for CIA. The concentrations determined by LC/MS were 10-25% higher than the values by HPLC. The limit of detection (LOD) of CIA standard solution by HPLC corresponds to 0.015 microgram/g of CIE in the sample. In the same way, the LOD of CIA by LC/MS (SIR) corresponds to 0.009 microgram/g of CIE in the sample.     

Application of magnetic nanoparticles to gene delivery

Nanoparticle technology is being incorporated into many areas of molecular science and biomedicine. Because nanoparticles are small enough to enter almost all areas of the body, including the circulatory system and cells, they have been and continue to be exploited for basic biomedical research as well as clinical diagnostic and therapeutic applications. For example, nanoparticles hold great promise for enabling gene therapy to reach its full potential by facilitating targeted delivery of DNA into tissues and cells. Substantial progress has been made in binding DNA to nanoparticles and controlling the behavior of these complexes. In this article, we review research on binding DNAs to nanoparticles as well as our latest study on non-viral gene delivery using polyethylenimine-coated magnetic nanoparticles.     

Thick films for multilayer substrates

Abstract

Low temperature fired ceramics based on alumina/glass added oxide ceramics have been developed and are being used by several companies as substrates for high density assembled modular packaging.^1–3 The features of low temperature fireable substrates are the cofireability with highly conductive metals such as Ag, Ag-Pd, or Cu, and the cofireability with other passive component materials for L, C, R and relatively low dielectric constant elements. But most of these substrates have the disadvantage that their thermal expansion coefficient is not perfectly compatible with Si or GaAs. This paper reports the results of a newly developed cordierite/glass based substrate employing Cu as the surface and internal conductors and having the freedom of tuning the thermal expansion coefficient by changing the composition. The ceramic composition with adjustable thermal expansion coefficient value of 3 to 7 ppm/°C can be manufactured and easily matched with the thermal expansion coefficient of Si or GaAs without a big change of electrical performance.     

Exponential ARX model-based long-range predictive control strategy for power plants

For nonlinear thermal power plants whose dynamics vary with load demand, a load-dependent exponential ARX (Exp-ARX) model, which can effectively describe the nonlinear properties of the plants, is presented. The Exp-ARX model requires only off-line identification. Based on the model, a constrained multivariable generalized predictive control (CMGPC) strategy is designed and implemented in a simulation of 375 MW thermal power plants. This CMGPC algorithm does not resort to on-line parameter estimation and can more exactly predict the future outputs of the nonlinear plants, so it shows better reliability and control performance than the usual GPC algorithm.     

A new method for treating fluorine wastewater to reduce sludge andrunning costs

Reduction of the sludge generated in fluorine wastewater treatment is a critical problem for the semiconductor industry. We have developed a new method for treating fluorine wastewater in order to reduce sludge and running costs. This method utilizes a small amount of Al(OH)₃ not only as an aggregator for CaF₂ generated from fluoride ions in the wastewater but also as an effective fluorine adsorbent. The Al(OH)₃ as fluorine adsorbent is used repeatedly through an AI(OH)3 reclamation process. This method can effectively treat the concentrated fluorine wastewater to achieve an exceedingly low concentration in one-step treatment. We constructed a practical treatment system using this method by modifying part of an existing conventional system. This new treatment system is able to reduce both the total sludge and running costs to about one-tenth those of a conventional system     

Oxidation kinetics of low-oxygen silicon carbide fiber

The effect of partial pressure and temperature on the oxidation rate of low-oxygen silicon carbide fiber (Hi-Nicalon) has been investigated. The initial oxidation rate was described by a two-dimensional disc contracting formula for reaction control, and the activation energy was 155 kJ/mol. The rate at the later stage of oxidation obeyed the equation for diffusion control, and the activation energy was 109 kJ/mol. Both the rate constants were proportional to oxygen partial pressure. The diffusion species through the SiO₂ film are considered to be oxygen molecules.     

Thermodynamic,transport and radiation properties of high-temperature CF3I and transient conductance of residual arc sustained in axial CF3I flow

The present paper reports fundamental properties of CF₃I under high-temperature conditions to find out the usefulness of CF₃I as an arc-quenching gas. Firstly, particle compositions of CF₃I were theoretically calculated in a temperature range from 300 to 30 000 K. Secondly, thermodynamic, transport and radiation properties of the CF₃I were also obtained for pressures 0.1–1.0 MPa. Finally, the transient process of a conductance of a residual arc in CF₃I was derived to compare with those in other arc-quenching gases. In addition, an arc extinguishing capability of CF₃I in a thermal re-ignition region was derived to find out whether CF₃I shows a higher capability than CO₂, N₂ and air. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Required limiting impedance and capacity of fault current limiter installed in customer system with synchronous generator

We investigated the required limiting impedance and capacity of a fault current limiter (FCL) installed at an incoming feeder of a customer system with a synchronous generator in a utility distribution system. It was assumed that two types of FCL were installed, i.e. a resistive type (R‐type) FCL and an inductive type (L‐type) FCL. A fault current out of the customer system and a voltage in the customer system were calculated following a three‐phase, short‐circuit fault occurrence. It was found that the required type of FCL and the required limiting impedance depended on the rated capacity of the generator in order to obtain the suppression of the fault current under 0.1 kA_S and to maintain of customer voltage between 85 and 100% of the nominal voltage (6.6 kV). The capacity of FCL consisting of the smallest limiting impedance is discussed. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Structural determination of subsidiary colors in commercial Food Green No. 3 (fast green FCF, FD & C Green No. 3).

HPLC analysis revealed that eight subsidiary colors existed in commercial Food Green No. 3 (fast green FCF, FD & C Green No. 3). Among them, four subsidiary colors C, F, G, and H were isolated by using preparative HPLC and their structures were determined by MS and NMR. They were the disodium salt of 2-[[4-[N-ethyl-N-(3- sulfophenylmethyl)amino]phenyl][4-[N-ethyl-N-(4- sulfophenylmethyl)amino]phenyl]methylio]-4-hydroxybenzenesulfonic acid (abbreviated as m,p-G-3), the sodium salt of 2-[[(4-N-ethylamino)phenyl][4-[N-ethyl-N-(3- sulfophenylmethyl)amino]-phenyl]methylio]-4-hydroxybenzenesulfonic acid [abbreviated as HSBA-(EA) (m-EBASA)], the sodium salt of 2-[[(4-N-diethylamino)phenyl][4-[N-ethyl-N-(3- sulfophenylmethyl)amino]phenyl]-methylio]-4-hydroxybenzenesulfonic acid [abbreviated as HSBA-(di-EA) (m-EBASA)], and the sodium salt of 2-[[4-[N-ethyl-N-(phenylmethyl)amino]phenyl][4-[N-ethyl-N-(3- sulfophenylmethyl)-amino]phenyl]methylio]-4-hydroxybenzenesulfonic acid [abbreviated as HSBA-(EBA)(m-EBASA)], respectively. HSBA-(di-EA) (m-EBASA) was a subsidiary color newly found in commercial Food Green No. 3.     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.