A molten metal jet impingement on a flat spreading surface

ABSTRACT

In the event of a severe accident, past experiences such as Three Mile Island and Fukushima Daichi have shown that the reactor core of a light-water nuclear reactor, if not properly safeguarded, could go through a meltdown. This will be followed by the formation of a corium, a mix of molten fuel elements, and liquid metals from the Reactor Pressure Vessel (RPV). In the worst-case scenario, a melt through from the RPV can occur and lead to the spreading of the corium, in the form of a molten element’s jet impinging on a flat concrete structure of the Primary Containment Vessel (PCV). To enhance the decommissioning and the safety procedure, scope of the present article is to deepen the understanding of the phenomena involved in the mentioned scenario, mainly jet-instability and molten material spreading. In the present study, experiments were carried out, by using corium simulant materials such as Copper and Tin, to investigate the link between the instability of the gravity-driven molten metal jet and the impinging followed by its spreading over a flat area.     

Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication

Water lubrication using diamond-like carbon (DLC) coatings is regarded as being a promising eco-friendly technology. However, it has been reported that delamination of DLC coatings occurs in water. The authors clarified that the application of friction in ambient air prior to self-mating DLC water lubrication, in addition to the suppression of DLC delamination, caused the friction coefficient to decrease more than when no processing is performed in the boundary lubrication region. When compared to the case when there was no pre-sliding, in terms of the wear scar, in this case, a much more hydrophilic and smoother surface was formed. Therefore, the friction-reducing process in water due to the presence of a sliding history (pre-sliding in ambient air) was clarified by an analysis of the DLC geometry, structure, chemical state and an in situ analysis that can measure the friction properties and the chemical state of DLC. We clarified that the process in which the oxidation and structural changes of the DLC proceed at the time of pre-sliding in ambient air using in situ Fourier transform infrared spectroscopy–attenuated total reflection. It was also revealed that the OH termination subsequently accelerated rapidly due to the friction in water after pre-sliding process. In addition, a time-of-flight secondary ion mass spectrometry analysis revealed that this OH group was derived from the lubricating water and unlike the case in which there was no pre-sliding in ambient air, the rate at which OH terminates increased considerably.     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Evaluation of the Anti-Proliferative Activity of Rare Aldohexoses against MOLT-4F and DU-145 Human Cancer Cell Line and Structure-Activity Relationship of D-Idose

D-Allose (D-All), a C-3 epimer of D-glucose (D-Glc), is a naturally rare monosaccharide, which shows anti-proliferative activity against several human cancer cell lines. Unlike conventional anticancer drugs, D-All targets glucose metabolism and is non-toxic to normal cells. Therefore, it has attracted attention as a unique “seed” compound for anticancer agents. However, the anti-proliferative activities of the other rare aldohexoses have not been examined yet. In this study, we evaluated the anti-proliferative activity of rare aldohexoses against human leukemia MOLT-4F and human prostate cancer DU-145 cell lines. We found that D-All and D-idose (D-Ido) at 5 mM inhibited cell proliferation of MOLT-4F cells by 46 % and 60 %, respectively. On the other hand, the rare aldohexoses at 5 mM did not show specific anti-proliferative activity against DU-145 cells. To explore the structure–activity relationship of D-Ido, we evaluated the anti-proliferative activity of D-sorbose (D-Sor), 6-deoxy-D-Ido, and L-xylose (L-Xyl) against MOLT-4F cells and found that D-Sor, 6-deoxy-D-Ido, and L-Xyl showed no inhibitory activity at 5 mM, suggesting that the aldose structure and the C-6 hydroxy group of D-Ido are important for its activity. Cellular glucose uptake assay and western blotting analysis of thioredoxin-interacting protein (TXNIP) expression suggested that the anti-proliferative activity of D-Ido is induced by inhibition of glucose uptake via TXNIP-independent pathway.     

Design of carrier tRNAs and selection of four-base codons for efficient incorporation of various nonnatural amino acids into proteins in Spodoptera frugiperda 21 (Sf21) insect cell-free translation system

Spodoptera frugiperda 21 (Sf21) insect cell-free protein synthesizing system was expanded to include nonnatural amino acids. Orthogonal tRNAs that work as carriers of nonnatural amino acids in the insect system were explored. Four-base codons for assigning the positions of nonnatural amino acids were also selected. Mutated streptavidin mRNAs that contained different four-base codons were prepared and added to the insect cell-free system in the presence of various tRNAs possessing the corresponding four-base anticodons. The tRNAs were chemically aminoacylated with various types of nonnatural amino acids to examine their incorporation efficiencies. Using p-nitrophenylalanine as the nonnatural amino acid and streptavidin as the target protein, tRNA sequences and the types of four-base codons were optimized to maximize the yield of the nonnatural mutant and to minimize production of full-length proteins that do not contain the nonnatural amino acid. Among the tRNA sequences taken from a variety of tRNAs of nonstandard structures, the tRNA derived from Methanosarcina acetivorans tRNA(Pyl) was the most efficient and orthogonal tRNA. Of the CGGN-type four-base codons, CGGA and CGGG were the most efficient ones for assigning the positions of nonnatural amino acids. p-Nitrophenylalanine and 2-naphthylalanine were efficiently incorporated as in the case of Escherichia coli and rabbit reticulocyte cell-free systems. Much less efficient incorporation was observed, however, for other nonnatural amino acids, indicating that the insect system is less tolerant to the structural diversity of amino acids than the E. coli cell-free system.     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. III. Adhesive Joint Strengths of Grafted Power Feed Copolymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. Power feed copolymer had a very broad glass transition temperature compared with random copolymer, even if grafting and/or crosslinking were introduced to the system. This tendency was almost the same as the non-grafted power feed copolymer where only low molecular weight surfactant was used.

Adhesive joint strengths of power feed copolymers were evaluated compared with random copolymers. In the case of usual linear power feed copolymer, the adhesive joint strengths were not higher than those of random copolymer, which was considered to be due to the lower film strengths of the power feed copolymer. Power feed copolymer having grafting showed slightly higher adhesive joint strengths over a wide range of temperatures than random copolymer. When crosslinking was introduced to the system, power feed copolymer showed much higher adhesive joint strengths over a wide temperature range.     

Properties of EHD Pump with Combination of Rod-to-Rod and Meshy Parallel Plates Electrode Assemblies

A high pressure required to drive the liquid can be generated by the compact electrohydrodynamic (EHD) pumps with multiple pairs of the rod-to-rod and meshy parallel plates electrode assemblies arranged in series. In this work, the performance of EHD pumps with electrodes up to nine pairs has been examined as a function of the applied voltage using a semi-insulating liquid. The pressure generated by energized electrodes gives rise to the vigorous liquid flow and the liquid ejects from the pump outlet. The flow direction always is from the cathode toward the anode. The pressure increases with nearly the square of the applied voltage and in proportion to the number of electrode pairs. The maximum pressure head achieved with a series of nine electrode pairs is 25.3 kPa at 18 kV with maximum power consumption of 7.2 W. The generated pressure is maintained stably at constant level of the corresponding value. EHD pumping is attributed to conduction pumping based on an unbalance of heterocharges with single ionic polarity in the vicinity of the anode and cathode.     

Growth and differentiation potentials in confluent state of culture of human skeletal muscle myoblasts

The transitional behaviors of myoblasts toward differentiation were investigated in the cultures at the low and high seeding densities (respectively, X₀ = 1.0 × 10³ and 2.0 × 10⁵ cells/cm²). In the culture at the low seeding density, an increase in confluence degree accompanied a decrease in growth potential (R_p), being R_p = 0.85 and 0.11 at t = 48 and 672 h, respectively. Myoblasts seeded at the high density resulted in the immediate cessation of growth with keeping the low range of R_p = 0.02–0.09 throughout the culture. The reduction of R_p led to the generation of three subpopulations of cells in proliferative, quiescent and differentiated states. Close cell contacts in the confluent state of high seeding culture induced cell quiescence to a higher extent with suppressing differentiation.     

Flight Model Performance of 640-GHz Superconductor–Insulator–Superconductor Mixers for JEM/SMILES Mission

Performances of 640-GHz Superconductor–Insulator–Superconductor (SIS) mixers developed for the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) mission are described. SMILES, launched in September 2009, is the first mission to observe atmosphere from space using superconducting mixers. Ground test performances of the SIS mixers show very flat gain and noise characteristics in their observation bands in compliance with the specifications required for SMILES.