Internal oxidation in gold alloys containing small amounts of Fe and Sn

Internal oxidation was observed in gold-rich alloys as substrates for porcelain veneers in dental restorations, which contain small amounts of Fe and Sn. The internal oxidation proceeded with oxygen ions diffusing to the inner part of the alloy through Fe₂O₃ formed at the grain boundaries of the alloy matrix. SnO₂ was formed internally together with the Fe₂O₃. The external oxidation zone was composed of only Fe₂O₃ in a wide range of Fe and Sn concentrations. Fe₃O₄ was formed with Fe₂O₃ in the Sn-rich composition range by reduction of Fe₂O₃ in the presence of Sn. A band mainly composed of SnO₂ was formed at the inside of the internal oxidation zone in the composition range where Fe₃O₄ formed. In the Sn-rich alloys this internal oxidation band of SnO₂ moved to the external oxidation zone.     

Calculated effect of radially asymmetric heat generation on temperature and heat flux distribution in a fuel rod

The effect of radially asymmetric heat generation on the temperature and heat flux distribution in a fuel rod is evaluated. Based on practical assumptions, the temperature distribution in power reactor fuel can be obtained between reasonable limits by solving the steady-state heat conduction equation with asymmetric heat generation.     

Characterization of polymer films using a slow positron beam

Polymer structures have been investigated using positron annihilation lifetime spectroscopy (PALS) with a slow positron beam as well as a conventional radioactive source (²²Na). The properties of the free volume holes near the polymer surface were studied as a function of the positron implantation energy. The longest lifetime was associated with ortho-positronium (o-Ps) annihilation in the free volume holes. In polytetrafluoroethylene film, the lifetime of o-Ps was observed to decrease with increasing positron implantation depth, and a significant change in the o-Ps lifetime was found at a short distance (about 10 nm) from the surface, while its intensity increased. This result implies that near the polymer surface the free volume holes become larger that in the bulk. The effect of temperature on the polymer sub-surface layers was also studied. For high molecular weight polystyrene, the glass transition temperature for the sub-surface was lower than that for the bulk and thermal expansion coefficient of the sub-surface layers was found to be larger than the bulk value. Electronic Publication     

Trunk motion control during the flight phase while hopping considering angular momentum of a humanoid

In previous studies, various stabilizing control methods for humanoids during the stance phase while hopping and running were proposed. Although these methods contribute to stability while hopping and running, it is possibility that the control during the flight phase could also affect the stability. In this study, we investigated whether the control during the flight phase can affect the stability of a humanoid while running. To achieve stable hopping, we developed a control system that accounts for the angular momentum of the whole body during the flight phase. In this system, the angular momentum generated by the motion of the lower body in each time interval is calculated during the flight phase, and the trunk joints are controlled to generate the angular momentum necessary to compensate for the deviation of the waist posture, which is used as the reference point for the motion coordinate system of the robot. Once the proposed control system was developed and simulated, we found that the hopping duration in the unconstrained state was extended.     

Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

Spin Injection Processes in ZnSe-Based Double Quantum Dots of Diluted Magnetic Semiconductors

Spin injection processes in the double quantum dots of ZnSe-based diluted magnetic semiconductors are discussed. Double quantum dots are fabricated from ZnSe-based double quantum wells by electron beam lithography and wet etching. In these samples, the photo-excited carriers in the magnetic dots are injected into the non-magnetic dots. The circular polarization degrees of photoluminescence from the non-magnetic dots are measured by micro-photoluminescence measurement system under the magnetic field up to 5 T. The maximum spin polarization degrees of injected carriers determined from our experiment are 10% for double quantum wells and 15% for double quantum dots. The spin injection efficiency was estimated both from the observed circular polarization degree and the diffusion length of carriers. We concluded that the spin injection efficiency is increased in the double quantum dots.     

Quantum Phase Transition in the Infinite Dimensional Hubbard Model

We investigated the ground state of the infinite dimensional Hubbard model for both attractive and repulsive interactions by applying Gutzwiller type variational wave functions. Our variational wave functions have lower energies than the simple BCS wave function for the attractive case, and lower energies than the Brinkman-Rice state for the repulsive case. We found that the system has several phases depending on the density of electrons and the interaction strength. Investigated phases include antiferromagnetic, Fermi liquid, superconducting, charge density wave, and supersolid phases. The last one is a coexistence phase of superconducting and charge density wave states.     

Effect of different features to drill-wear prediction with back propagation neural network

In this paper, a back propagation neural network (BPNN) has been applied to predict the corner wear of a high speed steel (HSS) drill bit for drilling on different workpiece materials. Specially defined static and dynamic features extracted by a wavelet packet transform (WPT) from the resultant force converted from thrust and torque together with the cutting conditions (workpiece material, spindle speed, drill diameter, feed rate) are used as inputs to train the network to obtain a better output, drill corner wear. Drilling experiments have been carried out over a wide range and, features newly defined and conventional ones, features extracted from different frequency bands are compared.