Evaluation of performance of a commercial monoclonal antibody-based fenitrothion immunoassay and application to residual analysis in fruit samples

The performance of a commercially available enzyme-linked immunosorbent assay (ELISA) kit containing highly sensitive monoclonal antibodies against fenitrothion was assessed. The experimentally estimated dynamic range (0.087 to 2 ng/g) agreed with that established by the kit manufacturer (0.075 to 1 ng/g). The linearity of the standard curve produced for the kit-assembled standard solutions (slope = -0.3829) agreed with that of the curve produced for the self-made standard solutions (slope = -0.3619). The sensitivity (I50 value) and the limit of detection for the kit were 0.23 and 0.033 ng/g, respectively. Selectivity of the ELISA indicates that the monoclonal antibody can readily distinguish the target pesticide from other structurally related analogs and some metabolites (oxon forms), with the exception of ethyl O-(p-nitrophenyl) phenyl phosphonothionate (EPN), parathion-methyl, and parathion. Methanol was the best organic solvent for the kit, with optimal sensitivity observed at a final concentration in the well of 10% (vol/vol) or less. Matrix interferences were minimized by direct dilution with water (60-fold) of the methanolic extracts fromapple and peach samples. To extract fenitrothion from these two agricultural products as simply and rapidly as possible, three extraction methods were used. The extraction method that involved shaking by hand for 3 min was the best among the three methods. High recovery percentages (116.6% for apple and 110.8% for peach) were obtained. Validation of the ELISA method was carried out using the gas chromatography-mass spectrometry method, resulting in high recovery and close correlation of results (r > 0.95). These findings strongly suggest that the ELISA kit may be routinely employed for on-site fenitrothion screening of fruit samples.     

X-ray absorption fine structure combined with fluorescence spectrometry for monitoring trace amounts of lead adsorption in the environmental conditions

The local structure of trace amounts of lead in an adsorbent matrix that contains a high concentration of iron and magnesium (Mg6Fe2(OH)16(CO3) x 3H2O) was successfully monitored by means of X-ray absorption fine structure spectroscopy combined with fluorescence spectrometry. A eutectic mixture of PbCO3 and Pb(OH)2 coagulated when Pb2+ was adsorbed from a 1.0 ppm aqueous solution, and in contrast, the major species was ion-exchanged Pb2+ in the case of adsorption from a 100 ppb aqueous solution. The difference was ascribed to the balance between the precipitation equilibrium for coagulation and the rate of the ion exchange reaction with surface hydroxyl groups.     

Calculated effect of radially asymmetric heat generation on temperature and heat flux distribution in a fuel rod

The effect of radially asymmetric heat generation on the temperature and heat flux distribution in a fuel rod is evaluated. Based on practical assumptions, the temperature distribution in power reactor fuel can be obtained between reasonable limits by solving the steady-state heat conduction equation with asymmetric heat generation.     

Remineralization effects of xylitol on demineralized enamel

We morphologically determined the effects of xylitol on the remineralization of artificially demineralized enamel. The samples were demineralized and then immersed in a remineralizing solution with or without 20% xylitol at 37 degrees C for 2 weeks. Samples were observed using contact microradiography, a multipurpose image processor (MIP) and a high-resolution electron microscope (HRTEM). Contact microradiography indicated that remineralization occurred in the surface and deep layers of samples immersed in a non-xylitol solution. Samples immersed in a xylitol solution demonstrated less mineralization in the outer 10 microm of the outermost surface layers, but more mineralization in the middle and deep layers, than was observed in the non-xylitol samples. The MIP evaluation indicated that remineralization was more prominent in layers at depths of 50-60 microm in the xylitol samples than in the non-xylitol samples. Observation of the xylitol samples by HRTEM revealed crystals of various sizes and irregular shapes with unclear crystal angles in the outermost surface layers. In the middle layers, they had thickened and angles of crystals are clear. These results indicate that xylitol can induce remineralization of deeper layers of demineralized enamel by facilitating Ca2+ movement and accessibility.     

Colorectal Laterally Spreading Tumors by Computed Tomographic Colonography

To date, few reports focused primarily on detecting colorectal laterally spreading tumors (LSTs) have been published. The aim of this study was to determine the visibility of LSTs on computed tomographic colonography (CTC) compared with that on colonoscopy as a standard. We retrospectively reviewed and matched data on endoscopic and CTC reports in 157 patients (161 LSTs) who received a multidetector CT scan using contrast media immediately after total colonoscopy at the National Cancer Center Hospital in Tokyo, Japan, between December 2005 and August 2010. The results of the total colonoscopy were known at the time of the CTC procedure and reading. Of the 161 LSTs detected on colonoscopy, 138 were observed and matched by CTC (86%). Of the 91 granular type LSTs (LST-Gs), 88 (97%) were observed and matched, while of the 70 non-granular type LSTs (LST-NGs), 50 (71%) were observed and matched by CTC (p < 0.0001). CTC enabled observation of 73% (22/30) of 20–29 mm, 83% (35/42) of 30–39 mm, 88% (49/56) of 40–59 mm, and 97% (32/33) of ≥60 mm tumors. The rate of observed LSTs by CTC was 86% (97% of LST-G, 71% of LST-NG) of the LSTs found during total colonoscopy.