Synthesis and electrocatalytic oxygen reduction activity of graphene-supported Pt3Co and Pt3Cr alloy nanoparticles

Graphene-supported Pt and Pt₃M (M = Co and Cr) alloy nanoparticles are prepared by ethylene glycol reduction method and characterized with X-ray diffraction and transmission electron microscopy. X-ray diffraction depicted the face-centered cubic structure of Pt in the prepared materials. Electron microscopic images show the high dispersion of metallic nanoparticles on graphene sheets. Electrocatalytic activity and stability of the materials is investigated by rotating-disk electrode voltammetry. Oxygen reduction activity of the Pt₃M/graphene is found to be 3–4 times higher than that of Pt/graphene. In addition, Pt₃M/graphene electrodes exhibited overpotential 45–70 mV lower than that of Pt/graphene. The high catalytic performance of Pt₃M alloys is ascribed to the inhibition of formation of (hydr) oxy species on Pt surface by the alloying elements. The fuel cell performance of the catalysts is tested at 353 K and 1 atm. Maximum power densities of 790, 875, and 985 mW/cm² are observed with graphene-supported Pt, Pt₃Co, and Pt₃Cr cathodes, respectively. The enhanced electrocatalytic performance of the Pt₃M/graphene (M = Co and Cr) compared to that of Pt/graphene makes them a viable alternative to the extant cathodes for energy conversion device applications.     

Glass capillary optics for producing nanometer sized beams and its applications

We have developed a method to produce micro/nano meter sized beams of keV energy highly charged ions (HCIs) and MeV energy protons/He ions with tapered glass capillary optics for application of surface modifications and a biological tool called “cell surgery”, respectively. The transmission through the tapered glass capillaries with inlet diameter of 0.8 mm?, outlet diameter from 900 nm? to several tens of microns and length of about 50 mm was performed using 8/64 keV Ar⁸⁺ beams. The transmitted beams had a density enhancement of about 10 and were guided through a capillary tilted by as large as ±100 mrad. The charge state of the beams was kept during the transmission. The combination of MeV proton/He ion beams and the capillary with a thin end window at its outlet can realize pinpoint energy deposition and three-dimensional selection of the bombarding point in an arbitrary position of a living cell or in any liquid object. We demonstrated that a real biological cell, HeLa cell with the nucleus labeled by green fluorescent protein (GFP), was irradiated with the microbeam, which was prepared by 4 MeV He²⁺ entering a capillary with an end window of 7.3 μm in thickness and outlet diameter of 9.6 μm?. The transmitted MeV ion beams had density enhancement up to 1000 according to the capillary outlet sizes, which are applicable to various material analyses employing microbeams.     

Influence of Temperature Difference Calculation Method on the Evaluation of Rankine Cycle Performance简

In the new century, energy and environmental problems are becoming more critical, and the development of natural energy is desired. Low-grade Thermal Energy Conversion （LTEC） is refocused as one of the renewable energy methods. The usefulness of LTEC is expected using hot springs and waste heat. In the case of the Rankine cycle using ammonia as the working fluid, the thermal properties of the working fluid changes in the evaporator. The traditional evaluation method of heat exchanger performance is the LMTD （Logarithmic Mean Temperature Difference） method. On the other hand, the GMTD （Generalized Mean Temperature Difference） method allows the variation of thermal properties in the heat exchanger. The aim of this study is to compare the two methods for the calculation of temperature differences and the corresponding influence on the total performance of the Rankine cycle that is operated using ammonia as a working fluid. As a result, the thermal efficiency of the Rankine cycle is greater than that of the LMTD method. Moreover, the computable range of the GMTD calcula- tion method is less than that of the LMTD calculation method.     

Pulsed source of ultra low energy positive muons for near-surface μSR studies

We have produced a pulsed beam of low energy (ultra slow) polarized positive muons (LE-μ⁺) and performed several demonstration muon spin rotation/relaxation (μSR) experiments at ISIS RIKEN-RAL muon facility in UK. The energy of the muons implanted into a sample is tuneable between 0.1 keV and 18 keV. This allows us to use muons as local magnetic microprobes on a nanometre scale. The control over the implantation depth is from several nanometres to hundreds of nanometres depending on the sample density and muon energy. The LE-μ⁺ are produced by two-photon resonant laser ionization of thermal muonium atoms. Currently ∼15 LE-μ⁺/s with 50% spin polarization are transported to the μSR sample position, where they are focused to a small spot with a diameter of only 4 mm. The overall LE-μ⁺ generation efficiency of 3 × 10⁻⁵ is comparable to that obtained when moderating the muon beam to epithermal energies in simple van der Waals bound solids. In contrast to other methods of LE-μ⁺ generation, the implantation of the muons into the sample can be externally triggered with the duration of the LE-μ⁺ pulse being only 7.5 ns. This allows us to measure spin rotation frequencies of up to 40 MHz.     

Effect of α-Al/Al3Ni microstructure on the corrosion behaviour of Al-5.4 wt% Ni alloy fabricated by equal-channel angular pressing

The effect of microstructure on corrosion behaviour of an Al-5.4 wt% Ni alloy fabricated by equal-channel angular pressing (ECAP) was investigated by means of potentiodynamic polarization test. The Al-5.4 wt% Ni alloy samples were severely deformed by ECAP with two strain introduction methods of route A and route B_C and the ECAP process was repetitively carried out up to 6 passes (strain 6). The anodic polarization measurements indicated that pitting potential of the ECAPed Al-Ni alloy samples in chloride containing neutral buffer solution increased with ECAP passes. The pitting corrosion resistance of Al-Ni alloy after ECAP by route B_C was better than that by route A. It is attributable to that the size of α-Al crystal region was reduced with ECAP passes and route B_C was able to obtain more homogeneous α-Al/Al₃Ni structure than route A. On the other hand, pitting corrosion resistance of pure Al samples showed an obvious declining with increasing ECAP passes. It was indicated that more homogeneous and finer α-Al/Al₃Ni structure obtained by ECAP played a vital role on improving the corrosion resistance of Al-5.4 wt% Ni alloy.     

Recoverable shear strain of liquid crystal‐forming concentrated hydroxypropyl cellulose solutions

The recoverable shear strain (S_R) for the liquid crystal‐forming hydroxypropyl cellulose solutions was determined by means of a concentric cylinder rotational apparatus as functions of shear stress prior to recovery and concentration of the solutions at 30°C. S_R greatly depended on shear stress and concentration; the phase of the solution (the single phase or biphase) governed the dependences of S_R on stress and concentration. S_R increased with increasing stress for the single phase and decreased for the biphase. S_R seemed to be related to the die swell (B): S_R ∝ Bⁿ. S_R exhibited a maximum and a minimum with respect to concentration. S_R for the cellulosic cholesteric liquid crystalline solutions was greater than that for the isotropic solutions. A model was proposed for explaining the greater S_R. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 865–872, 2002     

A study on a porous residential building model in hot and humid regions: Part 1—the natural ventilation performance and the cooling load reduction effect of the building model

This study targets environmental load reduction in hot and humid regions. It reveals the effects that porous residential buildings have on the natural ventilation performance and, consequently, the cooling load reduction. Two residential building models, namely a model with a void ratio of 0% and a model with a void ratio of 50%, are evaluated using computational fluid dynamics (CFD) analysis and thermal and airflow network analysis. The analysis on components of the heat load indicates that improvements in the natural ventilation performance would significantly reduce the cooling load.     

Evolutionary design of dynamic neural networks for evaporator control

This paper presents a novel neural network (NN) to control an ammonia refrigerant evaporator. Inspired by the latest findings on the biological neuron, a dynamic synaptic unit (DSU) is proposed to enhance the information processing capacity of artificial neurons. Treating the dynamic synaptic activity after the nonlinear somatic activity helps to capture the dynamics demarcated by the Gaussian activation pertaining to the input space. This practice leads to a remarkable reduction in curse of dimensionality. The proposed NN architecture has been compared with two other conventional architectures; one with dynamic neural units (DNUs) and the other with nonlinear static functions as perceptrons. The objective is to control evaporator heat flow rate and secondary fluid outlet temperature while keeping the degree of refrigerant superheat in the range 4–7 K at the evaporator outlet by manipulating refrigerant and evaporator secondary fluid flow rates. The drawbacks of conventional approaches to this problem are discussed, and how the novel method can overcome them are presented. An evolutionary approach is adopted to optimize the parameters of the NN controllers. Then evaporator process model is accomplished as a combination of governing equations and a sub NN resulting in a simple and sufficiently accurate model. The effectiveness of the proposed dynamic NN controller for the evaporator system model is validated using experimental data from the ammonia refrigeration plant.     

A reduction method of dynamic false contour utilizing the frame‐rate‐control method with suppression of the side effect on PDPs

Abstract— The plasma‐display panel (PDP) is a type of flat‐panel display that can display a high‐quality image. However, when moving images are displayed, annoying disturbances such as false contour noise occurs. This noise is called dynamic false contour (DFC). To achieve a higher‐quality image, DFC has to be reduced. Therefore, a new method to reduce DFC is proposed. To find a way to reduce DFC, a new evaluation value for it has been defined: the evaluation value of dynamic false contour (EVDFC). This value is defined on the basis of a person's subjective evaluation. By applying this value, the cause that generates DFC can be identified. On the basis of these studies, a new method for reducing DFC by applying frame‐rate control (FRC) with suppression of the side effect is proposed. This improved method can be used to provide high‐quality images.