Synthesis, characterization and hydrolysis of aromatic polyazomethines containing non-coplanar biphenyl structures

New polyazomethines containing electron-withdrawing trifluoromethyl group and non-coplanar biphenyl structures were prepared at room temperature under reduced pressure. It was found that these polyazomethines would undergo hydrolysis in DMSO solution at temperature higher than 50 °C. The hydrolysis, evidenced by ¹H NMR spectra and GPC chromatograms, was resulted from the reverse reaction of azomethine formation and was facilitated at higher temperature. The GPC results also suggested that post-polymerization would be possible if polyazomethine films were heated at elevated temperature (200 °C) under reduced pressure (0.27 torr). The HOMO (−5.69 to −5.96 eV) and LUMO (−3.04 to −3.18 eV) energy levels of the new polyazomethines are much lower than those of other polyazomethines. Combined with the excellent solubility and good thermal stability, non-coplanar biphenyl structure containing electron-withdrawing trifluoromethyl group could be a new candidate as electron acceptor for the structure design of new conjugated polymers.     

Two-stage thermally induced stable colloidal assemblies from PAAc/PNIPAAm/mPEG graft copolymer in water

A facile approach of forming stable polymeric complexes by the two-stage phase transition of the graft copolymer comprising poly(acrylic acid) (PAAc) as the backbone and poly(N-isopropylacrylamide) (PNIPAAm) and monomethoxy poly(ethylene glycol) (mPEG) as the grafts in water was illustrated. Rather loose and hydrated polymeric aggregates with a characteristic hydrophobic multicore structure, achieved by the first-stage thermally induced phase transition of PNIPAAm grafts, underwent the core structure rearrangement (including multicore fragmentation and fusion) upon the second-stage dehydration of mPEG grafts at 90 °C. This was followed by hydrogen-bond pairings of mPEG and PNIPAAm chain segments with unionized AAc residues acting as an effective protective shell against potential hydration of the hydrophobic inner cores during the annealing process. The polymer complexes thus obtained show surprisingly enhanced hydrophobicity of inner cores at 25 °C in water and excellent stability of the morphological structure in response to the temperature disturbance.     

A novel and rapid fabrication for microlens arrays using microinjection molding

This work reports a novel and effective procedure for manufacturing the mold insert of microlens arrays. First, the microlens arrays master is formed using room‐temperature imprint lithography and photoresist reflow process. Next, electroforming is carried out to fabriccate the metal mold insert from the master. Finally, microinjection molding is used to replicate the molded microlens arrays. The 200 × 200 arrays of molded microlens, with a diameter of 150 μm, a pitch of 200 μm, and a sag height of 11.29 μm for polycarbonate (PC) material and 11.24 μm for polymethylmethacrylate (PMMA) material have been successfully fabricated. The moldability for PMMA material is better than PC material on molded microlens arrays. The average surface roughness of the molded microlens arrays is 4.53 nm for PMMA material and 4.81 nm for PC material. The mold temperature is the most important processing factor for the focal length and sag height of molded microlens arrays. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Characterization of the morphology and hydrophilicity of chitosan/caffeic acid hybrid scaffolds

The morphology and affinity of a scaffold influence the attachment of cells to its surfaces. In this study, the morphology and hydrophilicity of chitosan/caffeic acid hybrid scaffolds were investigated. Grafting caffeic acid onto chitosan hybrid scaffolds by using high levels of potassium persulfate produced scaffolds with looser morphology and higher porosity, as indicated by scanning electron microscopy (SEM) and porosity analysis. SEM analysis showed that the prepared scaffolds had a macroporous morphology with interconnected pores. Differential scanning calorimetry (DSC) revealed that the scaffolds’ hydrophilicity decreased after caffeic acid grafting. The scaffolds were cultured with human osteosarcoma UMR-106 cells, but SEM analysis showed that cell attachment was poor. However, calcification of the scaffolds promoted the attachment of UMR-106 cells onto the scaffold. This study shows that calcified chitosan/caffeic acid hybrid scaffolds could be suitable for use in hard-tissue engineering.     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002     

MONITORING THE HYDROGEN RELEASE FROM COAL LIQUID SOLVENTS USING A HYDROGEN PROBE

A hydrogen probe made of nickel tubing has been used to monitor the release of hydrogen from coal liquid solvents at elevated temperatures and pressures. A knowledge of this release rate is helpful in determining the overall hydrogen balance for coal liquefaction operations, in choosing among alternative solvents and in evaluating the validity of model compounds. The hydrogen release was found for coal liquids to reach a constant value when the reactor temperature was steady. In the case of some model compounds the amount of hydrogen released continued to increase and equilibrium was not attained during a 10 hours measurement period. For the coal liquids the total pressure of the system was found to increase sharply with time indicating the production of gases other than hydrogen, while for the model compounds the total pressure increases were almost parallel to the increases of the hydrogen partial pressure. A correlation was developed for the percentage of hydrogen released with the aromatic fraction distribution in the coal liquids. The hydrogen probe was a valuable instrument for continuously following the hydrogen changes in these dehydrogenation experiments.     

Polypropylene composites. II: Structure-property relationships in two- and three-component polypropylene composites

Two- and three-component polypropylene (PP) blends and composites were prepared to study their structure/property relationships. Butadiene-styrene (BDS) copolymers of low compatibility formed large particles of poor adhesion in PP resulting in inferior mechanical properties. Better miscibility of ethylene-propylene-diene (EPDM) elastomer results in more finely dispersed particles and the experimental results indicate a transition to an interpenetrating network (IPN)– like structure with increasing elastomer content. Effective impact modification can be achieved only with EPDM elastomers of sufficient miscibility. Mutual wettability and adhesion of the components determine the structure and properties in PP/elastomer/filler systems. Modification of PP by acrylic acid grafting promotes PP/filler adhesion which, in turn, results in the separate dispersion of the components. In an unmodified PP matrix, a significant amount of the filler is encapsulated by the elastomer. At low filler content, better low temperature impact strength is achieved in the case of separately dispersed components, while encapsulation is more advantageous at high filling grades.     

An ergonomic study of visual optimization by light color managements

Light‐emitting diodes (LEDs) have the advantage of controllable light colors and provide the optimal lighting quality against various color attributes required in different environments. However, from the humanized design point of view, beside satisfying physical demands of people, it is also important to achieve satisfaction. With a good match between the LED lighting equipment and ambient colors, the space imagery that complies with psychological needs of human beings can be found. This is expected to become a new market direction for future lighting. In this study, the LED light source feature of adjustable correlated color temperature is used to match wall colors of typical commercial spaces and for the investigation and analysis of the impact of colors of light sources and environments on human beings. The measures of mental and subjective feelings of a group of people under various circumstances have also been investigated. Multivariate analysis of variance has been conducted on three color temperatures of light sources, six wall colors, and measures of five emotion adjectives, and the correlation between these three variables has been further investigated. © 2014 Wiley Periodicals, Inc. Col Res Appl, 41, 72–84, 2016