An 8.1-ns Column-Access 1.6-Gb/s/pin DDR3 SDRAM With an 8:4 Multiplexed Data-Transfer Scheme

Three circuit techniques for an 8.1-ns column-access 1.6-Gb/s/pin 512-Mb DDR3 SDRAM using 90-nm dual-gate CMOS technology were developed. First, an 8:4 multiplexed data-transfer scheme, which operates in a quasi-4-bit prefetch mode, achieves a 3.17-ns reduction in column-access time, i.e., from 11.3 to 8.13 ns. Second, a dual-clock latency counter reduces standby power by 22% and cycle time from 1.7 to 1.2 ns. Third, a multiple-ODT-merged output buffer enables selection of five effective-resistance values Rtt (20, 30, 40, 60, and 120 Omega) without increasing I/O capacitance. Based on these techniques, 1.6-Gb/s/pin operation with a 1.36-V power supply and a column latency of 7 was accomplished     

Using bottom surface reflectance to map coastal marine areas: a new application method for Lyzenga's model

Remote sensing is widely used in coastal management. Lyzenga's model has been traditionally used to explain the relationship between bottom surface reflectance and the radiance level measured by satellite. Due to its central assumption, this model lacks accuracy compared with the other radiative transfer models. Nonetheless, it enables, with a single and simple equation, representation of the multiple optical processes taking place in coastal areas. Mapping processes associated with this model may include radiometric correction, a technique previously pointed out as a major driver of mapping accuracy. Radiometric correction is generally based on a depth-invariant index, efficient for clear waters (Jerlov water type I to II) but largely unsuitable when transparency decreases (Jerlov water type II to III). In order to overcome this problem, we developed a new index for radiometric correction, which combines bathymetry data with attenuation coefficients. The improved efficiency of our model with regard to the traditional depth invariant index was demonstrated through two case studies: Funakoshi Bay (Japan; Jerlov water type II) and the Gabes Gulf part located off Mahares (Tunisia; Jerlov water type II to III).     

1.8-V 800-Mb/s/pin DDR2 and 2.5-V 400-Mb/s/pin DDR1 compatibly designed 1Gb SDRAM with dual-clock input-latch scheme and hybrid multi-oxide output buffer

This paper describes three circuit techniques for a DDR1/DDR2-compatible chip architecture designed for both high-speed and high-density DRAMs: 1) a dual-clock input-latch scheme, which reduces the excessive timing margin for random input commands by using a pair of latch circuits controlled by dual-phase one-shot clock signals, achieves a 0.9-ns reduction in cycle time from 3.05 to 2.15 ns; 2) a hybrid multi-oxide output buffer reduces the area penalty of the output buffer caused by compatible chip design from 1.35% to 0.3%; and 3) a quasi-shielded distributed data transfer scheme enables a 2.6-ns reduction in access time to 10.25 ns in both 2-b and 4-b prefetch operations. By using these techniques, we developed a 175.3-mm/sup 2/ 1-Gb SDRAM that operates as an 800-Mb/s/pin DDR2 or 400-Mb/s/pin DDR1.     

Preparation of Lead Lanthanum Zirconate Titanate (PLZT, (Pb,La)(Zr,Ti)O3) Fibers by Sol-Gel Method

Lead lanthanum zirconate titanate (PLZT, (Pb,La)(Zr,-Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n -propoxide, and titanium isopropoxide that contained 2-methoxyethanol as the solvent. The sols obtained from the solution were concentrated at 156°-174°C for 2 h. Concentration at higher temperatures resulted in more-viscous sols of higher specific gravities. The concentration resulted in the formation of spinnable sols, which had viscosities >10⁵ mPas and exhibited Newtonian flow properties. These spinnable sols were formed to be so stable that no change in viscosity and spinnability was observed for more than three months when stored in a sealed container at room temperature. Gel-to-ceramic fiber conversion was investigated by means of X-ray diffractometry, infrared spectroscopy, and thermal analysis. Single-phase perovskite PLZT ceramic fibers 5-200 μm in diameter and >20 cm in length were obtained. Scanning electron microscopy (SEM) observation and Brunauer-Emmett-Teller (BET) measurement showed that heat treatment of the fibers at a lower rate resulted in the formation of fibers of denser microstructure. Although the SEM image of the cross section of the fibers revealed a relatively dense microstructure and a laser beam could be transmitted through a fiber 6 mm in length, BET measurement of the fibers indicated that the fibers had more than a few percent of open porosities, and scattering of light was observed in the laser-beam guiding test.     

Administration of docosahexaenoic acid influences behavior and plasma catecholamine levels at times of psychological stress

The purpose of the present research was to clarify the effect of docosahexaenoic acid (DHA) intake on behavior and plasma catecholamines (CA). In Study 1, 42 students took either DHA-rich oil capsules containing 1.5–1.8 g DHA/d or control oil capsules containing 97% soybean oil plus 3% of another fish oil for 3 mon in a double-blind fashion. They took a psychological test (PF Study) at the start and end of the study. This study started at the end of summer vacation and ended just before the final exams. In the control group, external aggression (aggression against others) in PF Study was significantly increased at the end of the study as compared with that measured at the start (+8.9%), whereas it was not significantly changed in the DHA group (?1.0%). In a similar double-blind study (Study 2), we measured external aggression under nonstressful conditions. External aggression slightly decreased in the control group, whereas there were no significant changes in the DHA group. In Study 3 with 14 students, plasma CA were measured at the start and end of capsule administration period of 2 mon. Subjects were under continuous stress of the final exams that lasted throughout the whole study period. The ratio of plasma epinephrine to norepinephrine concentrations was significantly increased in the DHA group (78%), whereas it stayed at the same level in the control group. In Study 4, mice were fed either DHA-deficient diet or -sufficient diet for 4 wk, and their rearing frequency (an anxiety index) was measured. In the DHA-sufficient group, the rearing frequency was significantly less than in the other group. These effects of DHA intake may be applied to people in an attempt to ameliorate stress-related diseases.     

The initial step of the thermal unfolding of 3-isopropylmalate dehydrogenase detected by the temperature-jump Laue method

A temperature-jump (T-jump) time-resolved X-ray crystallographictechnique using the Laue method was developed to detect small,localized structural changes of proteins in crystals exposedto a temperature increase induced by laser irradiation. In achimeric protein between thermophilic and mesophilic 3-isopropylmalatedehydrogenases (2T2M6T), the initial structural change uponT-jump to a denaturing temperature (~90°C) was found tobe localized at a region which includes a ß-turn and aloop located between the two domains of the enzyme. A mutant,2T2M6T-E110P/S111G/S113E, having amino acid replacements inthis ß-turn region with the corresponding residues ofthe thermophilic enzyme, showed greater stability than the originalchimera (increase of T_m by ~10°C) and no T-jump-inducedstructural change in this region was detected by our method.These results indicate that thermal unfolding of the originalchimeric enzyme, 2T2M6T, is triggered in this ß-turn region.     

Estimation of concentrations of antifungal agents allowed as food additives in foods and their daily intake based on official inspection results in Japan in fiscal year 1998

The mean concentrations and daily intake of four antifungal agents were estimated based on the results of an analysis of 7,005 samples of food obtained in official inspections by Japanese local governments in fiscal year 1998. The mean concentration of diphenyl was 0.0004% of the allowable limit, and those of imazalil, o-phenylphenol, and thiabendazole were 14.0%, 3.5%, and 5.7%, respectively. The daily intakes of these antifungal agents per person, estimated from their concentrations and the daily consumption of the foods, were 0.000326, 1.89, 11.5, and 23.3 micrograms, respectively, and assuming a body weight of 50 kg, the amounts of these antifungal agents consumed were 0.000013%, 0.15%, 0.12%, and 0.47% of the acceptable daily intake, respectively. These values are similar to the values obtained on the basis of the results of the official inspection in fiscal years 1994 and 1996, except that the amount of diphenyl is much lower (1/100).     

Start‐Up Characteristics of Segmented‐In‐Series Tubular SOFC Power Modules Improved by Catalytic Combustion at Cathodes

For large‐scale SOFC power generation systems, a shorter start‐up time of SOFC cell stacks with relatively large heat capacity is one of the most important technological issues to determine the flexibility in SOFC system operation. In this study, start‐up procedures have been examined to shorten the start‐up time period. The conventional heating procedure using pre‐heated hot air and self‐heating by SOFC operation at low temperatures had a difficulty to shorten the start‐up time period because of the limitation in power generation at lower temperatures. In this study, as an alternative start‐up procedure, catalytic combustion at the SOFC cathodes is, for the first time, demonstrated to be useful on the system level. The applicability of the catalytic combustion to shorten the start‐up time period has been verified numerically as well as experimentally by using a large‐scale cell stack cartridge. This unique start‐up procedure enables to operate SOFC‐based large‐scale power generation systems.     

Simulation of migration from a multi-layer laminated film intended for retort foods

Migration from multi-layer laminated film pouches intended for retort foods was investigated through HPLC analysis with a fluorescence detector, and measurements of residue on evaporation, consumption of potassium permanganate and total organic carbon. HPLC analysis revealed that the levels of migrants in oil and the water which were heated in the pouches (121 degrees C, 30 min) were ten times of those in the corresponding official simulants under the official conditions; n-heptane (25 degrees C, 60 min), and water (95 degrees C, 30 min). Bisphenol A diglycidyl ether and related compounds were found in the oil and the water heated in the pouches, as well as in the simulants. These compounds were thought to have been present in the adhesive between the laminated films, and migrated through the food-contact film of the package. Consumption of potassium permanganate and residue on evaporation of the heated water were ten times of those of the water simulant, while the total organic carbon level of the heated water was several-hold greater than that of the water simulant. In addition, migrant levels per surface area of the pouch were one-fourth of the concentrations per content volume of the pouch. Since compliance with the legal limits is evaluated based on the concentration per surface area, real migration into foods would be underestimated by a factor of another four.     

Low-cycle dwell-time fatigue in Ti-6242

Ambient-temperature, low-cycle dwell-time and conventional low-cycle fatigue tests were performed on Ti-6Al-2Sn-4Zr-2Mo-0.1Si (Ti-6242). Specimens were solution annealed at various temperatures below the beta transus to control the volume fraction of primary alpha phase and were subsequently shot-peened. The influence of the changes in primary alpha phase on the low-cycle dwell-time fatigue life (LCDF) were determined and compared to the conventional low-cycle fatigue (LCF) properties of the alloy. A 120-second dwell significantly decreased the number of cycles to failure, although the factor decrease of LCF from a dwell, in general, diminished with decreasing stress. The Increasing primary alpha phase associated with lower solution temperatures appears to increase susceptibility to low-cycle dwell-time fatigue. It also appears that the susceptibility to dwell fatigue may be associated with ambient-temperature, time-dependent, cyclic (creep) plasticity.