Visual adjustments to temporal blur

After observers have adapted to an edge that is spatially blurred or sharpened, a focused edge appears too sharp or blurred, respectively. These adjustments to blur may play an important role in calibrating spatial sensitivity. We examined whether similar adjustments influence the perception of temporal edges, by measuring the appearance of a step change in the luminance of a uniform field after adapting to blurred or sharpened transitions. Stimuli were square-wave alternations (at 1 to 8 Hz) filtered by changing the slope of the amplitude spectrum. A two-alternative-forced-choice task was used to adjust the slope until it appeared as a step change, or until it matched the perceived transitions in a reference stimulus. Observers could accurately set the waveform to a square wave, but only at the slower alternation rates. However, these settings were strongly biased by prior adaptation to filtered stimuli, or when the stimuli were viewed within temporally filtered surrounds. Control experiments suggest that the latter induction effects result directly from the temporal blur and are not simply a consequence of brightness induction in the fields. These results suggest that adaptation and induction adjust visual coding so that images are focused not only in space but also in time.     

Metals in recycled polyethylene terephthalate and discrimination method for its use

Metals in recycled polyethylene terephthalate (PET) were analyzed by ICP-MS following microwave digestion with nitric acid. Physically and superclean-like recycled PET contained both Ge and Sb, and sometimes contained Co, P or Si. In contrast, the chemically recycled PET contained only Ge or Sb, and some samples contained Co. The recycled PETs did not contain Pb or Cd. Ge and Sb were catalysts of the polymerization, and the other metals also originated from the PET resin as additives. It was concluded that there is no safety concern about metals in recycled PET. It became clear that the presence of both Ge and Sb could identify products formed using physically or superclean-like recycled PET. According to this discrimination method, about half of the sheet molding products used recycled PET.     

High throughput optical readout of dense arrays of nanomechanical systems for sensing applications

We present an instrument based on the scanning of a laser beam and the measurement of the reflected beam deflection that enables the readout of arrays of nanomechanical systems without limitation in the geometry of the sample, with high sensitivity and a spatial resolution of few micrometers. The measurement of nanoscale deformations on surfaces of cm(2) is performed automatically, with minimal need of user intervention for optical alignment. To exploit the capability of the instrument for high throughput biological and chemical sensing, we have designed and fabricated a two-dimensional array of 128 cantilevers. As a proof of concept, we measure the nanometer-scale bending of the 128 cantilevers, previously coated with a thin gold layer, induced by the adsorption and self-assembly on the gold surface of several self-assembled monolayers. The instrument is able to provide the static and dynamic responses of cantilevers with subnanometer resolution and at a rate of up to ten cantilevers per second. The instrumentation and the fabricated chip enable applications for the analysis of complex biological systems and for artificial olfaction.     

Contrasting diurnal variations in fossil and nonfossil secondary organic aerosol in urban outflow, Japan

Diurnal variations of fossil secondary organic carbon (SOC) and nonfossil SOC were determined for the first time using a combination of several carbonaceous aerosol measurement techniques, including radiocarbon (1?C) determinations by accelerator mass spectrometry, and a receptor model (chemical mass balance, CMB) at a site downwind of Tokyo during the summer of 2007. Fossil SOC showed distinct diurnal variation with a maximum during daytime, whereas diurnal variation of nonfossil SOC was relatively small. This behavior was reproduced by a chemical transport model (CTM). However, the CTM underestimated the concentration of anthropogenic secondary organic aerosol (ASOA) by a factor of 4-7, suggesting that ASOA enhancement during daytime is not explained by production from volatile organic compounds that are traditionally considered major ASOA precursors. This result suggests that unidentified semivolatile organic compounds or multiphase chemistry may contribute largely to ASOA production. As our knowledge of production pathways of secondary organic aerosol (SOA) is still limited, diurnal variations of fossil and nonfossil SOC in our estimate give an important experimental constraint for future development of SOA models.     

Determination of substances in polylactic acid products for food-contact use and mutagenicity of their migration solutions

Specification tests defined in the Japanese Food Sanitation Law were conducted on 7 polylactic acid food-contact products. Moreover, the content and migration of other compounds were examined by means of ICP-AES, GC/MS and mutagenicity tests. All products met their specifications, and migration levels of heavy metals were negligible. No notable peak was observed in GC/MS analysis. Moreover, all products gave negative results in both rec-assay and the umu-test. An increase in the β-galactosidase activity in the umu-test observed with the migration solution of soup bowl was due not to polylactic acid, but to the polyurethane coating.     

Fabrication of single-wall carbon nanotubes within the channels of a mesoporous material by catalyst-supported chemical vapor deposition

Diameter-controlled single-wall carbon nanotubes (SWCNTs) have been synthesized using Co, Fe/Co and Rh/Pd alloy nanoparticles trapped within the one-dimensional channels of a mesoporous materials (Folded Sheets Mesoporous material: FSM-16) by catalyst-supported chemical vapor deposition (CCVD) using ethanol as carbon source at 973-1173 K. The SWCNTs synthesized are characterized by transmission electron microscopy, Raman spectroscopy and photoluminescence spectroscopy. The yield, diameter distribution and quality of the SWCNTs strongly depend on the reaction temperature during CCVD. The product synthesized at 1173 K contains only SWCNTs, in marked contrast to those synthesized at lower temperatures. As the reaction temperature decreases, the relative abundance of multi-wall carbon nanotubes against SWCNTs significantly increases, whereas the mean diameter of SWCNTs increases as reaction temperature increases. The results show that a careful control of the reaction temperature is crucial to fabricate diameter-controlled SWCNTs from the channels of FSM-16.     

A nationwide survey of NDMA in raw and drinking water in Japan

A nationwide survey of N-nitrosodimethylamine (NDMA) in both raw and finished water samples from drinking water treatment plants (DWTPs) in Japan was conducted. NDMA was analyzed by solid-phase extraction (SPE) followed by ultra performance liquid chromatography (UPLC) coupled with tandem mass spectrometry (MS/MS). NDMA was detected in 15 of 31 raw water samples collected in the summer at concentrations up to 2.6 ng/L, and in 9 of 28 raw water samples collected in winter at concentrations up to 4.3 ng/L. The NDMA concentrations were higher in raw water samples collected from treatment plants with catchment areas that have high population densities. The NDMA concentrations were higher in river water samples collected from the east and west of Japan than in those collected from other areas. NDMA was detected in 10 of 31 finished samples collected in summer at reduced concentrations of up to 2.2 ng/L, while 5 of 28 finished samples collected in winter showed NDMA concentrations up to 10 ng/L. The highest NDMA levels were detected in finished water samples collected from the Yodo River basin DWTP, which uses ozonation. Furthermore, evaluation of the process water produced at six advanced water treatment plants was conducted. Influent from the Yodo River indicated that the NDMA concentration increased during ozonation to as high as 20 ng/L, and then decreased with subsequent biological activated carbon treatment. To our knowledge, this is the first nationwide evaluation of NDMA concentrations in water conducted in Japan to date.     

Transient cell proliferation with polyethylenimine-cationized N-terminal domain of simian virus 40 large T-antigen

Polyethylenimine (PEI) cationization is a powerful strategy for protein transduction into cells. In this study, we attempted the artificial regulation of cell proliferation by protein transduction of the N-terminal domain (1-132 amino acids) of the simian virus 40 large T-antigen (SVLT-N), which inactivates retinoblastoma family proteins but not p53. To deliver SVLT-N into cells, we employed an indirect cationization method by forming a complex of biotynylated SVLT-N through disulfide bonds (biotin-SS-SVLT-N) and PEI-cationized avidin (PEI600-avidin). Using this complex, SVLT-N was transduced into the nucleus of confluent and quiescent Balb/c 3T3 cells and was found to be complexed with a cellular target protein, pRb. Furthermore, SVLT-N transduction induced cell proliferation in spite of confluent conditions. Because SVLT-N thus transduced into cells gradually degraded and was not detectable after a 4-d incubation, transiently transformed cells were obtained by this method. These results suggest that oncogene protein transduction technology has great potential for in vitro regulation of cell proliferation.     

Outstanding Toughness of Cherry Bark Achieved by Helical Spring Structure of Rigid Cellulose Fiber Combined with Flexible Layers of Lipid Polymers

Cellulose, a main component of cell walls, generally makes materials hard and brittle. However, an ultratough, cellulosic material is found in nature: cherry bark. Surprisingly, it elongates by more than twice of its initial length and behaves as a plastic film during stretching. This amazing mechanical property is achieved by a well‐designed cell wall structure; cellulose fibers are folded like helical springs, covered by multiple flexible layers of lipid polymers.