合山电厂3个机组主厂房定向爆破拆除

介绍了广西合山电厂 1#～3# 机组主厂房定向爆破设计与施工.该工程不仅规模大、环境十分复杂、工期紧、难度高、风险性极强,最大特点是拆除发电设备与爆破同步进行施工.     

基于数字图像分析的薄板成形应变场测量方法

对薄板成形应变场传统的测量方法进行了研究。指出了其不足和误差的来源，提出了数字图像分析法测量薄板成形中的应变场，对测量原理，新的测量方法对传统方法的改进，以及如何降低误差进行了介绍，指出数字图像分析法的前景，提出了改进意见。     

转运站框架式厂房的爆破拆除

合山电厂转运站待拆五层钢筋混凝土框架式厂房西侧与被保护的引风机房相隔仅 0 3m ,北侧与工具房相连 ,南侧与需要保护的油池相邻。爆破切口布置在二层 ,并把最后一排柱的爆破部位提高到引风机房顶部以上 0 5m处 ,避免了后坐对引风机房的影响。通过预处理 ,将厂房与工具房分离。架设防护结构 ,阻挡飞石 ,保护了油池。文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。     

Approximate sensitivity analysis for acyclic Markov reliability models

Acyclic Markov chains are frequently used for reliability analysis of nonmaintained mission-critical computer-based systems. Since traditional sensitivity (or importance) analysis using Markov chains can be computationally expensive, an approximate approach is presented which is easy to compute and which performs quite well in test cases. This approach is presented in terms of a Markov chain which is used for solving a dynamic fault-tree, but the approach applies to any acyclic Markov reliability model.     

高频地波雷达相位补偿系统

OSMAR2000采用的是“一发八收,收发共用”模式的相控阵高频地波雷达.为了扩大其探测的范围,在新的雷达系统中将采用多发多收的模式,从而导致当信号通过通道后,信号的相位会因受到通道的调制而发生改变,使得雷达无法正常工作,因此需要对通道的相位进行实时监控和补偿.在参考了低频段的相位测量原理和射频段的相移电路的设计理论的基础上,该文提出了基于差分放大器、容阻和容感器件的高频地波雷达收发通道的相位控制系统.     

Co^3＋—modified Surface of LiMn2O4 Spinel for its Improvementof Electrochemical Properties

Cobalt was used to modify the surface of spinel LiMn2O4 by a solution technique to produce Co^3 -modified surface material (COMSM). Cobalt was only doped into the surface of LiMn2O4 spinel. XPS(X-ray photoelectron spectroscopy) analysis confirms the valence state of Co^3 . COMSM has stable spinel structure and can prevent active materials from the corrosion of electrolyte. The ICP(inductively coupled plasma) determination of the spinel dissolution in electrolyte showed the content of Mn dissolved from COMSM was smaller than that from the pure spinel. AC impedance patterns show that the charge-transfer resistance (Rct) for COMSM is smaller than that for pure spinel. The particles of COMSM are bigger in size than those of pure spinel according to the micrographs of SEM(scanning electron microscopy). The determinations of the electrochemical characterization show that COMSM has both good cycling performance and high initial capacity of 124.1 mA/h at an average capacity loss of 0.19 mAh/g per cycle.     

液动旋冲接头冲击功测试方法研究

液动旋冲接头性能参数是旋冲接头设计的主要依据之一，如何对液动旋冲接头的参数进行检测是非常重要的工作。在分析和比较了测试液动旋冲接头性能参数各种方法的基础上，选择了冲击力法来进行破岩液动旋冲接头的性能参数测试，以YD系列测力传感器为检测元件，建立了一套比较完善的自动检测系统。分析了影响单次冲击功测试的因素，得出了测试旋冲接头的性能参数的影响规律。     

当心新的"信息化陷阱"——合理规划、慎重选择"信息化"切入点

信息化巳成为当今的一大热点，文章以客观的角度分析了企业信息化应用的现状，阐述了如何合理规划、选择“信息化”切入点，对待实施信息化的企业具有重要的意义。     

傅立叶变换在虚拟仪器LabVIE中的应用

文中介绍了LabVIEW环境下用NI公司高级分析库里的信号处理工具包的Real FFT.vi傅立叶变换,采用此种方法对某型飞机起落架液压测试系统采样信号进行频谱分析,实验证明其效果良好.