Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

An investigation on the heterogeneous nature of mineral matters in Assam (India) coal by CCSEM technique

This is a very first preliminary investigation on the distribution of heterogeneous nature of mineral matter in one of the industrially important Assam (India) pulverized coal using computer-controlled scanning electron microscopy (CCSEM). The results show that clay minerals, quartz, pyrite, and pyrrhotite form the bulk of the mineral matter. Minor minerals, such as calcite, dolomite, ankerite, barite, oxidized pyrrhotite, and gypsum, are also observed in the sample. The particle size distribution (PSD) of the included minerals is generally observed to be finer than that of the excluded ones in the coal. As a consequence, the coal rich in included minerals has more small mineral particles, which may affect its reactivity. Regarding the association of individual mineral species, the proportion of included to excluded is found to be higher in major cases. With regard to the modes of occurrence of major inorganic elements, it is found that Si mostly occurs as quartz and clay minerals, while Al mostly occurs as silicate minerals. Fe is primarily present as iron sulfides, iron oxide, and Fe-Al-silicate. S is partitioned into iron sulfides and gypsum. Most Ca occurs as carbonates and gypsum, with a minor fraction associated with clay minerals. Mg is mainly present as dolomite and clay minerals, with a very minor fraction present as ankerite. The majority of alkali elements are associated with aluminosilicates. P is mostly associated with kaolinite and/or present as more complex compounds containing Al, Si, and other elements as apatite is found to be absent in the coal studied. Ti is mainly present as rutile and kaolinite.     

Rapid preparation of monodisperse biodegradable polymer nanospheres using a membrane emulsification technique under low gas pressure

Nanospheres of poly(lactide-co-glycolide) (PLGA), a biodegradable polymer, have been prepared using the conventional solvent diffusion method. In this study, a method combining the solvent diffusion method and a two-step (premix) membrane emulsification technique is proposed for the preparation of monodisperse PLGA nanospheres with a diameter of 200 nm. The monodispersity of the PLGA nanospheres was higher than that of nanospheres obtained by the conventional solvent diffusion method. Generally, preparation of small particles or droplets by the membrane emulsification technique requires a supply of high-pressure nitrogen gas to force the emulsion or dispersion solution through the small pores of the membrane. However, in the technique proposed here, low-pressure nitrogen gas (0.02–0.11 kgf/cm²) is sufficient. Thus, using this technique, one can obtain monodisperse PLGA nanospheres with a diameter of 200 nm in a relatively short period of time under low-pressure nitrogen gas.     

Simulation of mechanical properties of epoxy-based chemically amplified resist by coarse-grained molecular dynamics

The mechanical properties of an epoxy-based chemically amplified resists with various cross-linking ratios were simulated using a newly developed coarse-grained molecular dynamics simulation that employs a bead–spring model. Models with the different cross-linking ratios were created in the molecular dynamics calculation step and uniaxial elongation simulations were performed. The results reveal that the simulated elastic modulus of the resist modeled by the Kremer–Grest model with an extended angle bending potential depends on the cross-linking ratio, its dependency exhibits good agreement with that determined by nanoindentation tests.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Analysis of Cerebrospinal Fluid Extracellular Vesicles by Proximity Extension Assay: A Comparative Study of Four Isolation Kits

There is a lack of reliable biomarkers for disorders of the central nervous system (CNS), and diagnostics still heavily rely on symptoms that are both subjective and difficult to quantify. The cerebrospinal fluid (CSF) is a promising source of biomarkers due to its close connection to the CNS. Extracellular vesicles are actively secreted by cells, and proteomic analysis of CSF extracellular vesicles (EVs) and their molecular composition likely reflects changes in the CNS to a higher extent compared with total CSF, especially in the case of neuroinflammation, which could increase blood–brain barrier permeability and cause an influx of plasma proteins into the CSF. We used proximity extension assay for proteomic analysis due to its high sensitivity. We believe that this methodology could be useful for de novo biomarker discovery for several CNS diseases. We compared four commercially available kits for EV isolation: MagCapture and ExoIntact (based on magnetic beads), EVSecond L70 (size-exclusion chromatography), and exoEasy (membrane affinity). The isolated EVs were characterized by nanoparticle tracking analysis, ELISA (CD63, CD81 and albumin), and proximity extension assay (PEA) using two different panels, each consisting of 92 markers. The exoEasy samples did not pass the built-in quality controls and were excluded from downstream analysis. The number of detectable proteins in the ExoIntact samples was considerably higher (~150% for the cardiovascular III panel and ~320% for the cell regulation panel) compared with other groups. ExoIntact also showed the highest intersample correlation with an average Pearson’s correlation coefficient of 0.991 compared with 0.985 and 0.927 for MagCapture and EVSecond, respectively. The median coefficient of variation was 5%, 8%, and 22% for ExoIntact, MagCapture, and EVSecond, respectively. Comparing total CSF and ExoIntact samples revealed 70 differentially expressed proteins in the cardiovascular III panel and 17 in the cell regulation panel. To our knowledge, this is the first time that CSF EVs were analyzed by PEA. In conclusion, analysis of CSF EVs by PEA is feasible, and different isolation kits give distinct results, with ExoIntact showing the highest number of identified proteins with the lowest variability.     

Indentation-induced ductile behavior of glass–ceramics involving layered aluminosilicates

Contact damage in materials is critical in engineering applications because it influences mechanical resistance, such as wear, erosion, and impact failure. Indentation tests were performed using a tungsten carbide ball indenter (Hertzian contact) on the surfaces of glass–ceramics containing hexagonal CaAl₂Si₂O₈ or mica crystals (fluorophlogopite), both of which have a layered structure. The stress–strain relation and the permanent deformation on the surface, as well as the observation of the microcrack zone by X-ray computed tomography using synchrotron radiation, revealed that the glass–ceramic with hexagonal CaAl₂Si₂O₈ showed ductility similar to the quasi-plastic behavior previously observed in the mica glass–ceramic. The yield stresses of the glass–ceramics were estimated from the stress deviating from the stress–strain relation assuming complete elastic response between the ball and the sample. The ratio of the yield stress to Young modulus (Y/E) of the glass–ceramic with hexagonal CaAl₂Si₂O₈ was determined to be higher than that of the mica glass–ceramic.     

Bacterially Secretable Single-Chain Tandem Macrocyclic Peptides for High Affinity and Inhibitory Activity

The inhibition of protein-protein interactions (PPIs) is an effective approach for therapy. Owing to their large binding surface areas to target proteins, macrocyclic peptides are suitable molecules for PPI inhibition. In this study, we developed single-chain tandem macrocyclic peptides (STaMPtides) that inhibits the vascular endothelial growth factor (VEGF) receptor 2 (VEGFR2). They were artificially designed to comprise two different VEGFR2-binding macrocyclic peptides linked in tandem by peptide linkers and secreted by Corynebacterium glutamicum. Most potent VEGFR2-inhibitory STaMPtides with length-optimized linkers exhibited >1000 times stronger inhibitory activity than their parental monomeric peptides, possibly due to the avidity effect of heterodimerization. Our approach of using STaMPtides for PPI inhibition may be used to inhibit other extracellular factors, such as growth factors and cytokines.     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.