Enhancement of the hydrophobicity and oleophobicity of a polyurethane coating using a fluorine-free polyfarnesene-based polyol

The development of hydrophobic and oleophobic surfaces on materials has attracted significant attention in various research fields. Fluoropolymers, which possess low surface energy and are both highly hydrophobic and oleophobic in nature, are widely used to enhance the liquid repellency of materials. However, during fluoropolymer manufacture, fluorine-containing compounds are released into the environment; thus, alternatives to fluoropolymers are required for maintaining environmental safety and realizing a sustainable society. Notably, the development of such alternative materials has been limited. Thus, we herein report the application of a novel polyurethane (PU) coating synthesized from bio-based raw materials. The prepared hydrogenated polyfarnesene PU (HHPF PU), which possesses an amorphous bottlebrush-like polyalkyl structure, was found to exhibit higher hydrophobicity and oleophobicity than polytetrafluoroethylene (PTFE), which is a typical low-surface-energy material. The water and n-hexadecane contact angles of the HHPF PU were determined to be 119° and 68°, respectively, whereas those of PTFE were 108° and 46°, respectively. In addition, the density depth profile of the PU thin film was confirmed through x-ray reflectometry. This study provides a novel approach for enhancing the hydrophobicity and oleophobicity of materials using bottlebrush-like polyalkyl structure instead of fluorine.     

Synthesis of 4‐Aryl‐2‐Quinolones via Copper‐Catalyzed Hydroarylation of (o‐Aminophenyl)propiolates with Arylboronates

4‐Aryl‐2(1H)‐quinolones were efficiently synthesized via copper‐catalyzed hydroarylation of (o‐aminophenyl)propiolates with arylboronic acid neopentyl glycol esters. The substrate propiolates were prepared from the corresponding silylalkynes with carbon dioxide by Kondo’s carboxylation method using N,N‐dimethylformamide as a solvent. Hydroarylation was performed in the presence of 3 mol% copper(II) acetate in methanol at 28 °C for 12 h and subsequent deprotection using trifluoromethanesulfonic acid (3.0 equiv.) at 65 °C for 2 h in the same pot to afford the desired 4‐aryl‐2(1H)‐quinolones in 39–89% yields.

     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.     

Potato and soy peptides alter caecal fermentation and reduce serum non‐HDL cholesterol in rats fed cholesterol

We examined the effect of potato peptides (PPC) in rats fed a cholesterol‐enriched diet, in comparison with two cholesterol‐enriched diets containing soy peptides (SPC) or casein (CNC), and a cholesterol‐free diet containing casein (CN) for 4 weeks. The serum non‐high‐density lipoprotein (HDL) cholesterol level was lower in the PPC‐ (–18.39%) and SPC‐fed (–32.76%) groups (p <0.05) than in the CNC‐fed group at the end of the feeding period. The low‐density lipoprotein receptor mRNA level in the PPC‐fed group, and cholesterol 7α‐hydroxylase and scavenger receptor class B type 1 mRNA levels in the SPC‐fed group, were higher (p <0.05) than in the CN‐ and CNC‐fed groups. Faecal neutral sterol and caecal short‐chain fatty acid concentrations in the PPC‐ and SPC‐fed groups were higher (p <0.05) than in the CN‐ and CNC‐fed groups. The faecal total acidic sterol concentration was higher in the SPC‐fed group than in the CN‐ and PPC‐fed groups. Caecal anaerobe and Bifidobacterium populations were higher (p <0.05) in the PPC‐ and SPC‐fed groups than in the CN‐fed group. This study suggests that potato peptides, as soy peptides, alter caecal fermentation and steroid absorption and reduce the serum non‐HDL cholesterol level in rats fed cholesterol.     

The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Comparisons of Two Models for the Simulation of a DC Arc Plasma Torch

The hypothesis of local thermal equilibrium (LTE) in thermal plasma has been widely accepted. Most of the simulation models for the arc plasma torch are based on the hypothesis of LTE and its results indicate good validity to mimic the pattern of plasma flow inside a plasma torch. However, according to the LTE hypothesis, electrical conductivity near electrodes is significantly lower because of the low gas temperature. Consequently, it is difficult for electrical current flows to pass between the anode and cathode. Therefore, the key subject for a model concentrating on the LTE assumption is to deal with the low electrical conductivity near the electrodes. In this study, two models determining the electrical conductivity at the vicinity of the electrodes with two different assumptions were used to calculate the flow patterns inside a non-transferred DC arc plasma torch. Gas temperature, velocity, voltage drop, and heat energy of the plasma arc were compared between the two models. The results indicated that the plasma arc inside the plasma torch fluctuates, as simulated by both models. It seems that the model can obtain comparable accuracy with the experimental results if the plasma gas electrical conductivity is determined by nominal electron temperature.     

Observation of non-chemical equilibrium effect on Ar-CO2-H2 thermal plasma model by changing pressure

The authors developed a two-dimensional one-temperature chemical non-equilibrium (1T-NCE) model of Ar-CO₂-H₂ inductively coupled thermal plasmas (ICTP) to investigate the effect of pressure variation. The basic concept of one-temperature model is the assumption and treatment of the same energy conservation equation for electrons and heavy particles. The energy conservation equations consider reaction heat effects and energy transfer among the species produced as well as enthalpy flow resulting from diffusion. Assuming twenty two (22) different particles in this model and by solving mass conservation equations for each particle, considering diffusion, convection and net production terms resulting from hundred and ninety eight (198) chemical reactions, chemical non-equilibrium effects were taken into account. Transport and thermodynamic properties of Ar-CO₂-H₂ thermal plasmas were self-consistently calculated using the first-order approximation of the Chapman-Enskog method. Finally results obtained at atmospheric pressure (760 Torr) and at reduced pressure (500, 300 Torr) were compared with results from one-temperature chemical equilibrium (1T-CE) model. And of course, this comparison supported discussion of chemical non-equilibrium effects in the inductively coupled thermal plasmas (ICTP).     

Self-assembly of a silica-surfactant nanocomposite in a porous alumina membrane

A mesoporous membrane composed of nanochannels with a uniform diameter has a potential use for precise size-exclusive separation of molecules. Here, we report a novel method to form a hybrid membrane composed of silica-surfactant nanocomposite and a porous alumina membrane, by which size-selective transport of molecules across the membrane becomes possible. The nanocomposite formed inside each columnar alumina pore was an assembly of surfactant-templated silica-nanochannels with a channel diameter of 3.4 nm; the channel direction being predominantly oriented along the wall of the columnar alumina pore. Molecules could be transported across the membrane including the silica-surfactant nanocomposite with a capability of nanometre-order size-exclusive separation. Our proposed membrane system has a potential use not only for separation science, but also catalysis and chip technologies.