Solar cell efficiency tables (Version 31)

Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined and new entries since July, 2008 are reviewed. Copyright © 2007 John Wiley & Sons, Ltd.     

Application of the partial element equivalent circuit method to tower surge response calculations

This article presents calculations of tower surge responses and insulator voltages of an actual transmission tower including ground wires and phase wires. The partial element equivalent circuit (PEEC) method is applied as a simulation tool. Surge responses of the tower and insulator voltages calculated by the PEEC method are compared with electro magnetic transients program (EMTP) simulated results and experimental results collected from the literatures. The results calculated by the PEEC method agree well with the experimetal results, not only amplitudes but also waveshapes. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Fabrication and piezoelectric properties of BaTiO3/BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 composites

We fabricated xBaTiO₃ (BT)/(1-x)[BaTiO₃-Bi(Mg_1/2Ti_1/2)O₃-BiFeO₃] (BT-BMT-BF)?+?0.1?wt%MnCO₃ composites by spark plasma sintering and investigated the effect of BT content x, BT powder size, and BT-BMT-BF composition on piezoelectric properties. For xBT/(1-x)(0.3BT-0.1BMT-0.6BF) +?0.1?wt%MnCO₃ (x?=?0–0.75) composites with a 0.5-µm BT powder, the dielectric constant was increased with x, and the relative density was decreased at x?=?0.67 and 0.75, creating optimum BT content of x?=?0.50 with a piezoelectric constant d₃₃ of 107?pC/N. When a larger 1.5-µm BT powder was utilized for the composite with x?=?0.50, the d₃₃ value increased to 150?pC/N due to the grain size effect of the BT grains. To compensate for a compositional change from the optimum 0.3BT-0.1BMT-0.6BF due to partial diffusion between the BT and 0.3BT-0.1BMT-0.6BF grains, a 0.5BT/0.5(0.275BT-0.1BMT-0.625BF)?+?0.1?wt%MnCO₃ composite with the 1.5-µm BT powder was fabricated. We obtained an increased d₃₃ value of 166?pC/N. These results provided a useful composite design to enhance the piezoelectric properties.     

In Vivo Simultaneous Analysis of Gene Expression by Dual-Color Luciferases in Caenorhabditis elegans

Both fluorescent and luminescent observation are widely used to examine real-time gene expression patterns in living organisms. Several fluuorescent and luminescent proteins with specific optical properties have been developed and applied for simultaneous, multi-color observation of more than two gene expression profiles. Compared to fluorescent proteins, however, the application of multi-color luminescent imaging in living organisms is still limited. In this study, we introduced two-color luciferases into the soil nematode C. elegans and performed simultaneous analysis of two gene expression profiles. Using a green-emitting luciferase Eluc (emerald luciferase) and red-emitting luciferase SLR (stable luciferase red), the expression patterns of two genes were simultaneously observed in single animals from embryonic to adult stages over its whole life span. In addition, dual gene activities were observed at the single embryo level, with the simultaneous observation of morphological changes. These are the first application of a two-color luciferase system into a whole animal and suggest that precise relationship of expression patterns of multiple genes of interest can be analyzed over the whole life of the animal, dependent on the changes in genetic and/or environmental conditions.     

Bending fracture rule for 3D-printed curved continuous-fiber composite

Three-dimensional (3D) printing is an attractive technology to produce complex structures without the need for expensive tools and molds. Additives are usually incorporated with the plastic materials used in 3D printing to increase their strength and rigidity. In particular, carbon fiber-reinforced plastic (CFRP) shows promise as a material for use in 3D printing. However, the strength of CFRP after printing is still unclear, although it is known that its strength is affected by the plastic melting during printing. In this study, we analyzed the fracture behavior of CFRP specimens before and after bending to different curvature radii. From the experimental results, a fracture criterion that described the behavior of the materials by considering tensile and compressive loads was developed. The fracture mechanism was the same for CFRP specimens with different curvature radii. These results increase our understanding of the mechanical properties of CFRP materials used in 3D printing.     

Trends of anti-analysis operations of malwares observed in API call logs

Some malwares execute operations that determine whether they are running in an analysis environment created by monitoring software, such as debuggers, sandboxing systems, or virtual machine monitors, and if such an operation finds that the malware is running in an analysis environment, it terminates execution to prevent analysis. The existence of malwares that execute such operations (anti-analysis operations) is widely known. However, the knowledge acquired thus far, regarding what proportion of current malwares execute anti-analysis operations, what types of anti-analysis operations they execute, and how effectively such operations prevent analysis, is insufficient. In this study, we analyze FFRI Dataset, which is a dataset of dynamic malware analysis results, and clarify the trends in the anti-analysis operations executed by malware samples collected in 2016. Our findings revealed that, among 8243 malware samples, 856 (10.4%) samples executed at least one type of the 28 anti-analysis operations investigated in this study. We also found that, among the virtual machine monitors, VMware was the most commonly searched for by the malware samples.     

Calcium Phosphate Glass-Ceramic Crown Prepared by Lost-Wax Technique

A calcium phosphate glass-ceramic crown for dentistry was developed. The glass is cast into the shape of the crown by the lost-wax technique and subsequently heat-treated to convert it into the glass-ceramic, which exhibits excellent mechanical strength. The fine structure of the glass-ceramic is similar to that of the enamel of a natural tooth, and its hardness is near that of enamel.