Development of an Artificial Lipid-Based Membrane Sensor with High Selectivity and Sensitivity to the Bitterness of Drugs and with High Correlation with Sensory Score

This paper reports the development of membrane sensors based on an artificial lipid and plasticizers with high selectivity and sensitivity to drug bitterness by using bis(1-butylpentyl) adipate (BBPA), bis(2-ethylhexyl) sebacate (BEHS), phosphoric acid tris(2-ethylhexyl) ester (PTEH), and tributyl o-acetylcitrate (TBAC) as a plasticizer and phosphoric acid di-n-decyl ester (PADE) as an artificial lipid to optimize surface hydrophobicity of the sensors. In addition, a sensor with highly correlated bitterness sensory score was developed by blending BBPA and TBAC to detect the bitterness suppression effect of sucrose, and other bitter-masking materials. Therefore, this sensor can be used to evaluate the bitterness of various drug formulations with high accuracy. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Investigation of thermal comfort in nanofibrous three‐layer fabric for cold weather protective clothing

The development of functional nanofiber materials with high specific surface area and porosity has been a highly interesting field of research in recent years due to its versatile properties for diverse applications. The combination of nanofibers into material clothes can open up new opportunities to improve comfort performance and thermal management properties. In this work, we demonstrated that the porous lightweight nanofibrous membrane could be coated on the fabric and laminated to improve its thermal comfort. The polyacrylonitrile was electrospun onto the surface of the polyester fabric with three different fineness and laminated with a warp knitted interlining in a controlled condition by sewing/fusing. The effect of the nanofibers diameter, sewing and fusing process on thermal insulation, air permeability, breathability, and water resistance of the obtained three‐layer samples were studied. The results showed that the presence of the nanofibers thin layer could improve the thermal comfort by controlling the studied parameters compared to the external face fabric as control. It was obtained that the fusing technique is more efficient than sewing for this purpose. The fused samples are waterproof and windproof, while instantly venting moisture and had good thermal insulation to protect the body from cold. POLYM. ENG. SCI., 59:2032–2040, 2019. © 2019 Society of Plastics Engineers     

Proportion of aflatoxin B1 contaminated kernels and its concentration in imported peanut samples

Moldy and split peanut kernels were separated from peanuts exported from Brazil, Sudan, India and Taiwan by visual inspection. The remaining peanuts from Brazil, Sudan and India were roasted lightly and the skins were removed. Stained peanuts were separated from the others. Aflatoxin was detected in moldy and stained peanuts. There was a positive correlation between % of aflatoxin-contaminated peanut kernels and aflatoxin B1 concentration in whole samples. Aflatoxin concentration of moldy peanuts was higher than that of stained peanut kernels.     

Simulation of pyramid type three-roll bending process

A simulation of the deformation of a workpiece with a U-shaped cross section in a three-roll bending process is performed. Based on the properties of the workpiece, the distribution of curvature and bending moment are calculated in accordance with the displacement and the rotation of the rolls. The relationship between the position of the rolls and the final curvature of the workpiece is obtained. An experiment is performed and the accuracy of the simulation is confirmed.     

Doubled layered ITO/SnO2 conducting glass for substrate of dye-sensitized solar cells

The effects of indium tin oxide (ITO) and ITO/SnO₂ conducting substrates on photovoltaic properties of dye-sensitized solar cells (DSCs) using nanocrystalline TiO₂ were studied. The decrease in fill factor of the DSCs was correlated to the increase in resistance of conducting substrate. The heat stability of ITO conducting glass was improved by depositing SnO₂ on ITO layer. The efficiency of the cells using double layered ITO/SnO₂ substrate remarkably increased comparing with that of the cells using ITO substrates. It is worth mentioning that increasing in sintering time, which enhanced the electronic contact between substrate and TiO₂, also modified the cell performance of MP-TiO₂ cells. Our experimental finding suggests that 3000 Å ITO substrate, which was covered by 1000 Å SnO₂ layer, exhibited the best properties for the DSCs.     

Study on explosion characteristics of natural gas and methane in semi-open space for the HTTR hydrogen production system

It is important to grasp the explosion characteristics of object gases: natural gas and methane, in order to evaluate the influence of a gas explosion accident in the HTTR hydrogen production system on the reactor. Thus, we carried out explosion experiments of the object gases in semi-open space, and verified a numerical analysis code for the simulation of the explosion accident. It was confirmed that NG–air mixture or methane-air mixture in semi-open space did not result in DDT although 10 g of C-4 explosive was used as an ignition source, and the numerical results agreed relatively with the experimental results. As a result, we could have the prospects for predicting the influence of the explosion accident on the reactor.     

Effect of CO2 on layered Li1+zNi1−x−yCoxMyO2 (M = Al,Mn) cathode materials for lithium ion batteries

We investigated the effect of CO₂ on layered Li_1+zNi_1−x−yCo_xM_yO₂ (M = Al, Mn) cathode materials for lithium ion batteries which were prepared by solid-state reactions. Li_1+zNi_(1−x)/2Co_xMn_(1−x)/2O₂ (Ni/Mn mole ratio = 1) singularly exhibited high storage stability. On the other hand, Li_1+zNi_0.80Co_0.15Al_0.05O₂ samples were very unstable due to CO₂ absorption. XPS and XRD measurements showed the reduction of Ni³⁺ to Ni²⁺ and the formation of Li₂CO₃ for Li_1+zNi_0.80Co_0.15Al_0.05O₂ samples after CO₂ exposure. SEM images also indicated that the surfaces of CO₂-treated samples were covered with passivation films, which may contain Li₂CO₃. The relationship between CO₂-exposure time and CO₃²⁻ content suggests that there are two steps in the carbonation reactions; the first step occurs with the excess Li components, Li₂O for example, and the second with LiNi_0.80Co_0.15Al_0.05O₂ itself. It is well consistent with the fact that the discharge capacity was not decreased and the capacity retention was improved until the excess lithium is consumed and then fast deterioration occurred.