Analysis of the drain breakdown mechanism in ultra-thin-film SOIMOSFETs

The drain breakdown phenomenon in ultra-thin-film (silicon-on-insulator) SOI MOSFETs has been studied. Two-dimensional simulation revealed that the thinning of the SOI film brings about an increase in the drain electric field due to the two-dimensional effect, causing a significant lowering in the drain breakdown voltage, as has been commonly seen in ultra-thin-film SOI MOSFETs. The simulation also showed that the lowered drain breakdown voltage recovered almost to its original value when the drain SOI thickness was restored, suggesting that the drain structure, rather than the source, plays a major role in determining the drain breakdown voltage. Experiments using an asymmetric device structure supported this hypothesis, showing that the breakdown voltage was mostly dependent on the drain structure, the initial potential barrier height at the source-SOI-body junction being only a minor factor. Transient simulation was also carried out to investigate the detailed breakdown process, showing that holes accumulate near the source-SOI-body junction at a high drain bias, eventually forward-biasing the junction. These results indicate that a careful drain design and/or proper choice of the SOI thickness as well as the supply voltage are quite important for realizing high performance of ultra-thin-film SOI MOSFETs     

Application of E-beam recrystallization to three-layer imageprocessor fabrication

E-beam recrystallization has been applied to the fabrication of a three-layer processor. The seed structure and the E-beam conditions were successfully optimized so that a large-area SOI as wide as 1 mm was recrystallized without void generation with no damage to underlying devices. The actual SOI area in the device, 850×1100 μm, was recrystallized with one E-beam scan by aligning its position. The three-layer image processor was capable of visual image sensing with a feature outline extraction in a parallel processing manner. Normal operations of the fundamental functions have been confirmed, demonstrating the feasibility of E-beam recrystallization for three-dimensional IC application     

Determination of metallic impurities in high-purity type IIa diamond grown by high-pressure and high-temperature synthesis using neutron activation analysis

Metallic impurities in high-purity type IIa and conventional type Ib diamond single crystals grown by high-pressure and high-temperature (HPHT) synthesis were determined by neutron activation analysis using thermal neutrons. Metallic impurities of Fe, Co, Cr and other minor elements were detected in the high-purity type IIa diamond crystal. The typical quantities of these metallic impurities were a few ppb. The influence of these metallic impurities on the electrical properties of the type IIa diamond crystal was practically negligible compared with nitrogen and boron impurities behaving as a donor and an acceptor, respectively. In addition to the impurities detected in the type IIa diamond crystal, Ni impurities of several hundreds of ppb were detected in conventional type Ib diamond crystals. A difference in molten metal solvents used in the synthesis of each diamond crystal resulted in the difference in metallic impurities.     

Nitric oxide (NO) scavenging capacity of natural antioxidants

Nitric oxide (NO)-scavenging capacities of several hydrophilic antioxidants were determined by using the PTIO method, a competitive NO-scavenging method with 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl 3-oxide (PTIO). Relative NO-scavenging rates of antioxidants were measured with respect to PTIO and the scavenging rate constants were calculated based on PTIO’s rate constant. Results indicated that NO-scavenging rate constants of the antioxidants were: uric acid (2.5) > caffeic acid (1.2) > trolox (1.0) > genistein (0.19) > glutathione (0) ≈ N-acetylcysteine (0), where the numbers are expressed in trolox equivalent unit. The oxidation potentials of these antioxidants were measured and the order in the magnitude of oxidation potential was in good accordance with NO-scavenging capacity. Based on the results, we have suggested that the primary chemical process of the antioxidant reaction with NO can be characterised with the electron transfer from NO to the antioxidant.     

Common mechanics of mode switching in locomotion of limbless and legged animals

Crawling using muscular waves is observed in many species, including planaria, leeches, nemertea, aplysia, snails, chitons, earthworms and maggots. Contraction or extension waves propagate along the antero-posterior axis of the body as the crawler pushes the ground substratum backward. However, the observation that locomotory waves can be directed forward or backward has attracted much attention over the past hundred years. Legged organisms such as centipedes and millipedes exhibit parallel phenomena; leg tips form density waves that propagate backward or forward. Mechanical considerations reveal that leg-density waves play a similar role to locomotory waves in limbless species, and that locomotory waves are used by a mechanism common to both legged and limbless species to achieve crawling. Here, we report that both mode switching of the wave direction and friction control were achieved when backward motion was induced in the laboratory. We show that the many variations of switching in different animals can essentially be classified in two types according to mechanical considerations. We propose that during their evolution, limbless crawlers first moved in a manner similar to walking before legs were obtained. Therefore, legged crawlers might have learned the mechanical mode of movement involved in walking long before obtaining legs.     

Molecular characterization of the PEX14 gene from the methylotrophic yeast Pichia methanolica

In this study, we describe the molecular characterization of the PmPEX14 gene encoding the peroxisomal membrane protein from the methylotrophic yeast Pichia methanolica. The pex14Δ strain of P. methanolica lost its ability to grow on methanol and oleate but grew normally on glucose. Disruption of the PmPEX14 caused a decrease in the activities of peroxisomal methanol-metabolizing enzymes and mislocalization of those proteins into the cytosol and vacuole. Taken together, these findings show that PmPex14p has an essential physiological role in methanol metabolism in P. methanolica.     

H+-ATPase activity in Bifidobacterium with special reference to acid tolerance

The acid tolerance of 17 strains of nine species of bifidobacteria was compared using brief exposures to acidic conditions (pH 2-5). In addition, because it has been hypothesized that the acid tolerance of bifidobacteria depends on H+-ATPase activity, the activity of this enzyme in various strains and species was compared. In general, the acid tolerance of bifidobacteria was found to be weak, with the exception of Bifidobacterium lactis and Bifidobacterium animalis. High numbers of all strains of B. lactis and B. animalis survived exposure to pH 3-5 for 3 h. The H+-ATPase activity of the acid-tolerant strains B. lactis LKM512 and JCM 10602T, and B. animalis JCM 1190T, JCM 1253, JCM 7117, and JCM 7124 was higher at pH 4 than at pH 5. In contrast, the H+-ATPase activity of nonacid-tolerant strains was lower at pH 4 than at pH 5.     

Analysis of bis(trifluoromethylsulfonyl)imide-doped paramagnetic graphite intercalation compound using F very fast magic angle spinning nuclear magnetic resonance

F atoms bonding to paramagnetic/conductive graphene layers in accepter-type graphite intercalation compounds (GICs) are analyzed using very fast magic angle spinning nuclear magnetic resonance, which is applied for the first time on ¹⁹F nuclei to investigate paramagnetic materials. In the bis(trifluoromethylsulfonyl)imide(TFSI)-doped GIC, C–F bonds between fluorine atoms and graphene layers conform to a weak bonding of F to the graphene sheets. TFSI anions intercalated in the GIC do not show overall molecular motion; even at room temperature only the CF₃ groups rotate.     

Preparation of high-strength (Ta,W)C solid-solutions by spark plasma sintering

(Ta,W)C bulks were prepared by spark plasma sintering. Densification kinetics and solid-solution formation kinetics were performed on the powder mixtures using TaC and W powders. The as-received tungsten powder had a spherical shape and rather coarse size. By using the crushed and as-received powder, it can be suggested that sintering at 2000°C limits the reaction volume to 3–6 μm and hence allows forming a complete solid-solution using finer powders. The lattice parameter, hardness, toughness, and strength were investigated as a function of the TaC content. The flexural strength of the (Ta,W)C ceramic bulks was investigated up to 2000°C and it was found that the maximum strength was for the 60 mol.% TaC composition. Strength as a function of the temperature tended to increase up to 1200°C followed by a gradual decrease to 2000°C. When the TaC was reinformed by coarse W spheres, the flexural strength monotonically decreased from 570 MPa at room temperature to 220 MPa at 2000°C.