Application of a chemical heat pump to a cogeneration system

The feasibility of a proposed system that combines a magnesium oxide/water chemical heat pump and a diesel engine as a cogeneration system is discussed based on experimental results. The combined system is intended to utilize the waste heat discharge from the engine by means of the chemical heat pump and to level the heat supply load of the engine, allowing enhanced energy utilization. The thermal performance of the chemical heat pump in the cogeneration system is estimated based on the results of a packed‐bed experiment. The estimation indicates that by storing the waste heat from the engine during low demand periods, the cogeneration system can produce more than several times the standard thermal output of the diesel engine during peak demand periods. Copyright © 2001 John Wiley & Sons, Ltd.     

Biomimetic ion-channel sensors based on host-guest molecular recognition in Langmuir-Blodgett membrane assemblies

Biomimetic “ion-channel sensors” based on host-guest molecular recognition were constructed by incorporating several kinds of receptor molecules in Langmuir-Blodgett (LB) molecular assemblies deposited directly on glassy carbon electrodes. The receptors used were valinomycin, bis(crown ether)s, macrocyclic polyamine and cyclodextrin polyamine. The binding of charged stimulants (metal ions, inorganic and organic anions) to these receptors induced a marked increase (or decrease) in the ion permeability of the membranes, as detected by cyclic voltammetry using [Fe(CN)₆]^4- or [Ru(bpy)₃]²⁺ as marker ion. Such a mode of response, corresponding to model “channel opening (or closing)”, can be explained on the basis of the charge-charge interaction involving the stimulant, marker ion and lipid.     

Direct observation of the differences between Raman scatering and population inversion transition for their emission frequencies and pulse waveforms

In FIR laser emissions optically by a CO₂ laser, it has been reported that there are two different process namely “induced Raman scattering” and “population inversion transition”. In this paper, we show that the two different process have clearly different characteristics in emission frequensies and pulse waveforms in the case of a TEA-CO₂ laser excitation. We used in this work an intra-cavity etalon for the study of the emission frequensies and also we used a MOM point contact diode for the detection of the wavaformes. Especially, we show that the FIR pulse waveformes are able to analyze numerically on the concept of rate equations. In conclusion, we indicate that molecules would be classified into two categories with regard to optically pumping by a TEA-CO₂ laser. One of them produce mainly Raman scattered emissions, and other produce only the FIR emissions from population inversion transition in spite of high power intensity excitation.     

Assignments of fir laser emissions from CH3OH optically pumped by an intra-cavity etalon tuned TEA-CO2 laser

The author reports that TEA-CO₂ with an intra-cavity etalon is a useful pumping source which can deliver widely tunable beam (tunable range ～1 GHz) with accurate oscillation frequencies and with high power compared to a tunable wave guide laser. The source is applied to the excitations of CH₃OH and the FIR emissions from it are well assigned for there absorption transitions and FIR emissions. This proves that the source display not only usefulness for development of new FIR emissions but also for molecular spectroscopy.     

Hydrothermal Corrosion of Alumina Ceramics

The corrosion behavior and strength degradation of alumina ceramics with 99%, 99.9%, and 99.99% Al₂O₃ were studied in water at 300°C and 8.6 MPa for 1 to 10 d. The weight loss in alumina ceramics was mainly attributed to the dissolution of SiO₂ and Na₂O grain-boundary impurities. Intergranular corrosion proceeded in the alumina ceramics by preferential attack at the grain boundaries. The extent of the strength reduction for corroded alumina ceramics was related to the impurity level in the alumina ceramics.     

In Situ Observation of Deformation in Semi-solid Fe-C Alloys at High Shear Rate

Synchrotron X-ray radiography at 125 frames per second was used to study deformation mechanisms in semi-solid Fe-C alloys at high solid fraction and shear strain rates of 10^?1/s. An image correlation approach was also used to quantify the shear strain fields and study shear-induced dilation and the origin of shear cracking. It was shown that, at high solid fraction (90 to 93 pct solid), rearrangement including rotation and translation of solid particles became restricted and shear strain localized into narrow liquid-filled channels/fissures. Shear cracking was shown to originate from inadequate liquid flow into the expanding spaces between solid particles caused by shear-induced dilation. At lower solid fraction (~85 pct solid), solid particles rearranged with a significantly higher component of rotation leading to more shear-induced dilation and a wider shear band.     

A High-Speed Optical Data Highway for Industrial Control Systems

Recent application of distributed control systems to large-and medium-scale industrial plants requires effective and high-speed communication among the control devices each other to ensure high-performance operation.     

Cycle characterizations of LiMxMn2−xO4 (M=Co, Ni) materials for lithium secondary battery at wide voltage region

LiM_xMn_2−xO₄ (M=Co, Ni) materials have been synthesized by a melt-impregnation method using γ-MnOOH as the manganese source. Highly crystallized LiM_xMn_2−xO₄ compounds were synthesized at a calcination temperature of 800°C for 24 h in air. All compounds show a single phase except for LiNi_0.5Mn_1.5O₄ based on the X-ray diffraction (XRD) diagram. With the increase of the doping content from 0.1 to 0.5, the capacity of doping materials decreases mainly in the 4 V region.

Although LiM_0.5Mn_1.5O₄ (M=Co, Ni) compound shows a small capacity in the (3+4) V region compared with parent LiMn₂O₄, it is a very effective material in reducing capacity loss in the 3 V region that is caused by the Jahn–Teller distortion. The doping of Co and Ni ions in the LiMn₂O₄ cathode material promotes the stability of this structure and provides an excellent cyclability.     

Fir laser emissions from population inversion transition by TEA-CO2 laser pumping

In this paper, the numerical analysis is given which is applicable for a TEA-CO₂ laser pumping in search of effective pumping method. The analysis also can estimate the optimum pressure for a given molecule and a given pulse laser. Also we report in this work many FIR laser emissions from population inversion transition which have never observed before using a TEA-CO₂ laser.