Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Return Link Systems for Wireless Mobile Camera Using 42 GHz-Band with Frequency and Space Diversity Techniques

In this paper, return link systems for wireless mobile camera using 42 GHz-band in multipath fading environments are proposed. The return link systems for wireless mobile camera require wireless transmission with high reliability as same as the conventional wired camera systems. The proposed return link systems achieve transmission with high reliability by taking into consideration frequency and space diversity techniques. The proposed systems can be classified as 3 three types of return link systems according to diversity techniques： FD （frequency diversity） systems, SD （space diversity） systems and FD＋SD system （frequency and space diversity）. Computer simulations are carried out in order to confirm the effectiveness of the proposed return link systems. It is confirmed that the proposed three types of return link systems have an advantage about BER performances and effectively exploit frequency and space resources.     

A Numerical Method of Macrosegregation Using a Dendritic Solidification Model,and Its Applications to Directional Solidification <Emphasis Type=Italic>via</Emphasis> the Use of Magnetic Fields

A numerical method for analyzing solidification phenomena of multicomponent alloys is presented. This method consists of macroscopic transport governing equations expressed in terms of a nonlinear multicomponent alloy model, which is coupled with the microscopic dendritic solidification model to estimate permeability. Numerical simulations were performed for channel segregation in a steel ingot and for freckles in a Ni-base IN718 remelted ingot and in Ni-10 wt pct Al directionally solidified (DS) ingots. The results show good agreement with experimental observations. The electromagnetic (EM) braking effect by static magnetic field was incorporated into the numerical method, and the anisotropic behavior of magnetic field was investigated on the DS Ni-10 wt pct Al ingots. Application of relatively low magnetic fields in the transverse to the growth direction (B _x or B _y ) resulted in formation of distorted freckles as a result of the nonuniform liquid flow induced in the transverse direction. It is shown that a considerably high magnetic field is required to suppress the distorted freckles and other freckles developed in longitudinal direction. However, there is a risk of the breakdown of DS. On the other hand, when applying the magnetic fields parallel to the growth direction (B _z ), the number of freckles inversely increased at low magnetic fields, but the freckles were eliminated by about the same level of high magnetic field as that of B _x or B _y . Because the parallel magnetic field suppresses the liquid flow vector components uniformly within the transverse plane, the nonuniform flow does not occur in the transverse directions. As a result, it suppresses the flow in the growth direction. It is envisioned that the application of the parallel magnetic field is beneficial in the commercial production of DS castings.     

Compact Tunable Narrowband Terahertz-Wave Source Based on Difference Frequency Generation Pumped by Dual Fiber Lasers in MgO:LiNbO<Subscript>3</Subscript>

We demonstrate a high-average-power, single longitudinal-mode, and tunable terahertz (THz)-wave source based on difference frequency generation (DFG) in a MgO:LiNbO₃ (MgO:LN) crystal. The waves for DFG are generated using a pair of Yb-doped pulsed fiber lasers with a master oscillator power fiber amplifier configuration. The average power of the THz-wave output reaches 450 μW at 1.07 THz (280 μm) at a linewidth of 7.2 GHz, and the tunability ranges from 0.35 to 1.07 THz under the pulse repetition frequency of 500 kHz. A short burn-in test of the THz wave is also carried out, and the output power stability is within ± 5% of the averaged power without any active stabilizing technique. The combination of MgO:LN-DFG and stable and robust fiber laser sources is highly promising for the development of high-average-power THz-wave sources, particularly in the high transmission sub-THz region. This approach may enable new applications of THz-wave spectroscopy in imaging and remote sensing.     

Assessing material qualities and efficiency limits of III–V on silicon solar cells using external radiative efficiency

The paper presents a quantitative approach to the investigation and comparison of the material qualities of III–V on silicon (III–V/Si) solar cells by using external radiative efficiencies. We use this analysis to predict the limiting efficiencies and evaluate the criteria of material quality in order to achieve high‐efficiency III–V/Si solar cells. This result yields several implications for the design of high‐efficiency III–V/Si solar cells. Copyright © 2016 John Wiley & Sons, Ltd.     

High‐Yield Preparation,Versatile Structural Modification,and Properties of Layered Cobalt Hydroxide Nanocones

A low‐cost oil bath synthetic route is presented to produce uniform and highly crystalline layered cobalt hydroxide nanocones (NCs) intercalated with dodecyl sulfate anions (C₁₂H₂₅OSO₃^?, DS^?). A new exfoliating procedure, by gradually unravelling/unzipping these NCs through heat treatment in formamide‐water binary solution, is developed to prepare unilamellar nanosheets. Moreover, the NCs can be readily modified with various inorganic or organic anions via a conventional anion‐exchange process at ambient temperature. The exchanged product, for example, NO₃^?–intercalated NCs, can be more easily and rapidly transformed into cobalt oxides (e.g., Co₃O₄ and CoO) than the original DS^?–intercalated form while retaining a conical feature. Both the cobalt hydroxide NCs and exfoliated nanosheets are electrochemically redoxable, exhibiting a Faradaic pseudocapacitive behavior. The magnetic measurements further reveal both antiferromagnetic behaviors for transformed Co₃O₄ and CoO NCs. Their Néel temperature values are lower than those of bulk oxides due to finite size and geometric confinement effect. The peculiar conical feature of NCs with a hollow interior and tunable layer spacing, as well as exfoliated unilamellar nanosheets with all surface area exposed, may show promise for potential applications in electrochemical energy storage and magnetic devices.     

Size Effects on the Mechanical Properties of Nanoporous Graphene Networks

It is essential to understand the size scaling effects on the mechanical properties of graphene networks to realize the potential mechanical applications of graphene assemblies. Here, a “highly dense‐yet‐nanoporous graphene monolith (HPGM)” is used as a model material of graphene networks to investigate the dependence of mechanical properties on the intrinsic interplanar interactions and the extrinsic specimen size effects. The interactions between graphene sheets could be enhanced by heat treatment and the plastic HPGM is transformed into a highly elastic network. A strong size effect is revealed by in situ compression of micro‐ and nanopillars inside electron microscopes. Both the modulus and strength are drastically increased as the specimen size reduces to ≈100 nm, because of the reduced weak links in a small volume. Molecular dynamics simulations reveal the deformation mechanism involving slip‐stick sliding, bending, buckling of graphene sheets, collapsing, and densification of graphene cells. In addition, a size‐dependent brittle‐to‐ductile transition of the HPGM nanopillars is discovered and understood by the competition between volumetric deformation energy and critical dilation energy.     

Spectroscopic and Photoluminescent Properties of Indium Zinc Oxide (IZO) and IZO/Ag/IZO Sandwiched Film

We report the ellipsometric and photoluminescence (PL) properties of Indium zinc oxide (IZO) films, which were grown by radio frequency sputtering under Ar and O₂ atmospheres. IZO films grown under an O₂ atmosphere (IZO (O₂)) showed enhanced PL properties when compared to the films grown under an Ar atmosphere (IZO (Ar)), particularly with respect to the band-edge emission. The enhancement of band-edge emission can be attributed to the reduction in the non-emissive defect states related to oxygen vacancies, which were repaired by sputtering under O₂ atmosphere, whereas the PL enhancement in green region is probably due to the formation of the different types of defects under the excess oxygen environment. This was also supported by the results of time-resolved PL measurements, where the band-edge emission of IZO (Ar) showed rapid decay with a 50 ps lifetime, which indicates the dominance of the relaxation pathway to underlying defect states. In contrast, the PL decay profiles of IZO (O₂) for band-edge and emissive defect states showed moderate decay with time-constants of 2.3 ns and 5.7 ns, respectively. The exciton relaxation dynamics were sensitive to the presence and its kinds of defect states, which were controlled by the growth conditions.     

Characterization,Cathodoluminescence, and Field‐Emission Properties of Morphology‐Tunable CdS Micro/Nanostructures

High‐quality, uniform one‐dimensional CdS micro/nanostructures with different morphologies—microrods, sub‐microwires and nanotips—are fabricated through an easy and effective thermal evaporation process. Their structural, cathodoluminescence and field‐emission properties are systematically investigated. Microrods and nanotips exhibit sharp near‐band‐edge emission and broad deep‐level emission, whereas sub‐microwires show only the deep‐level emission. A significant decrease in a deep‐level/near‐band‐edge intensity ratio is observed along a tapered nanotip towards a smaller diameter part. This behavior is understood by consideration of defect concentrations in the nanotips, as analyzed with high‐resolution transmission electron microscopy. Field‐emission measurements show that the nanotips possess the best field‐emission characteristics among all 1D CdS nanostructures reported to date, with a relatively low turn‐on field of 5.28 V µm^?1 and the highest field‐enhancement factor of 4 819. The field‐enhancement factor, turn‐on and threshold fields are discussed related to structure morphology and vacuum gap variations under emission.     

Fir laser emissions from population inversion transition by TEA-CO2 laser pumping

In this paper, the numerical analysis is given which is applicable for a TEA-CO₂ laser pumping in search of effective pumping method. The analysis also can estimate the optimum pressure for a given molecule and a given pulse laser. Also we report in this work many FIR laser emissions from population inversion transition which have never observed before using a TEA-CO₂ laser.